How To Lift Toyota Hiace

Everything you need to lift your Toyota Hiace van is included in the Vanlife Northwest Hiace Lift Kit. Our specially designed coil springs are produced to deliver a 2 suspension lift without sacrificing ride comfort and handling. Models with 2WD and 4WD options are available.

Kit contains the following parts:

Options include:

PASSENGER DUTY SPRINGS: Our industry-standard lift spring designed for towing passengers both on and off the road. (Variants for 4WD & 2WD vehicles are available)

CAMPER DUTY SPRINGS: Our heavy-duty spring designed to support your camper’s build and a steady load of stuff.

On display on our camper vans, SPACE CABIN. (Only offered for versions with 4WD)

The accompanying shocks will eliminate the “hard/soft ride quality changing,” creating a balance between the two modes, if your van utilizes the TEMS suspension system.

The Toyota Hiace can you lift?

The High Lift offers a 100mm increase in suspension lift and is compatible with the whole Hiace, Commuter, and Granvia range. It is available for the new generation 300 series Hiace vehicles.

How is a Toyota Hiace jacked up?

The likelihood of jacking up on your own is dwindling since that problems caused by a flat tire are less likely. In the event of an emergency, it won’t help you if you forget the work processes. Additionally, you must handle it carefully since if you fix it incorrectly, you risk damaging the car’s body. Before beginning the work, it is crucial that you read the instruction handbook that came with the car and become familiar with the proper working technique.

The jack is first kept in the lid at the step’s left corner after the left-side sliding door has been opened. The fixed jack can be removed by twisting the hook region counterclockwise to reduce the height of the jack since it is fixed in a way that stretches the top and bottom of the storage section. And then remove the wheel stopper and jack handle set from the tool bag (including the handlebar, extension bar, and jack handle).

Keep in mind that there are really just four places where using a jack is safe. Prior to starting work, it’s critical to know exactly where you can hang up. Working on a flat, well-paved surface is something to bear in mind as a general rule. Beneath no circumstances should you jack up the car while going under the body. This is due to the significant chance that a jacked-up vehicle will collapse.

Put the parking brake on and then begin your task. Next, use two-wheel stoppers to secure the front and back tires that are diagonal to the location where you wish to jack up. Additionally, the rear of the set where the jack can be placed needs to meet with the rounded bumps on the back of the lower section of the left and right leaf springs with the jack’s recesses.

It is okay to position the jack there because there are guide ribs underneath the floor (frame component) of the body at the front, right behind the front wheels, that allow the circular part of the jack’s top to fit correctly. Consult an expert once before using anything other than the in-vehicle jack, such as other techniques or garage jacks. Jacking up in other places would put the body in danger of fracturing.

The in-car jack is stored in a lid that is visible when the sliding door on the left side is opened. In case of emergency, be careful not to panic.

Please make sure to check the instruction manual for the jack-up point. In order to apply the front side to the frame in this position.

Use the front side of the leaf spring in this manner when employing a lift in a repair shop. The rear side hump is acceptable.

The bulge at the end of the leaf spring should be the location of the rear jack-up point. Your car could sustain harm elsewhere.

How can I speed up my Toyota Hiace?

The components of the diesel engine in your HiAce must occasionally be upgraded. This is a wonderful approach to prepare your car for long distance driving. To increase performance rates, add cold air intake systems. By ensuring that the air entering the engine is colder than the air already inside, you are also accelerating the combustion rate of your engine. This adjustment can, at the very least, increase your engine’s performance rate by about 20%. In addition, you will notice a large decrease in the engine’s use of diesel fuel.

Describe Toyota HiAce.

The Japanese automaker Toyota produces a small commercial vehicle known as the HiAce (Japanese:, Hepburn: Toyota Haisu), which is pronounced “High Ace.” The HiAce was first introduced in October 1967 and has subsequently been offered with a variety of body types, including minivan/MPV, minibus, panel van, crew van, pickup truck, taxi, and ambulance. The HiAce is only available at Toyopet Store locations in Japan.

How are the front wheels jacked up?

Under the jack point that is placed close to the front tire, place a jack stand. Downshift the automobile. On the opposite side, repeat. Right now, you have both of the front wheels raised (on jack stands) and both of the rear wheels down.

Using Natural slopes

You don’t need a jack if there are raised ramps nearby, or even if the footpath curbs are in an urban area.

To gain the appropriate height to operate beneath the automobile, drive your vehicle at an angle to the ramp so that one of its wheels is raised.

You can either drive up the ramp in reverse at an angle to elevate the front wheels, or you can drive upward at an angle to elevate the back wheels.

View the complete video here:

Digging soil underneath

  • As normal, engage the emergency brakes, park your automobile, and chock the wheels.
  • You can create the appropriate elevation for changing a tire by digging a hole underneath the tire.
  • The earth may be dug readily for this purpose using a shovel.
  • Dig continuously until the axle is firmly supported by the obstructions.

This will enable you to get a suitable elevation for simple tire removal. Replace your tire after removing the lug nuts.

Using pieces of wood / bricks

Using pieces of raw, natural wood will allow you to lift your automobile high enough to gain access to the area underneath it without spending money on a jack.

These parts can be stacked to create a wooden block. When stacking the planks, stay away from nails.

The reason is that nails cause the hardwood planks to crack and leave a weak spot in the middle, which increases the likelihood that the entire block would collapse when the automobile is parked on it (you can use wooden glue which will have no effect on the strength of the wooden blocks).

You can now manually put the car onto the wooden block or drive it up to the chosen elevation to change a tire.

You may lift your automobile up similarly using bricks or any other flat piece of rock. Use a blocking or supporting item, such as bricks or a wooden board, using caution to prevent the tire from slipping off the platform you’ve built.

Important Safety Advice: After raising the automobile, use your emergency brakes or block the wheels to prevent them from rolling. It is suggested that you use both strategies. Applying the chock should be done on the side that is not being lifted. People have died after being crushed by their cars while working underneath them, thus we urge particular caution in following all safety rules.

How trustworthy is the Toyota Hiace?

Of course, it also includes maintenance expenses, import fees, and shipping prices. There is a considerable demand for old Hiace vehicles exported from Japan even if the price has increased significantly. These buyers prefer to purchase high-quality Toyota brand vehicles from Japan.

Why is Hiace so desired by people? Hiace’s dependability allows it to operate for up to 1 million kilometers, which explains why. Consequently, even if the mileage is 300,000 kilometers, it will be considered to “run 700,000 more miles!

the belief that “The overseas drivers of Hiace have reported that it can travel up to 1 million km. They continue until the transmission and engine stop functioning. Hiace gained credibility abroad since it could travel 1 million kilometers.

Furthermore, Hiace enjoys enormous popularity worldwide. Kenya, Uganda, and Tanzania are countries where Japanese automobiles predominate on the road. as shown in a picture of the well-known Uganda Airport Terminal. Instead, the majority of them are Hiace, which is common.

For the Hiace to be marketed outside of Japan, it is required that it was also “used in Japan.”

Japanese-made and “In Japan, it has been maintained and cared for! are the value of a brand!

It could be essential to switch the handle from right to left because of left-hand drive regulations in the exporting nation. If so, why don’t you start by placing an order for the left-handed Hiace from the United States? Thinking is more logical.

But it doesn’t function well. A Japanese person exists “involved car inspection system The harshest car inspection regime in the world is allegedly found in Japan. The Hiace used in other nations is not in the same condition as the Hiace that passed this rigorous car test.

Therefore, Hiace utilized in Japan are bought, even if the installation work for a handle is required. Similar to “Made in Japan,” “Used in Japan” denotes excellent quality.

Is there a timing belt or chain on a Toyota Hiace?

On a Toyota Hiace, a timing chain or belt ensures that the crankshaft and camshaft are in sync with one another and that the valves open and close at precisely the right times to coincide with cylinder combustion.

The same purpose is performed by a timing chain as it does by a timing belt, however the timing chain is constructed of metal and resembles a bicycle chain. The chain is enclosed inside the engine and requires lubrication due to its composition. A timing belt is normally made of rubber and fiber, is dry, and is placed outside behind a timing belt cover.

Timing chains often last longer than timing belts do. Belts ultimately deteriorate, split, and fall apart, whereas timing chains can stretch and occasionally snap, although this often occurs much later than a timing belt would have done.

However, timing chains have shown to outlast the belt and may turn out to be a more cost-effective solution in the long run. Vehicle makers did start replacing timing chains with timing belts to lower engine noise and costs because belts were a less expensive alternative.

If a timing chain is present in your Toyota Hiace, it may wear out or stretch over time and will need to be replaced in order to keep the engine operating.

You might experience power loss, engine backfiring, engine rattles, a rough idle, and unpleasant driving if a timing chain were to extend. As the timing drifts out of whack, the car will roughly operate. A timing chain rarely entirely breaks, but if it did, the engine would halt.

When it’s time to repair a timing chain, make sure to do it since it guarantees the engine stays running smoothly. Having the proper timing in an engine is crucial because it’s the only way they can run.

What kind of motor powers a Toyota HiAce?

The HiAce is available with two different wheelbase lengths, four-cylinder turbo-petrol and diesel engines, two, five, and twelve seat options.

Prices range from $39,740 for the LWB V6 manual to $71,240 for the Commuter GL Super LWB diesel auto before on-road expenses.

Although competitors like the Mercedes-Benz Vito and Ford Transit Custom have five-star ratings with slightly earlier date-stamps, the HiAce boasts the highest ANCAP rating with the most recent date-stamp in its sector.

The considerably older Hyundai iLoad was the next best-selling model in this market, but Toyota sold more than twice as many HiAce vans last year.

Pricing

  • $39,740 for a 2021 Toyota HiAce LWB V6 manual.
  • $41,740 for a 2021 Toyota HiAce LWB V6 auto
  • Toyota HiAce LWB diesel manual price in 2021: $43,240
  • 45,240 for a 2021 Toyota HiAce LWB diesel vehicle.
  • $48,240 for a 2021 Toyota HiAce LWB crew van with diesel.
  • $49740 for a 2021 Toyota Hiace Super LWB V6 vehicle
  • $53,240 2021 Toyota Hiace Super LWB diesel-powered vehicle
  • $68,240 for a 2021 Toyota HiAce Commuter Super LWB diesel vehicle.
  • $71,240 2021 Toyota HiAce Commuter GL Super LWB diesel

Engines

The diesel engine is a 2.8-liter turbo-diesel four-cylinder that generates 130kW of power and 420Nm of torque, while the petrol engine is a naturally aspirated 3.5-liter V6 that produces 207kW of power and 351Nm of torque.

All models have a six-speed manual or automatic transmission and are all rear-wheel drive.

Fuel Economy

V6 versions use 12.0L/100km with an automatic transmission and 12.4L/100km with a manual transmission on the combined cycle.

Diesel models have a 7.5L/100km manual fuel economy, an 8.2L/100km LWB auto fuel economy, and an 8.4L/100km crew van and Super LWB fuel economy.

For the Commuter versions, there is no available fuel economy statistic. There has a 70L gasoline tank on all variants.

Dimensions

In LWB form, the 2021 Toyota HiAce is 5265mm long, 1990mm tall, and 1950mm wide. In Super LWB form, it is 5915mm long, 2280mm tall, and 1950mm wide.

While the SLWB’s load bay is 3180mm long and 1615mm height with the same width as the LWB model, the LWB’s load bay measures 2530mm long, 1760mm wide (1268mm between the wheel arches), and 1340mm tall.

The maximum weight that may be towed while using brakes is 1500 kg for all other models, 1900 kg for the LWB turbo-diesel manual, and 1400 kg for the LWB V6 manual.

Servicing and Warranty

Toyota provides capped-price servicing for the first six visits or 60,000km in addition to a five-year, unlimited-mile warranty.

Servicing is necessary every six months or 10,000 miles, whichever comes first, and each service has a maximum of $245.

Safety

ANCAP awarded the Toyota HiAce a five-star rating based on tests taken in 2019.

It scored 94% for protecting adult occupants, 84% for protecting vulnerable road users, and 77% for safety assistance. Crew van models received an additional score of 88% for kid occupant protection.

Although the Commuter vehicles are still unrated, the five-star rating does apply to the standard and crew van variants.

The following safety features are included as standard on all 2021 Toyota HiAce models:

  • Automatic emergency braking with pedestrian and cyclist detection in daylight
  • Blind-spot observation
  • Warning for lane deviation
  • A lane-keeping aid
  • Alert for rear cross traffic
  • Auto-high beam
  • recognizing traffic signs
  • Rear and front parking sensors with reversing camera

Standard Equipment

Except for the crew van, which seats five people, and the Commuter, which accommodates 12, all HiAce models have two seats.

Except for the Commuter, which has a single sliding door, other models feature two sliding doors.

The following features are included as standard across all HiAce models:

  • 8.0-inch touchscreen infotainment system with Apple CarPlay and connected Android Auto
  • Bluetooth
  • cruising mode
  • Screen size for the instrument cluster: 4.2 inches
  • steering wheel embellished with leather
  • anterior USB port
  • full-size backup
  • sixteen-inch steel wheels