Find the battery in both cars, and attach the positive (red) cable to the positive terminal on both car batteries to jumpstart a Toyota Corolla. Take the black cable, and attach it to a metal surface on the non-functioning automobile and the negative terminal of the operating vehicle with clips. Make that the surface is unpainted. Additionally, be cautious to avoid accidently fusing the positive and negative cables. Start the working vehicle and let it run for three to five minutes while it is connected to the non-functioning vehicle. Try to kick-start the dead car. If it doesn’t work, make sure all the cables are connected correctly, give it a little time, and then try again. Still not working After a short period of time, try again, but after that, cease. You’ll need a mechanic if the automobile isn’t running by then because something else is wrong. After you’ve managed to start the broken car, let it run for a while. Next, remove each hook in the opposite direction.
In This Article...
Can a Toyota Corolla be jumpstarted?
The 12-volt battery may be discharged, in which case the hybrid system may be started using the following techniques. You can also contact a reputable roadside assistance service or your local Toyota dealer.
Restarting (jump starting) the Toyota Corolla hybrid system.
If you have a second vehicle with a 12-volt battery and a set of jumper (or booster) wires, you can jump start your car by doing the following.
- Verify that the electronic key is indeed being used. Depending on the circumstances, the alarm may sound and the doors may lock while connecting the jumper (or booster) cables.
- Detach the hood.
- Your vehicle’s (A) positive jumper cable clamp should be connected to the second vehicle’s (B) positive jumper cable clamp. Next, attach a clamp to one end of the negative cable and link it to (C) on the second vehicle, and then attach it to (D).
- Fire up the second car’s engine. To recharge your vehicle’s 12-volt battery, turn up the engine speed a little and keep it there for around five minutes.
- When the power switch is off, you can open and close any of your car’s doors.
- Maintain the second vehicle’s engine speed while turning the power switch to ON to turn on your car’s hybrid system.
- Ensure that the “READY” indicator is lit up. Contact your local Toyota dealer if the indicator does not illuminate.
- After the hybrid system has turned on, unplug the jumper cables in the exact opposite direction of how you connected them.
Have your Toyota Corolla Hybrid inspected at your local Toyota dealer as soon as the hybrid system starts.
Even when the car is not in use, the 12-volt battery will progressively lose its stored energy due to natural discharge and the draining impacts of some electrical gadgets. The 12-volt battery may deplete if the car is left for an extended period of time, making the hybrid system inoperable. (The hybrid system’s 12-volt battery recharges on its own while it is running.)
When recharging or replacing the 12-volt battery in your Toyota Corolla Hybrid
Your Toyota Corolla Hybrid may occasionally be unable to unlock the doors using the smart key system when the 12-volt battery is depleted. To lock or unlock the doors, use the mechanical key or the wireless remote control.
After the 12-volt battery has recharged, the hybrid system might not start on the first try, but it will start normally on the second try. There is no malfunction here.
The vehicle stores the power switch mode in memory. The system will go back to the state it was in before the 12-volt battery was depleted once it is reconnected to it. Be sure to turn off the power switch before removing the 12-volt battery. When reconnecting the 12-volt battery, take extra care if you’re not sure what mode the power switch was in just before the 12-volt battery depleted.
When removing the 12-volt battery terminals on your Toyota Corolla Hybrid
- Always start by removing the negative (-) terminal. When the positive (+) terminal is removed, a spark may happen if the positive (+) terminal comes into touch with any nearby metal. This spark could cause a fire in addition to electrical shocks, death, or serious damage.
How is a 2020 Toyota Corolla hybrid jump-started?
What happens when you need to jump start anything that also has a hybrid drive system? Jump starting a standard car can be difficult enough. Don’t panic; we’ve compiled a simple list of instructions to help you jump start a Toyota hybrid car, such the 2018 Toyota Camry. For a brief set of instructions, look below.
How do you Jump Start a hybrid vehicle made by Toyota?
Before beginning, you should first confirm that both cars are securely parked and switched off.
- Step 1: Open the hood and look under the fuse box cover for the Jump Start Terminal.
- The red positive jumper cable should be connected to the positive terminal in step two.
- Step 3: Join the other red positive jumper cable to the car receiving the jump’s positive battery terminal.
- Step 4: Attach the black negative cable clamp to the vehicle providing the jump’s negative battery connection.
- Step 5: Attach the second negative clamp to an obstruction-free, immovable, unpainted, solid metallic point.
From this point, all you have to do is start the jump-giving vehicle’s engine and let it run for around five minutes. The Toyota hybrid can then be turned on, and you can watch for the “Ready” indication to illuminate. The jumper cables can then be unplugged in the opposite direction from how they were attached.
Video Steps for Jump Starting a Hybrid Toyota
Those who learn best visually? Check out this Toyota video that shows you how to jump start a hybrid vehicle. In this video, we’ll be taking a look at the hybrid RAV4. As you can see, the 12-volt battery is actually found at the back of the car, but thanks to the unique jump start terminal under the hood, jump starting is still a similar process.
Can jumping another vehicle harm your own vehicle?
It is honorable to provide a helpful hand. You can consider letting someone use your car to jumpstart theirs if you observe them with a dead battery. You might be concerned that it might harm your car in the process, though. You want to help, but you don’t want to do anything to harm your car.
Giving someone else’s automobile a jump start will typically not cause any damage to your own. They would control your battery, but you could simply use your car to replenish it. If the jumpstart is effective, the donor automobile doesn’t actually sustain any significant harm. However, there is a good potential that your automobile will be destroyed if the jumpstart is not done correctly. Here’s how to go about doing that:
How is a Toyota Corolla battery charged?
Verify that the charger is off. Connect the charger’s positive cable to the battery’s positive terminal. Connect the charger’s negative cable to the battery’s negative terminal. Select the slowest charging setting for the charger.
How many times can a car battery be jumped?
According to Pep Boys, if a dead automobile won’t start, you can jump-start its battery with another vehicle once, but you shouldn’t try to crank it more than three or four times in a succession. If the dead automobile won’t start, it might require longer charging time. But if you’ve tried to charge it for a long time without success, it’s possible that the dead car’s battery is entirely dead and needs to be replaced.
In my experience, the aftermarket alarm that was installed on the car causes a parasitic draw that causes my car to need a jump start many times a week. In the summer, the battery typically holds a charge just fine for a week. But as soon as the temperature drops, I hear the dreaded “approximately every other day, click, click, click. It’s a good thing I have my trusty Shell portable jump starter to give my car the boost it needs to get going again. Even at single-digit temperatures, it functions.
But I can see how repeatedly jump-starting the battery may be bad for the battery, if not some other components of the car. As reported by Axle Addict, “Simply put, 12-volt batteries lack the strength to seriously harm electronic parts. Although this is a comfort, it is still safer to jumpstart the automobile as little as possible or only once.
With a dead battery, how do you start a hybrid vehicle?
- Avoid overusing your hybrid vehicle’s jumper cables on other vehicles as this can harm the electrical system.
- Turn off your headlights and inside lights, then engage your parking brake.
- Disconnect the hybrid system and take your key off.
- Fuse block cover, hood, and special jump-starting terminal cover should all be opened.
- The exclusive jump-starting terminal should receive the positive clamp (red) jumper cable.
- Connect the vehicle’s discharged battery’s negative clamp (black) to a stable, solid, unpainted metallic point.
- Make sure all unneeded lights are turned off and that the vehicles are not touching if the booster battery is put in another vehicle.
- When boosting a car, always utilize a battery that is the same or better in quality.
- Allow the jumper cables to be attached and the discharged battery to rest for five minutes. Then, with the gas pedal barely depressed, run the engine of the car that is boosting at roughly 2,000 RPM.
- Make sure the “ready light is on” before starting the hybrid system.
- After the negative cable, disconnect the positive cable.
Can you jump a hybrid vehicle?
The jump-start terminal of a 2010 Toyota Prius is visible in this picture. If you’re facing the front of the Prius, the terminal is on the right side of the vehicle and has a black cover that closes over it. Author: Allison Loudermilk
While dealing with a dead battery in a hybrid automobile is more difficult than dealing with one in a standard gasoline vehicle, the situation is probably not as severe as you might think. Why? The truth is that not all hybrid systems are made equal.
- Since the hybrid auto industry’s powertrains are not standardized, there is a lot of difference across brands and even within the same brand for model year redesigns.
- Many hybrid vehicles feature many batteries, some of which may not be in the typical places.
- If the battery dies, certain hybrid vehicles do require a trip to the dealer.
- Some modern hybrid vehicles have self-starting capabilities.
Any car you attempt to jump start is risky if you don’t know what you’re doing. Hybrids increase the procedure’s level of anxiety. Hybrid cars can typically be jump-started just like a regular automobile with a standard gas engine. It is true that not all conventional gasoline vehicles have the same powertrains, but learning how to jump-start a gas vehicle is simple because of this. However, the unique design of many hybrids’ powertrains can initially be perplexing.
The majority of hybrid models have two different batteries: a larger 12-volt battery used primarily for starting the car, which can be found under the hood but is frequently found in the trunk. This battery is smaller than the main high-voltage battery in the powertrain and is used when the car isn’t using its gasoline engine or runs in tandem with the gas engine for greater efficiency. Some people may feel it’s dangerous or difficult to jump-start a hybrid because of the existence of its high-voltage battery pack, but those batteries should be simple to distinguish from the smaller, more common 12-volt battery used to start the automobile (and thus, jump-starting). To avoid electric shocks from unintended contact, a hybrid battery pack should be enclosed and labeled with warnings. Make sure the battery you’re using is the right one with additional caution, and everything should go well.
Both of those batteries have the potential to run out of power, so if you’re experiencing battery issues, you’ll need to identify which battery is to blame. You’ll need a mechanic to look at the primary hybrid battery if your car won’t start and jump-starting doesn’t help.
The jump-start terminal found under the hood of many Toyota hybrid vehicles, including the Prius, should be used in place of the 12-volt battery. The procedures for jump-starting the hybrid are essentially the same as for jump-starting any other vehicle after you have found this terminal. (If you have a Toyota hybrid and are now stranded on the side of the road, this video about jumping a Toyota hybrid may be very helpful.)
Verify that you aren’t actually out of gas before presuming you need a jump start. According to Popular Mechanics, some hybrid vehicles, including the defunct Chevrolet Silverado and Nissan Altima models, shut off when the petrol tank is empty even when the battery is completely charged. Others, like those made by Toyota and Lexus, can only operate for a limited time (a few miles, tops), provided the primary battery is fully charged.
By the way, the smaller 12-volt battery is what you’ll need to utilize if you need to jumpstart another vehicle using a hybrid vehicle. The battery of a hybrid vehicle is typically found in the trunk as opposed to under the hood, and the terminals should be marked with plus (+) and negative (-) posts like the battery of a conventional vehicle. An example of this is the Toyota Prius. Check your owner’s manual if you can’t locate the battery in the trunk or if there aren’t any indicated terminals for jump-starting.
We’ve been cautious to say that “most” conventional cars have a 12-volt battery that serves as the starting mechanism up to this point. That’s because, according to Automobile & Driver, up until 2017, every modern car had a battery like that. The first contemporary mass-produced vehicle to defy the trend was the Hyundai Ioniq, which was then followed by the mechanically similar Kia Niro. Hyundai chose to use a lithium-ion battery in place of the 12-volt battery, and it is situated next to the primary hybrid battery. A switch inside the vehicle marked “12V Batt Reset” draws enough electricity from the main hybrid battery to jump start the starter battery in the event that the starter battery dies. In other words, while the Ioniq and Niro can jump-start themselves, they cannot be used to jump-start another vehicle or be classically jump-started. In addition to being more practical, the lithium-ion starter battery is 26 pounds (nearly 12 kilograms) lighter than a typical 12-volt starter battery, which improves the efficiency of these cars.
Your best bet if you drive a hybrid vehicle is to become familiar with the jump-starting options and techniques for your particular model before you need them. The owner’s manual for your vehicle is a reliable resource for this kind of knowledge. You can get in touch with the customer support team at the manufacturer or the service division at your dealership. Call a roadside assistance service if you are in an emergency situation and are unsure of what to do (AAA is 1-800-HELP). That will protect you from harm and assist prevent irreparable harm to the intricate powertrain of your hybrid vehicle.
The majority of new or certified used automobiles come with a roadside assistance contract, so keep that in mind if you find yourself in need of a jump but are unsure how to proceed. If you purchased an extended warranty for your car, you might also be protected. Last but not least, you can also add roadside assistance to your auto insurance.