If you try this procedure on your own, there’s a risk you won’t be able to put everything back in its proper place, so be sure to follow the instructions and watch the instructional video first. When your Camry’s doors can be unlocked but the alarm system prohibits you from opening the trunk and your keys are inside, it still functions.
- On the driver’s door, find the plastic plug. When the door is closed, it is level with the handle and faces the B-Column. Remove it, then store it securely.
- Peer through the gap.
- Inside is a Torx head screw. Locate the right size Torx screwdriver, then remove the screw. Although there are safeguards in place to stop the screw from hitting the door, proceed with caution just in case.
- To get to the key cylinder, pull the door handle. The key cylinder must be removed from the socket, however doing so can be challenging due to how tightly it fits. Avoid breaking off the handle or scratching the paint. As a temporary layer of security, some masking tape will be fantastic.
- The cylinder head will emerge facing the car’s rear. Once you’ve opened the trunk, you won’t be able to put it back in any other way, so keep this in mind.
- Take a look at the key cylinder’s tip. The plus-shaped lock mechanism will be visible. When you look inside the cylinder slot, you will see a plus-shaped indentation where the cylinder should fit.
- Carefully place a flathead screwdriver into the cylinder slot. Rotate it to lock the car and then to unlock it once it is positioned inside the plus-shaped indentation.
- When you push the trunk release button, the trunk instantly opens!
It is far more difficult to put the cylinder lock back in place than it was to remove it. Let’s follow the procedures to put the door back in working order.
- Slide the cylinder back in from the same angle it was inserted by raising the door handle. Take your time, be gentle, and avoid using forcethis will involve plenty of twisting, pivoting, and turning.
- Insert the key, turn it, then gradually apply pressure to the cylinder until it is facing the proper direction and the door handle can slide onto it. The cylinder should then automatically fall into position.
- Tighten the Torx screw while the key is still within the lock. If the screw isn’t holding, you’ll use the key to wriggle it into place until it does, causing everything to settle into its proper position.
- After replacing the plastic stopper, the procedure is complete.
In This Article...
With a dead battery, how do you open the trunk of a Toyota Camry?
Pull the lock tab up and use the outside door handle to unlock the door. Your car features a release mechanism on the right corner of the trunk that allows the trunk to be opened from the inside as a safety precaution.
Without the key from the outside, how do you open a trunk?
Oops! Fortunately, as long as that isn’t locked, too, you can use the trunk release button or lever inside your car to open the trunk without a key.
The best approach to open the trunk if you’ve completely locked yourself out of the car is still through the cabin. To open your automobile door, you have two options: call a locksmith or use a slim jim.
Most auto parts stores sell slim jims, often known as lock picks. To utilize it to retrieve your keys from the trunk, follow these steps:
- Between the window and the window trim, press the pick down.
- With the pick, search the area for a rod.
- The automobile door should then open after using the pick to raise the rod.
- Now look inside your car for the lever or button that releases the trunk.
- To unlock the trunk, push or pull the lock.
Therefore, you have a few options if you’ve locked your keys in the trunk. If you’re locked out of the trunk as well, you can either use a slim jim by following the methods above, call roadside help, or open the trunk using the trunk release button or lever in the cabin.
If you have a history of bad luck, Jerry’s roadside assistance membership can help you avoid the hassle of auto accidents. For just $6.99 a month, Jerry joins with Urgently to offer you the best roadside assistance available, including features like towing, lockout service, and a mechanics hotline.
A trunk lock can you pick?
I’m sorry you locked your keys in the trunk, but there isn’t a reliable way to open a car trunk lock without causing harm to the automobile. To reach the trunk, you should either call a locksmith or open a different door.
You can pry the lock open with a screwdriver if you don’t mind causing damage or replacing the lock. You may also use a slim jim, which you can get from most auto parts stores.
With a slim jim, access the trunk as follows:
- Swipe the slim jim’s hook end between the trim at the handle and the passenger-side glass.
- Find the lock rod that joins the handle to the locking mechanism by feeling around.
- Pull up while securing the thin jim to the rod. The door ought to be unlocked after you hear a click.
- Alternately, you can fold down the back seats and use the emergency release lever to open the trunk by unlocking the other doors and opening it normally.
Remember that not all vehicles can be repaired with slim jims, and even if they can, you risk damaging the vehicle. The best way to open the trunk is typically to hire a locksmith, and if your automobile insurance includes towing and labor coverage, the visit might even be paid for.
Finally, utilize Jerry, a free insurance comparison app that shops for low costs with more than 50 different insurance companies, to discover an insurance policy that includes towing and labor coverage or just to make sure you’re not overpaying for coverage. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have.
How do you use a screwdriver to open a trunk?
The screwdriver must be wedged into the lock and moved left and right until the trunk is unlocked. This is not advised, though.
If you use a screwdriver to open the trunk of your car, you risk damaging the paint, and replacing paint can cost hundreds of dollars. You also run the chance of damaging the lock. To solve the problem, you might want to contact a locksmith.
With a roadside assistance membership, you can avoid the inconvenience of lockouts and breakdowns. Try Jerry if you want roadside assistance at a great price. For just $6.99 a month, Jerry delivers the best roadside help in the business, including features like towing, lockout service, and a repair hotline.
Without a key, how do you open the trunk of a Toyota Corolla?
Use the trunk release lever on the driver’s side of your Toyota Corolla to open the trunk quickly and easily. Use a slim jim to get into your automobile if you’ve locked yourself out of the cabin as well. You can also call a locksmith.
Without a key, how do you unlock a door?
Everyone has encountered the inconvenience of being unable to enter their own house, workplace, or vehicle due to forgetting, misplacing, or losing their keys. Therefore, you turn to a locksmith when you need to force open a locked door. Although they are unquestionably adept at what they do and can be quite helpful, they aren’t always accessible. Fortunately, just because you’ve locked yourself out of your own house or business doesn’t mean you have to go through a lot of hassle. There is a simpler method to enter again, and the following are some simple strategies to assist you open your door without a key:
Use a bobby pin
One of the most popular methods for opening doors is the bobby pin lock pick. It is referred to as a “rake pick” and can be used to unlock any door with tumbler locking mechanisms. One of the most fundamental and user-friendly is this.
This practical hack’s trick is as easy as using a bobby pin. But doing it is not that simple. Finding the ideal candidate, who will facilitate the process, is the challenging part. You must locate a bobby pin that is tiny and extremely flexible for this life hack to work (the more flexible, the better).
Use a screwdriver
It’s simple to open a door without a key by using a screwdriver. Find the one that fits your lock the best, then slide it into the little space between the door and frame just above the handle or knob. Simply place the tip of the screwdriver into the space between the bottom of the door and the floor while holding it in your right hand. Once you hear a click, turn counterclockwise. Repeat the clockwise turn until you hear a second click. Open the door at last.
Use a knife
If you know how, you can use a knife to open your door. You must first unlock the lock. Use your knife to wedge it between the top of the keyhole and the top of the actual lock to accomplish this. To unlock the blade, you will then need to gently press down on it.
Lock picking
Lock picking, also known as lock opening, is the technique of opening a lock without the use of the original key by dissecting and manipulating the lock’s parts. There are many different tools available to do lock picking; their designs range greatly from basic probes to highly specialized tools created specifically for one particular make and type of lock.
Use a credit card
Sometimes you have to use an unusual approach to finish the work. A brand-new method for picking locks is becoming popular. It only needs a credit card and one of those tiny tool kits you can get at Walmart; it doesn’t call for any specialized knowledge or equipment. The actual method is straightforward: just push the credit card against the strike plate’s bottom by sliding it into the door jamb. By doing this, you’ll be able to push the doorknob or open the door normally by forcing the bolt back.
Use a Bump key
The majority of locks can be unlocked with a bump key, which is a relatively basic tool. An allen wrench or toothpick is used to bump one or more pins once the tool has been put into a keyway. This makes it possible to open doors without a key. In an emergency, you can employ this technique.
Remove the hinges
By removing the hinges, you may unlock your door without a key. Hinges are used to keep things where they belong by preventing doors from being opened. When the hinges are taken off, though, nothing can stop you from opening up and making spaces for fresh ideas to enter. All you need for that is a hammer, a puller, and a hinge remover. These items are conveniently accessible in the market or even at home.
Unable to unlock your door? Call Locksmith Monkey in Portland
You know how difficult it may be to try to get back inside if you’ve ever locked yourself out of your car or house. A backup key should always be kept outside and hidden in case of an emergency, but what if you lose that as well? It can appear that there is no remedy if the lock is broken or blocked, making it impossible for you to even open the door. However, the above-mentioned solutions are some intelligent ways to return to your own house without damaging anything.
Is there a button to open the trunk?
Pushing the Trunk Release button from inside the car will open the trunk lid. To the left of the steering wheel on the instrument panel, there is a button.
Is there a trunk release inside?
With effect from September 1, 2001, this document creates the new Federal Motor Vehicle Safety Standard (FMVSS) No. 401, Internal Trunk Release, which mandates that all brand-new passenger cars with trunks be fitted with a release latch inside the trunk compartment. This document also authorizes the installation of an alternate system, such as a passive trunk release system, which would automatically unlock the trunk lid in the event that a person entered the trunk. Eleven kids perished in the summer of 1998 after unintentionally being trapped in a car’s trunk. This new standard will provide kids and other people a chance to escape a passenger car trunk alive if they become trapped inside.