We’ve all accidentally locked our keys inside of our vehicles, and thanks to the automated locking mechanism, they will stay there until you use a spare set of keys to unlock the vehicle or hire a locksmith. Fortunately, there is a quick and simple method for opening the Toyota Camry’s trunk from the outside if you accidentally locked your keys inside.
You’ll need a long screwdriver for this technique, but since it’s very possible that your basic tools are locked in the trunk, either ask another driver to lend you one for a short while, or try your luck with a piece of straight wood or a branch.
Find a rubber plug the size of a huge bottlecap under the driver’s door. Next to the driver’s seat, exactly below the trunk latch, is where you’ll find it. Use the instrument you have at your disposal to press upward through the hole after removing the plug. It will push on the trunk lock and force the carpets up, opening the trunk so you can get your keys out. Don’t forget to re-plug the device when you’re finished!
In This Article...
Without a key, how do you open a trunk from the outside?
Oops! Fortunately, as long as that isn’t locked, too, you can use the trunk release button or lever inside your car to open the trunk without a key.
The best approach to open the trunk if you’ve completely locked yourself out of the car is still through the cabin. To open your automobile door, you have two options: call a locksmith or use a slim jim.
Most auto parts stores sell slim jims, often known as lock picks. To utilize it to retrieve your keys from the trunk, follow these steps:
- Between the window and the window trim, press the pick down.
- With the pick, search the area for a rod.
- The automobile door should then open after using the pick to raise the rod.
- Now look inside your car for the lever or button that releases the trunk.
- To unlock the trunk, push or pull the lock.
Therefore, you have a few options if you’ve locked your keys in the trunk. If you’re locked out of the trunk as well, you can either use a slim jim by following the methods above, call roadside help, or open the trunk using the trunk release button or lever in the cabin.
If you have a history of bad luck, Jerry’s roadside assistance membership can help you avoid the hassle of auto accidents. For just $6.99 a month, Jerry joins with Urgently to offer you the best roadside assistance available, including features like towing, lockout service, and a mechanics hotline.
Without a key, how do you open the boot of a Toyota Camry?
If you try this procedure on your own, there’s a risk you won’t be able to put everything back in its proper place, so be sure to follow the instructions and watch the instructional video first. When your Camry’s doors can be unlocked but the alarm system prohibits you from opening the trunk and your keys are inside, it still functions.
- On the driver’s door, find the plastic plug. When the door is closed, it is level with the handle and faces the B-Column. Remove it, then store it securely.
- Peer through the gap.
- Inside is a Torx head screw. Locate the right size Torx screwdriver, then remove the screw. Although there are safeguards in place to stop the screw from hitting the door, proceed with caution just in case.
- To get to the key cylinder, pull the door handle. The key cylinder must be removed from the socket, however doing so can be challenging due to how tightly it fits. Avoid breaking off the handle or scratching the paint. As a temporary layer of security, some masking tape will be fantastic.
- The cylinder head will emerge facing the car’s rear. Once you’ve opened the trunk, you won’t be able to put it back in any other way, so keep this in mind.
- Take a look at the key cylinder’s tip. The plus-shaped lock mechanism will be visible. When you look inside the cylinder slot, you will see a plus-shaped indentation where the cylinder should fit.
- Carefully place a flathead screwdriver into the cylinder slot. Rotate it to lock the car and then to unlock it once it is positioned inside the plus-shaped indentation.
- When you push the trunk release button, the trunk instantly opens!
It is far more difficult to put the cylinder lock back in place than it was to remove it. Let’s follow the procedures to put the door back in working order.
- Slide the cylinder back in from the same angle it was inserted by raising the door handle. Take your time, be gentle, and avoid using forcethis will involve plenty of twisting, pivoting, and turning.
- Insert the key, turn it, then gradually apply pressure to the cylinder until it is facing the proper direction and the door handle can slide onto it. The cylinder should then automatically fall into position.
- Tighten the Torx screw while the key is still within the lock. If the screw isn’t holding, you’ll use the key to wriggle it into place until it does, causing everything to settle into its proper position.
- After replacing the plastic stopper, the procedure is complete.
How do the back seats of a Toyota Camry fold down?
Even though moving can be a very exciting event, it can also be stressful, especially if you find yourself short on space. Follow these easy steps to fold down the backseat on a Toyota Camry:
- Locate the release knobs beneath your rear window after opening your trunk.
- To maximize space, pull the knobs, then move the seats downward and forward.
- Simply lift them back into position until they lock to set them back up.
You should have a lot more room for boxes now that you’ve successfully folded down your backseats! Once you’ve moved in, you’ll need to update your auto insurance with your new location and confirm that your coverage satisfies the minimal standards imposed by your state.
Why not spend a little more time making sure you aren’t paying too much for your auto insurance while you’re at it? In less than a minute, the Jerry app will produce comparative quotations from leading suppliers. Jerry collects your data from your former insurance, so you won’t have to fill out any time-consuming forms or make any unnecessary phone calls. In essence, you have full coverage and discounts without any hassles.
How is the hood of a Toyota Camry opened outside?
It’s fantastic that you’re learning about car maintenanceundoubtedly it’s a cost-effective strategy! The 2018 Toyota Camry’s hood can be opened as follows:
- Pull the release lever first. On the left side of the steering wheel, close to the floor, is where you’ll find this lever.
- Then, make your way to the front center of your vehicle and insert your hand into the space between the hood and the frame.
- Push the hood upward after pulling the lever to release it. When opened, the hood ought to remain so until you press down on the top to close it once more.
Check out the Jerry app if you want to save money on other auto expenses while you’re at it. Jerry is a qualified insurance broker that can assist you in locating the lowest rates for the coverage you require. To get affordable rates, simply download the app and respond to a few short questions.
Without a key, how do you unlock a 2007 Toyota Camry?
response given by
- The first step is to jam a flathead screwdriver, another small object, or something similar into the gap on the front driver’s side between the door and the frame.
- Pry the door open a bit with the screwdriver.
- Fill the gap you’ve made with a wire coathanger (or another long, rigid wire).