- Make sure your mobile device has Bluetooth turned on.
- Select Bluetooth from the Setup menu on your Entune entertainment system by clicking Menu > Bluetooth.
- Choose your Toyota Entune system from the Bluetooth menu on your smartphone.
- The Toyota Entune system and your mobile device are now Bluetooth-enabled.
In This Article...
How do I make a phone call from my Rav4 2022?
Select “Bluetooth” and then “Add New Device” from the screen of the automobile. Look for a pin number and choose the proper device name. Verify that the pin you enter matches the one on your phone. If it does, choose “Pair on the screen of the car.
How do I use Bluetooth to link my iPhone to my Rav 4?
How to Install Bluetooth in a Toyota
- Open the Menu menu on your Entune multimedia system, choose Setup, and then select Bluetooth.
- Choose your Toyota Entune system from the Bluetooth menu on your mobile device.
How come my phone and Toyota won’t connect?
The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.
How can I connect my phone to my car?
from your phone, pair
- Verify that your car is paired and ready for discovery.
- Open the Settings app on your phone.
- Then select Connected devices. Tap “Bluetooth” if you see it.
- To pair a new device, tap. Name of your vehicle.
Soft Reset
The Toyota Entune multimedia system can be quickly and easily reset using the following technique:
- Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
- Hold off till the multimedia screen turns on.
- For 12 seconds, firmly press and hold the PWR-VOL knob.
- Toyota Entune ought should restart and work normally.
Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:
- While the engine is off, turn on the electrical systems.
- Hold off till the Entune system turns on.
- Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
- Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.
Hard Reset
If the prior approach didn’t work, you must carry out the following actions:
- Do not start the engine; instead, press the Engine button twice.
- The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
- The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
- Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.
The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.
Software Reset
Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.
- Without starting the engine, start the vehicle.
- Remove Entune from any Bluetooth devices that are currently in use.
- Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
- Select the Setup menu on the display after the restart is finished.
- Choose General from the menu.
- Locate and click the Delete Personal Data button.
- Check that everything is working properly by starting the car.
How can I set up CarPlay on a Rav4?
Use a Lightning connector to connect your iPhone to the Toyota USB port. On the Toyota EntuneTM 3.0 touchscreen, select “Apple CarPlay.” To access Apple CarPlay, select Menu > General. Apple CarPlay ought to be connected as soon as your phone is plugged in with a USB cord.
In my Toyota, how can I set up Bluetooth?
It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.
Android Directions
Using Android:
- Choose “Settings”
- Activate Bluetooth.
- Activate “Scan for devices.”
- Input “SETUP”
- Choose “Bluetooth”
- Choose “Add New Device”
- To make this system discoverable, click.
Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!
iPhone Directions
Using an iPhone
On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.
EntuneTM App Suite and Hands-Free Bluetooth
You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.
Need to Order Some Stuff for Your Toyota?
Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.
Is wireless CarPlay available in the 2022 Toyota Rav4?
A 7-inch touchscreen, a 6-speaker audio system, Bluetooth, voice recognition, satellite radio compatibility, Apple CarPlay, and Android Auto are all included in the infotainment system.
How can I pair my 2014 Toyota RAV4 with my Bluetooth device?
- Make sure your phone’s Bluetooth is turned on.
- the Scan For Devices option
- Push the Setup button on the screen in your car.
- Select Bluetooth next.
- the Add New Device button
- Choose Make this System Findable.
- When your phone sends you a pairing request, accept it.
- The pairing of your device and vehicle will be verified by a confirmation.
Always launch the app on your phone first before using the system, and make sure your phone is plugged into the Entune App Suite. To accomplish this, select Setup from the menu, then Bluetooth, Paired Device List, your phone, then Connect. You should be aware that utilizing Entune requires using the internet, thus data charges may be necessary.
Be at ease! Come by and say hello! We are pleased to assist you in syncing your phone with your Toyota car. In Martinsburg, West Virginia, at 650 Foxcroft Avenue, we are easily accessible.
How can I link my 2008 Rav 4 to my phone?
Steps for Connecting a Cell Phone to a Toyota RAV4
- To activate voice instructions, use the “Voice Command” button on the steering wheel.
- Say “setup,” “phone setup,” “pair phone,” and then “setup.” The “Voice Command” button might need to be pressed in between each command.
- Give your phone a name out loud.
How do I connect my iPhone to my vehicle?
CarPlay, a smarter and safer way to use your iPhone in your car, is a feature that is available in some vehicles. When you use CarPlay, the functions of your iPhone that you want to use while driving are shown right on the dashboard of your vehicle.
To begin with, confirm that your country or area and your car both support CarPlay.
Connect your iPhone to the USB port on your car’s audio if it supports CarPlay utilizing the USB port. A smartphone symbol or a CarPlay icon may be used to identify the USB port.
Press and hold the voice command button on your steering wheel to set up CarPlay if your vehicle supports wireless CarPlay. Alternatively, check sure your car is in Bluetooth or wireless pairing mode. Next, select your vehicle on your iPhone by going to Settings > General > CarPlay > Available Cars. For more details, consult the owner’s manual that came with your vehicle.