It’s more difficult to install fog lights on a car that doesn’t already have them than to replace broken ones. The wiring will need to be added by you, and you might need to drill a hole for the lights. Fortunately, most cars today come equipped with fog lights.
Wires for the on/off switch must first be run into the vehicle. The wires will travel through the hood and into the car’s cabin. You can already run these wires via a hole in the majority of vehicles. You might have to drill a small hole yourself if there is no available space.
In This Article...
Can aftermarket fog lights be installed?
You might be able to see in bad weather for the first time if you swap out your standard fog lights for aftermarket ones. However, you are not restricted to mounting them as fog lights. For greater illumination and a more intimidating appearance, you can put these lights in other locations on your car. Choosing the proper brightness and appearance are key to finding the right lights. Look at the aftermarket fog lights for your car below.
H16 bulb: what is it?
The H9/H11 bulb family includes the H16 automotive light bulb, which is very similar to the H8, H9, H11, and H15 bulbs. It is distinguished by having three metal tabs evenly placed around the base to lock it in place, a standard right-angled style connection input base, and a sizable rubber o-ring beneath the metal tabs.
The wattage levels that they operate at and whether or not they have a painted-on reflector cover at the top of the glass tube make up the largest differences between H8, H9, H11, and H16. The H11 is more frequently used in headlights than the H16 is in fog lights. As a result, you’ll encounter H11 bulbs that resemble H16 bulbs almost exactly but with greater wattages and somewhat different pin configurations. However, with a little finagling, you could change an H16 and H11 around if you really wanted to.
Where does the confusion between H16 and 5202 bulbs originate? First off, there weren’t many vehicles in America that used an H16 bulb until quite recently. Then, there was probably some confusion after an uninformed light bulb maker in Asia decided one day that they didn’t know what a true H16 bulb was. They began classified 5202 light bulbs as H16, 5202, 9009, etc. as a result of a series of events. This is incorrect! You will never come across an H16 OEM bulb that resembles a 5202 from Sylvania, Philips, or another manufacturer. Here are a few well-liked LED variations of these many bulbs:
How much does adding fog lights cost?
A vehicle’s auxiliary lighting system includes fog lights, which are often mounted below the main headlights. Fog lights are useful during times of heavy fog or precipitation, while the primary headlights assist you in seeing the road in normal circumstances.
and talk about things like location and professional fees that affect installation costs. In addition, we’ll give you a bonus suggestion for saving money when buying a fog light. Now let’s get into the specifics.
Based on their experiences, several car owners discussed fog light installation costs on numerous internet forums. They said that, taking into account the typical cost of installing a fog light, one would wind up shelling out between $180 and $255.
How Much Is a Fog Light Bulb?
You may get a fog lamp for about $15 and $35, according to numerous eCommerce websites and neighborhood stores. The supplier, brand, body type, intensity, and product fit may all affect the price, though.
How Much Is Fog Light Installation?
Typically, the installation fee ranges from $40 to $60 if you have a mechanic change your fog light bulb at an auto repair shop. According to Element Owners Club, the price of a fog light with installation by the dealer might run you anywhere from $149 to $500.
If you decide to replace the fog lights rather than purchase a new set, the cost may be as low as $100 to $150.
Why do installation fees for fog lights vary so widely? Examine the elements listed below that have an impact on installation costs.
How is an aftermarket fog light kit installed?
This standard installation manual explains how to mount our fog lights. We’ll be utilizing the Scion FR-S as a guide for this tutorial. We advise consulting the installation manual for your fog light, either in your package or online at our LED fog lighting guide website.
Step 1: Carefully pull away the stock bezel from the top down using a plastic pry tool.
Second step: Make the installation location accessible under the wheel well liner. To give yourself room to release the clamps and draw out the wheel well cover, turn your wheel. Connect your fog lamp unit to the wiring harness from the relay and switch kit.
Step 3: Secure the tabs on the right side of your fog lights to your bumper. If your LED fog light already has a bezel, you can skip this step.
Step 4 is to reinstall the bezel. On the other side, repeat the past five steps.
Step 5 is to attach the wires to a relay and switch wiring kit. To do this, follow the instructions in our installation guide for relays and switches. You can also use the illustration below:
Step 6: To complete, replace the clamps holding the wheel well liner to the well after testing all of your lights. Enjoy your brand-new fog lamps at this point.
Helpful at night, are fog lights?
In the event that you use one of our links to make a purchase, The Drive and its affiliates might receive a commission. Keep reading.
It’s not uncommon to be traveling down the road with a clear view only to become trapped in a dense, rolling fog a few minutes later. Since few drivers have any experience driving in it, fog presents a significant challenge for many drivers. Always a problem is visibility, especially at night or in poor light.
For this reason, in addition to the standard headlights, the majority of cars also have some sort of fog light system. Fog lights, which are designed to more effectively cut through fog than headlights, can actually save lives when traveling in hazardous situations.
But in order to be safe when visibility is low, it’s crucial to understand how to utilize fog lights properly. So, in order to drive safely in foggy circumstances, here are eight things you should know about fog lights.
Describe HID vs. LED.
Cars with LED and HID headlights have equipment and bulbs that make it easier for drivers to see at night. Up until recently, the majority of automakers used halogen lights in their vehicles, which heat a filament using argon and nitrogen gases to produce light.
High-intensity discharge headlights, often known as HID headlights, use a mixture of metals and gases to produce a brilliant blue-white light when the filament is heated. Some HID lights charge xenon through electrodes with high voltage rather than using a filament. HID headlights are high-end headlights that are popular because of their brilliance and durability. Driving at night is made much safer with this type of headlight.
Light-emitting diode headlights are what they sound like. They transport the energy-emitting photons that produce light using semiconductors. Some of these headlights need additional fans or heat sinks to regulate the temperature because they can get very hot.
The following are some of the main traits and variations between each:
- LED lights have a brightness range of 9,00010,000 lumens, however HID lights may only have 8,000 lumens. However, both are more vibrant than conventional halogen lights.
- Technology: HID lights require gas, while LED lights use electricity (typically xenon).
- Energy consumption: Both consume more energy than halogen, but LEDs are marginally more energy-efficient.
- Lifespan: HID lights have a life expectancy of about 15,000 hours, whereas LED lights may last up to 45,000 hours.
- LED lights frequently have bulbs with locking tabs, heat sinks, and diodes. HID headlights may include electrodes, electrode chambers, outer bulbs, and locking tabs.
- Price: Though costs might vary by type, HID headlights are frequently less expensive than LED headlights.
- LED lights turn on immediately, whereas HID bulbs’ heating filaments may take a moment to ignite.
- Color: A variety of hues can be produced by both LED and HID lights.
- Both HID and LED lights have a decent range, typically up to 300 meters (about 985 feet).
Can Sylvania LED fog lights be used as headlights?
You may update your vehicle’s lights with the clarity and performance that LED lighting technology delivers thanks to SYLVANIA LED Fog and Powersport LED bulbs! SYLVANIA LEDs cut through foggy conditions on the road ahead and are approved for on-road use as a replacement for fog lights in your car or truck. The LED headlight bulbs are available as an off-road upgrade for your powersport headlights, providing improved clarity and contrast to see what obstacles lay on difficult terrain and trails. The SYLVANIA LED Fog and Powersports bulbs are designed to deliver an exceptional 6000K white light, as well as style and durability, and they are sure to draw attention. High performance materials were used in the manufacture of these direct LED replacement bulbs to guarantee their performance and endurance.
Which fog light manufacturer is best?
The Top 14 Car or Truck Fog Lights
- Kit for Blazer Baja Lights.
- LED off-road lights from Anzo with Rugged Vision.
- Yellow Lens Fog Lights Kit from Pentair.
- Fog Light Kit for Warn.
- Kit for a Hella Micro FF fog light.
- Blue halo rings around universal projector-style fog lights.
- Blazer Round Projector Fog Lights in Ultra White.
- Ion 540 Series Fog Lights by PIAA.
Can I connect my headlights and fog lights?
For a number of reasons, I wouldn’t connect the foglights to the headlight circuit:
1) Too much current could break a fuse.
2) If the original fuse is changed to prevent it from blowing when both the highlights and the fog lights are on, the additional current pull could melt or burn the headlight wire harness.
3) A diagnostic issue code may be generated by an onboard “Big Brother” if the headlight circuits are drawing too much current.
The switch on the dash switches on the OEM foglights. The switch is connected to the front control module (FCM), which in turn controls a relay, which supplies power to the OEM foglights. The 20 amp fuse (fuse #7) is for the pair of foglights.
A #14 or #12 AWG stranded wire should be run through an in-line fuse (20A) to one contact of the relay and continued along the same size wire to the foglights as a minimum. This wire should also be connected to an independent power source in the IPM (front fuse/relay box; fuse #7 position should be available). One side of the relay’s coil should be connected to a low beam headlight wire (WT/OR on the left or OR/WT on the right) for control, and the other side should be grounded. The control circuit can be wired with #18 or #22 AWG stranded wire as the relay’s coil uses little current.
What are the available brightest fog lights?
The pair of bulbs in the VoRock8 8000 Lumens LED Fog Light Bulb will definitely make an impression. These LED fog lights are among the most potent ones on our list. The VoRock8 fog lights are the brightest because they have 8000 lumens of output. They are also sold in pairs and fit almost every car you can imagine, however you should always confirm that any fog light you want to buy is compatible with your vehicle before making a purchase.
They are made of cold-pressed aircraft grade aluminum, and a two-ball fan is integrated into the design to control heat dissipation. They have a 6500K diamond white color and are also 12-volt bulbs.
However, there have been problems with the cooling fan that have caused the lights to briefly go out. As their polarity might need to be changed to ensure optimal operation, you should also read the instructions.