How To Get Rid Of Maintenance Required Light Toyota Camry

Push and hold the odometer button on your dashboard briefly, then quickly turn your key to the second position. Hold the odometer button down for a further 10 seconds. The maintenance light should flash and you could hear a beeping if everything is done correctly. Your Toyota Camry’s maintenance light ought to go out after doing that.

How can I turn off the Toyota Camry’s maintenance is required light?

Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.

How can I turn off the Toyota maintenance necessary light?

How to Turn Off the Toyota Service Light

  • As soon as you are ready to start your car, insert your key into the ignition and turn it to the first position.
  • Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard.
  • Hold the odometer button down for a total of 10 seconds.

How do I reset the needed maintenance?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

Why does the maintenance required message on my Toyota Camry?

  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • If the car is on, turn it off.
  • Press and hold the ODO reset / readout button while the engine is off.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • The ODO display will briefly flash before beginning to display only zeros.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • Now the light will read “MAINT REQD.”

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

Why, after an oil change, is my maintenance required light still on?

If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.

Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.

The maintenance required light’s seriousness?

Every 5,000 miles, this light automatically comes on as a reminder for you to replace the oil in your automobile. You can still use your automobile safely while the light is on in your dashboard because the light itself does not indicate that your car has been damaged.

Is the check engine light the same as the maintenance necessary light?

Even the smallest elements, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.

What does the maintenance required light mean?

Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.