The Toyota C-HR may be customized quite easily. Although performance improvements are nothing new, there are several important foundational elements to take into account to guarantee you unlock your vehicle’s full potential. Here are a few worthwhile modifications for your car’s handling and horsepower.
In This Article...
Suspension Set Up
Make the suspension faster than the engine at all times. Being able to turn and halt will always be more crucial than being able to travel quickly. A properly tuned Toyota C-HR suspension can help you out-handle your rivals and, depending on the type of racing you do, even improve your times. Until the suspension is changed with a performance setup, such as coilovers, a car with softer suspension from the factory will nearly always handle poorly. Old, worn-out suspension should be replaced since it greatly impairs handling, especially in spirited driving where handling is crucial.
Coilover Basics
In order to lower your center of gravity and stiffen up your chassis for better handling and control, coilovers can be used to adjust the height and damping of your Toyota C-HR. It’s also a crucial step in enabling you to turn your car into a true performance machine, converting your changes into palpable wheel horsepower. This makes your car look sportierand better, in our opinion.
Choosing the appropriate coilover can be challenging because there are so many different coilover brands and models available. When purchasing Toyota C-HR coilovers, you should pay close attention to the following four things.
Spring Rates 1.
An essential component of your suspension system are springs. They regulate the car’s ability to bounce, absorb shocks, and produce little body roll when it is loaded. Higher spring rates need to be compressed with more effort, which limits how far the suspension can travel. When you brake, accelerate, or turn your car, the body of the vehicle moves. By minimizing body movement, you improve handling predictability and efficiently distribute the cornering load across all four tires, improving grip. With much stiffer springs than OEM suspension, most aftermarket coilovers improve handling and provide the driver a better sense of the road and their vehicle when engaging in intense driving.
2. Adjustability of the Spring and Valving
The typical reason people buy a set of coilovers for their Toyota C-HR is to lower the vehicle. Performance will be enhanced and excessive body roll will be reduced thanks to the lower center of gravity. High grade coilovers must have the capacity to alter ride height, spring preload, and damping. You may fine-tune how your car behaves and give it the ideal ride height for your application by adjusting the coilovers. It’s also crucial to have the option to switch out the springs for stiffer ones because track cars require far higher spring rates than street cars do in order to increase grip, enhance handling, and lessen body roll. To avoid a bouncy ride, which is ultimately harmful to handling, it’s crucial to match your spring rate with your damping whether you switch to a stronger or softer spring.
Third Mount
A mount that fastens the coilover’s top to the automobile and holds everything together is located on top of the coilover. Between the mount and strut assembly are two distinct types of bushings, either rubber or pillowball type, which are together referred to as the “Top Mount.” Since rubber bushings deflect more and are a major contributing factor to the loss of suspension precision, it should come as no surprise that OE manufacturers utilize them. Most OEM struts have soft rubber on them, which allows for significant energy deflection. A more rigid rubber mount increases durability and lessens energy deflection. A pillowball bushing is a metallic spherical joint that does not move at all when cornering forces are applied, unlike a traditional rubber bushing. The suspension and steering will feel much more precisely as a result.
Fourth, Monotube Design
There are two types of dampers you will find inside any coilover: monotube and twin tube. An inner and an outer tube are used in a “twin tube,” if you will. The piston shaft, valve, and oil are kept inside the inner tube. Nitrogen gas and damper oil are contained in the outer tube. The piston forces oil out of the inner tube by its valve and into the outer tube when the suspension is squeezed, as seen in the following illustration. The oil is drawn back into the inner tube from the outside tube as the piston repositions itself. Because it allows for more suspension stroke and enhances ride quality, the majority of OEM suspension uses the twin tube damper setup.
Monotube dampers separate the liquid from the gas with a floating piston while holding the gas and the shock in one tube. The construction forces the damper piston to push oil via chambers and valves on the piston itself. By compressing slowly through small bumps and more quickly through larger bumps, the gas can be compressed and react more swiftly with this design. The Monotube differs from typical twin tube dampers in that it can be used either side up, which is a very significant feature. The Monotube contains more fluid, has greater heat dissipation, and enhances the damper’s reactivity as compared to the twin tube design.
The Monotube design outperforms the twin tube design for the optimum performance on the road or on the track.
Air Suspension
Air suspension is another excellent option if you don’t need Toyota C-HR Suspension options made exclusively for severe track use. Many air suspension kits on the market today, though mostly utilized for street or show cars, are robust enough to endure light track use as well. While opinions on coilovers versus air suspension can be hotly contested, in our opinion, air suspension offers the best height adjustability for the Toyota C-HR.
Sway Bars
Sway bars are another factor to take into account while upgrading your Toyota C-HR. Nearly all factory automobiles are set with an understeer leaning by default. They are safer and easier to drive at their maximum as a result. For instance, a stock Mitsubishi EVO 8 (AWD Turbo) has a 22mm rear sway bar and a 24mm front sway bar. The objective is that upgrading the rear bar should be one of the first changes you undertake to bring the car to a neutral position, even though the EVO can need several upgrades right out of the box. We replaced the rear bar on our EVO 8 with a 25mm bar after seeing that the bar itself almost completely fixed the car’s understeering problems. The size of a bar can have a huge impact on how it handles. Remember that when you lower a car, the suspension geometry changes, which can lead to faulty sway bar preloading, unexpected handling, or, in the worst case, damage. Use movable endlinks to properly preload the sway bar to fix this.
We strongly suggest Voodoo13; you can view their selection of Toyota parts here.
Brakes
Speeding up is enjoyable, but how well can you stop when you’re at your strongest? For every build, this must be taken into account. How well you can brake and how frequently you can do so will make a significant impact whether you’re creating a race car or a street car. Larger calipers with extra contact pins in the caliper are used in big brake systems to hold and compress bigger brake pads. You’ll need to press the brake pedal for less time to stop if the brake rotor has greater brake pad surface. Additionally, it prevents brake fade, which is the buildup of heat and energy from the brakes that leads to sliding after a long period of operation. Less brake fade is caused by larger calipers’ ability to remove heat from the braking action. A Toyota C-HR Big Brake Kit is essential for any build since it allows you to brake effectively, safely, and stylishly.
Summary
Although the list of Toyota C-HR modifications is virtually unlimited, we hope that this has given you a decent place to start. Check out our complete blog here to discover more about the performance upgrades we advise, such as exhausts and tuning.
The Toyota C-HR is quick.
The 1.8-liter C-HR accelerates from 0 to 62 mph in 11 seconds with its modest 120 horsepower. This is by no means speedy, however the 2.0-liter performs a little better, going from 0-62 mph in 8.2 seconds thanks to its 182 horsepower. Each powertrain’s top speeds are 105 and 112 mph, respectively. It’s important to keep in mind that, although being more expensive, the MINI Countryman plug-in hybrid can travel a useful 20 or so miles on electricity alone and can accelerate from 0 to 62 mph in 6.8 seconds.
What Toyota C-HR is the quickest?
What has the same exterior design as the Toyota C-HR yet can outrun most supercars on a racetrack? The daring new 600 horsepower Toyota C-HR R-Tuned concept, which was unveiled today at the SEMA aftermarket tuning event in Las Vegas, USA, is the answer.
Toyota C-HR R-Tuned
The one-of-a-kind R-Tuned concept, which served as the centerpiece of Toyota’s 18-car show of tuned and customized vehicles, was created to take the production Toyota C-natural HR’s dynamic traits and crank them up to the highest possible level. In fact, the project has surpassed the development team’s expectations and will undoubtedly upset the supercar establishment because of how exploitable the vehicle’s TNGA chassis is.
Since we began the project in late 2017, the [Toyota] C-HR R-Tuned has been driven on the track every month, according to team principal Dan Gardner.
It has probably gone through more real-world tests than nearly any other automobile made for SEMA. It’s a track-ready performance vehicle, not just a concept car for a show.
Amazingly, the Toyota C-HR R-Tuned still only has front-wheel drive, despite the addition of a limited-slip differential, race suspension, and significant aerodynamic improvements.
And given that the vehicle’s all-Toyota powertrain now generates upwards of 600bhp, these parts have a huge job ahead of them. Under the hood is a 2.4-liter, four-cylinder 2AZ-FE engine with forged and upgraded internals to handle the 23 psi of boost pressure produced by a unique Garrett turbo system. This engine is closely connected to the one used in the existing RAV4 Hybrid. The original continuously variable transmission has been replaced with a Toyota E-series five-speed manual transmission.
On display at Toyota’s booth at the SEMA event, which took place at the Las Vegas Convention Center from October 31 to November 3, 2017, is the Toyota C-HR R-Tuned.
This proposal comes after Toyota’s genre-defying SEMA concept from the previous year (shown above), in which the legendary Land Cruiser broke a land speed record to become the fastest SUV in the world.
How fast is the Toyota C-HR?
The C-four-cylinder HR’s engine could benefit from a supercharged, turbocharger, or even a large can of Red Bull because it is unable to hurl this crossover up to speed with anything resembling excitement. In our testing, the C-HR could only generate an 11.0-second saunter from 0 to 60 mph, which is much slower than the majority of its competitors. Due to a responsive throttle that propels you enthusiastically off the line when you are driving routinely around town, the lack of power is effectively concealed. However, if you press hard on the accelerator with your right foot, the engine will rev to its maximum and then remain there, droning on as you wait for the continuously variable automatic gearbox (CVT) to change gears in an attempt to offer quick forward motion. The C-HR provides a smooth ride over bumps, but it doesn’t stand out in this market. Large road irregularities cause the suspension to swiftly recover, but when you hit a length of patched or cracked pavement quickly, you’re treated to a cacophony of noise; sharp bumps cause reverberations throughout the cabin. The C-front HR’s wheels respond immediately to inputs, and the steering feels precise. The C-HR has energetic handling, well-controlled body roll, and a joyful atmosphere while you’re in the driver’s seat.
What does CHR mean in a Toyota context?
the enigmatic “The name C-HR is an abbreviation. The Toyota press release states that the C-name HR’s is “derived from Cross Hatch Run-about and Compact High Rider. “Compact high rider” makes sense as a concept. Compact goes without saying; the C-HR is a compact crossover SUV in terms of proportions. The “high rider component of the name” refers to the C-taller HR’s stance than that of a typical sedan because it is also an SUV. Due to its resemblance to the dual design philosophy of hatchbacks and crossover SUVs, the cross hatch is also quite intuitive.
C-HR Specs
The C-HR is a crossover SUV that prioritizes performance and utility. When the back seats are folded down, it offers a 19.1 cu ft of cargo space, which is standard for hatchbacks. The volume increases to 37 cu-ft when the back seats are folded down, which is comparable to the typical capacity of a two-row SUV. A 2.0-liter four-cylinder engine under the hood of the C-HR cranks out 144 horsepower and 139 lb-ft of torque. The only available drivetrain is FWD, similar to a standard hatchback or sedan.
Toyota is getting rid of the C-HR, but why?
The cost of Toyota’s smallest SUV could rise by more than $2,000 soon. Toyota’s most recent order guide indicates that the 2022 C-HR will no longer offer the LE trim, which will push base prices above $25,000. It can consequently cost more to purchase than the brand-new Toyota Corolla Cross.
Is it wise to buy a Toyota C-HR?
The Toyota C-HR is a small SUV that is affordable to operate, easy to drive, and great for people who frequently misplace their car in parking lots.
Some of these SUVs are essentially hatchbacks with a little higher suspension and a few extra plastic components. Not so with the Toyota C-HR, whose name stands for Coupe High Rider and which resembles a vehicle from the Jetsons.
Although the Toyota C-HR comes with a lot of bulky black plastic bumpers and side skirts, its angular headlights, sharply creased sides, and swooping coupe-like roofline give it a considerably sportier appearance than a typical boxy SUV. The automobile had a 2019 makeover that improved its appearance by adding scrolling LED indicators, new front and rear bumpers, and new head and tail lights.
As soon as you get inside, you’ll notice that the Toyota C-inside HR’s is just as flamboyant as its exterior and that quality has somewhat increased in 2019 thanks to the use of soft-touch plastics within the front doors.
There is a line of trim that runs from the front doors across the dashboard, and there are many embossed plastics that resemble the diamond-patterned grille of the C-HR. Unfortunately, some of these surfaceslike the lower third of the dashboard and all the plastics in the back seatfeel wonderful and soft.
Nevertheless, the Toyota has a pretty sturdy feel to it, so it’s disappointing that the infotainment system isn’t equally reliable. Although it’s not quite as simple to use as the VW Tiguan system, 2019 saw Apple CarPlay and Android Auto added to the list of available features, allowing you to forego Toyota’s system and use the much more user-friendly controls of your Apple or Android smartphone.
With the C-HRit, Toyota’s styling team really pushed the envelope; it truly stands out from other vehicles on the road. You decide whether or not that’s a good thing.
Not nearly as capacious as a Tiguan is the Toyota C-HR. Although there is enough of room for tall persons in the front, the back feels somewhat dark and dreary due to the small rear windows and sloping roofline. Additionally, the boot is considerably smaller than in virtually every other SUV of a comparable size.
The Toyota C-narrow HR’s windows also make it difficult to see out of them, but at least parking sensors are included to help you avoid low-speed bumps. You won’t struggle to maneuver it through narrow city streets because of the steering’s great lightness, and the suspension does a decent job of smoothing out bumps and potholes.
Driving it isn’t quite as enjoyable as driving the Peugeot 3008.
The wind and tire noise are to blame for that, but the Toyota C-HR handles winding roads surprisingly well. Your passengers shouldn’t experience any motion sickness because it has excellent traction and scarcely leans in tight turns.