There are a few other methods for opening a Toyota Camry’s trunk if the button on the key fob isn’t functioning:
Find a trunk latch, please.
* On the driver’s side of the car, your Camry can feature a manual latch or lever to open the trunk (usually beside the gas tank lever or the bottom left-hand side of the dashboard).
Fold the back bench down.
* The back seats of your Camry can be folded down and the trunk opened by pulling on hooks that are located close to the headrests.
You can manually open your trunk by gaining access to the trunk latch through your car’s underside if you don’t mind putting in a little extra work. You’ll need a screwdriver for this, but all it requires is removing the bottlecap-sized rubber cover that is located underneath the driver’s side of your automobile. The trunk latch is directly above this cover.
You might also attempt removing the door cylinder lock, but this approach needs additional tools and involves a number of difficult stages.
Fixing auto issues might be challenging.
Jerry makes saving money on your auto insurance easier because of this. Jerry is a certified broker and insurance comparison software that enables you to quickly compare dozens of competitive quotes from renowned companies like Progressive, Allstate, and Geico. When you’re ready to switch, compare rates side by side and let Jerry do the rest.
In addition to helping you terminate your existing insurance, we can handle the paperwork and phone calls for you. What’s best? Users of Jerry save $887 annually on vehicle insurance on average!
In This Article...
Without a key, how do you open the trunk of a Toyota Camry?
If you try this procedure on your own, there’s a risk you won’t be able to put everything back in its proper place, so be sure to follow the instructions and watch the instructional video first. When your Camry’s doors can be unlocked but the alarm system prohibits you from opening the trunk and your keys are inside, it still functions.
- On the driver’s door, find the plastic plug. When the door is closed, it is level with the handle and faces the B-Column. Remove it, then store it securely.
- Peer through the gap.
- Inside is a Torx head screw. Locate the right size Torx screwdriver, then remove the screw. Although there are safeguards in place to stop the screw from hitting the door, proceed with caution just in case.
- To get to the key cylinder, pull the door handle. The key cylinder must be removed from the socket, however doing so can be challenging due to how tightly it fits. Avoid breaking off the handle or scratching the paint. As a temporary layer of security, some masking tape will be fantastic.
- The cylinder head will emerge facing the car’s rear. Once you’ve opened the trunk, you won’t be able to put it back in any other way, so keep this in mind.
- Take a look at the key cylinder’s tip. The plus-shaped lock mechanism will be visible. When you look inside the cylinder slot, you will see a plus-shaped indentation where the cylinder should fit.
- Carefully place a flathead screwdriver into the cylinder slot. Rotate it to lock the car and then to unlock it once it is positioned inside the plus-shaped indentation.
- When you push the trunk release button, the trunk instantly opens!
It is far more difficult to put the cylinder lock back in place than it was to remove it. Let’s follow the procedures to put the door back in working order.
- Slide the cylinder back in from the same angle it was inserted by raising the door handle. Take your time, be gentle, and avoid using forcethis will involve plenty of twisting, pivoting, and turning.
- Insert the key, turn it, then gradually apply pressure to the cylinder until it is facing the proper direction and the door handle can slide onto it. The cylinder should then automatically fall into position.
- Tighten the Torx screw while the key is still within the lock. If the screw isn’t holding, you’ll use the key to wriggle it into place until it does, causing everything to settle into its proper position.
- After replacing the plastic stopper, the procedure is complete.
Without a key, how do you open a trunk from the outside?
Oops! Fortunately, as long as that isn’t locked, too, you can use the trunk release button or lever inside your car to open the trunk without a key.
The best approach to open the trunk if you’ve completely locked yourself out of the car is still through the cabin. To open your automobile door, you have two options: call a locksmith or use a slim jim.
Most auto parts stores sell slim jims, often known as lock picks. To utilize it to retrieve your keys from the trunk, follow these steps:
- Between the window and the window trim, press the pick down.
- With the pick, search the area for a rod.
- The automobile door should then open after using the pick to raise the rod.
- Now look inside your car for the lever or button that releases the trunk.
- To unlock the trunk, push or pull the lock.
Therefore, you have a few options if you’ve locked your keys in the trunk. If you’re locked out of the trunk as well, you can either use a slim jim by following the methods above, call roadside help, or open the trunk using the trunk release button or lever in the cabin.
If you have a history of bad luck, Jerry’s roadside assistance membership can help you avoid the hassle of auto accidents. For just $6.99 a month, Jerry joins with Urgently to offer you the best roadside assistance available, including features like towing, lockout service, and a mechanics hotline.
Without a key from the outside Toyota Corolla, how do you open a trunk?
Use the trunk release lever on the driver’s side of your Toyota Corolla to open the trunk quickly and easily. Use a slim jim to get into your automobile if you’ve locked yourself out of the cabin as well. You can also call a locksmith.
With a dead battery, how do you open the trunk of a Toyota Camry?
Pull the lock tab up and use the outside door handle to unlock the door. Your car features a release mechanism on the right corner of the trunk that allows the trunk to be opened from the inside as a safety precaution.
Can I access the inside of my trunk?
You may access your trunk from the inside of the car. To do this, press the Trunk Release switch, which is next to the door and beneath the driver’s seat.
Why won’t the button on my trunk unlock it?
When you press the inside trunk release button on the fob or the trunk lock actuator and nothing happens, this is another common clue that there is a problem. This could be a sign of a problem with the vehicle’s battery or with the electronics connecting to the actuator, such as a shorted fuse or wire. Since there are numerous potential issues that could result in this problem, it is recommended to get in touch with a nearby mechanic so they can accurately diagnose and resolve the problem as soon as possible.
Can you pick the lock on a car trunk?
I’m sorry you locked your keys in the trunk, but there isn’t a reliable way to open a car trunk lock without causing harm to the automobile. To reach the trunk, you should either call a locksmith or open a different door.
You can pry the lock open with a screwdriver if you don’t mind causing damage or replacing the lock. You may also use a slim jim, which you can get from most auto parts stores.
With a slim jim, access the trunk as follows:
- Swipe the slim jim’s hook end between the trim at the handle and the passenger-side glass.
- Find the lock rod that joins the handle to the locking mechanism by feeling around.
- Pull up while securing the thin jim to the rod. The door ought to be unlocked after you hear a click.
- Alternately, you can fold down the back seats and use the emergency release lever to open the trunk by unlocking the other doors and opening it normally.
Remember that not all vehicles can be repaired with slim jims, and even if they can, you risk damaging the vehicle. The best way to open the trunk is typically to hire a locksmith, and if your automobile insurance includes towing and labor coverage, the visit might even be paid for.
Finally, utilize Jerry, a free insurance comparison app that shops for low costs with more than 50 different insurance companies, to discover an insurance policy that includes towing and labor coverage or just to make sure you’re not overpaying for coverage. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have.
How do you use a screwdriver to open a trunk?
The screwdriver must be wedged into the lock and moved left and right until the trunk is unlocked. This is not advised, though.
If you use a screwdriver to open the trunk of your car, you risk damaging the paint, and replacing paint can cost hundreds of dollars. You also run the chance of damaging the lock. To solve the problem, you might want to contact a locksmith.
With a roadside assistance membership, you can avoid the inconvenience of lockouts and breakdowns. Try Jerry if you want roadside assistance at a great price. For just $6.99 a month, Jerry delivers the best roadside help in the business, including features like towing, lockout service, and a repair hotline.