A standard door key or a smart key can be used to open a Toyota Camry. The key fob, often known as a smart key, is used to operate and unlock the car using keyless entry. A battery and a small circuit board are both inside the key fob. The battery needs to be changed sometimes for the key fob to operate correctly. Although the procedure is simple and should be doable by you, your Toyota dealer can change the battery for you. According to the Lean Crew website, Radio Shack additionally sells fob batteries in addition to the dealer.
In This Article...
Step 1
firmly grasp the Toyota Camry key fob. According to the Lean Crew website, the fob can be unlocked using either the point of the standard key or a flat-head screwdriver. When the two sides of the fob separate, carefully twist the screwdriver or key into the seam of the fob.
Step 2
To gently remove the circuit board out of the fob case, use the screwdriver or key. Adhesive tape is used to secure the circuit board so that it won’t accidentally slip out. Turn the circuit board over once it has been taken out to reveal the battery.
Step 4
According to the graphic on the inside of the key fob, insert the fresh battery into the device. It won’t operate unless the battery is properly fitted. To hold the new battery in place, position the three supports.
Replace the circuit board in the key fob by flipping it over and inserting it firmly. Align the key fob’s two sides, then push firmly until they connect. Test the key fob to make sure the new battery is functioning after securing it.
The battery in my Toyota Camry key has to be changed.
How to Replace the Battery in a Toyota Smart Key
- To remove the key cover, use a flathead screwdriver or a key.
- Battery Cover should be removed.
- Get rid of the dead battery.
- Place the Plus+ Side Up while installing the new battery.
- Put a new battery cover on.
- Switch out the key cover.
- Examine the key fob.
How is a Toyota keyless key opened?
Over the key portion of your key fob is a tiny metal button. Pull out the key and press that button. Unlock the fob. Open the fob by inserting a small screwdriver or another flat tool into the little slot that the key fits into.
What sort of battery is needed for a Toyota Camry key fob?
A CR2032 battery, which you can get in shops and online, is used by the majority of Toyota models. These batteries are really inexpensive, usually costing less than $5. Replace the battery in your Toyota key fob within the casing, then cap it off.
How long does the battery in a Toyota key fob last?
When your Toyota key fob’s battery is running lowthe typical battery life is one to two yearsan alert will sound when the engine is turned off.
How is a key fob separated?
Key fobs make it simple to get into your car. The key fob’s capacity to operate remote controls will be lost as soon as the battery is low or dead. Key fobs make it simpler to enter cars. With this device, opening the doors and the trunk or tailgate is simpler than before. Some have the key integrated right in, while others are independent from the key. Only the fob’s ability to control remote functions requires the battery. The battery is simple to replace and is available at any supermarket, drugstore, or retailer of car parts.
Step 1:
Activate your key fob. Typically, all you need is a firm fingernail to pry open your key fob. If it doesn’t work, carefully pry it open with a small flathead screwdriver.
Pry lightly from multiple places all around the key fob to prevent cracking the shell.
The remote must first be separated from the key in some all-in-one key fob/key combinations, as seen below. The process for changing batteries is the same.
Step 2:
the name of your battery. If you haven’t already bought a replacement battery, you can see the battery type and number printed on it now that the fob has been opened.
Step 3:
Make sure the fob shell completely snaps together as you carefully reassemble it.
How much does a new Toyota key fob cost?
Replacing the entire key fob on a Toyota Normally, this product costs between $200 and $350. Make sure to look for any current parts offers that can reduce the cost of your entire Toyota key replacement.
Is there a battery inside a Toyota Camry key?
We’re crossing our fingers that a fresh battery fixes it for you because replacing a fob can cost several hundred dollars! The good news is that’s probably all you’ll need.
A new CR2032 battery and a flathead screwdriver or another pry tool are needed to change the vehicle key battery on a Toyota Camry. As follows:
- To release the metal key, first push on the side of the key fob. Put the key away in a secure location.
- Pry apart the key fob’s two parts using your pry tool.
- The outdated battery should be visible within the key fob. The positive and negative ends of the battery should be fitted with the positive end on top and the negative end on the bottom.
- After removing the old battery, gently insert the new one into the key fob. Avoid touching the terminals because if you do, your battery life could be harmed.
- Slide your metal key back into position after snapping the two parts together.
- You can now check your key fob’s functionality by using it.