How To Connect To Toyota Corolla Bluetooth

  • Make sure your mobile device has Bluetooth turned on.
  • Select Bluetooth from the Setup menu on your Entune entertainment system by clicking Menu > Bluetooth.
  • Choose your Toyota Entune system from the Bluetooth menu on your smartphone.
  • The Toyota Entune system and your mobile device are now Bluetooth-enabled.

How can I link my 2020 Toyota Corolla’s Bluetooth?

It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.

Android Directions

Using Android:

  • Choose “Settings”
  • Activate Bluetooth.
  • Activate “Scan for devices.”
  • Input “SETUP”
  • Choose “Bluetooth”
  • Choose “Add New Device”
  • To make this system discoverable, click.

Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!

iPhone Directions

Using an iPhone

On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.

EntuneTM App Suite and Hands-Free Bluetooth

You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.

Need to Order Some Stuff for Your Toyota?

Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.

How can I pair my Toyota Bluetooth device?

  • Make sure your phone’s Bluetooth is turned on.
  • the Scan For Devices option
  • Push the Setup button on the screen in your car.
  • Select Bluetooth next.
  • the Add New Device button
  • Choose Make this System Findable.
  • When your phone sends you a pairing request, accept it.
  • The pairing of your device and vehicle will be verified by a confirmation.

Always launch the app on your phone first before using the system, and make sure your phone is plugged into the Entune App Suite. To accomplish this, select Setup from the menu, then Bluetooth, Paired Device List, your phone, then Connect. You should be aware that utilizing Entune requires using the internet, thus data charges may be necessary.

Be at ease! Come by and say hello! We are pleased to assist you in syncing your phone with your Toyota car. In Martinsburg, West Virginia, at 650 Foxcroft Avenue, we are easily accessible.

Can’t get Bluetooth to work with a Toyota?

Here are the steps for each: The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.

What is the Bluetooth setup process for a 2017 Corolla?

It may seem challenging to stay up with the most recent technological developments because technology is constantly becoming more intuitive and integrated. Vehicle technology is a fantastic (though confusing) thing, whether you are connecting your phone to Apple CarPlay or Android Auto, installing a Qi Wireless charging station in your center console, or setting up your SiriusXM Radio to just play your favorite stations. Check out our easy instructions to wirelessly connect your iPhone 7 to the Bluetooth in your 2017 Toyota Corolla for hands-free streaming and voice activation.

Steps to Sync iPhone 7 to Corolla’s Bluetooth

The Entune Display in the Corolla shows:

  • Select “Home” on your keyboard.
  • In the display’s upper right corner, click the “Setup symbol.
  • Choose “Add”

Utilizing an iPhone 7 or 7 Plus:

  • Verify Bluetooth is turned on. By hitting the “Home button, scrolling upward, and then selecting the Bluetooth icon, you can also activate Bluetooth.
  • From the list, choose your device.
  • Enter the PIN or verify the passkey that is displayed on the car’s display.
  • If necessary, choose “OK or “Pair.

Enable Messaging System

Follow these steps to advance your Bluetooth pairing and make your iPhone’s messages visible on your Entune display (if applicable to your multimedia system):

  • Choose the “Information icon next to the Connected system on the right
  • Switch on “Display Alerts
  • Your iPhone will be linked and paired, and a confirmation will show that.

I want to connect my iPhone to my Toyota, but how?

How to Bluetooth Connect an iPhone to a Toyota

  • Make sure Bluetooth is turned on in your iPhone.
  • Go to Apps after turning on your Toyota EntuneTM system.
  • Your touchscreen’s Setup option should be clicked.
  • Select Bluetooth, then click Add New Device.
  • Click Add after locating your iPhone on the EntuneTM screen.

Soft Reset

The Toyota Entune multimedia system can be quickly and easily reset using the following technique:

  • Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
  • Hold off till the multimedia screen turns on.
  • For 12 seconds, firmly press and hold the PWR-VOL knob.
  • Toyota Entune ought should restart and work normally.

Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:

  • While the engine is off, turn on the electrical systems.
  • Hold off till the Entune system turns on.
  • Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
  • Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.

Hard Reset

If the prior approach didn’t work, you must carry out the following actions:

  • Do not start the engine; instead, press the Engine button twice.
  • The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
  • The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
  • Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.

The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.

Software Reset

Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.

  • Without starting the engine, start the vehicle.
  • Remove Entune from any Bluetooth devices that are currently in use.
  • Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
  • Select the Setup menu on the display after the restart is finished.
  • Choose General from the menu.
  • Locate and click the Delete Personal Data button.
  • Check that everything is working properly by starting the car.

How can I pair my automobile with my Bluetooth-enabled phone?

from your phone, pair

  • Verify that your car is paired and ready for discovery.
  • Open the Settings app on your phone.
  • Then select Connected devices. Tap “Bluetooth” if you see it.
  • To pair a new device, tap. Name of your vehicle.

Why won’t my Bluetooth connect to my car?

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

How can I restart my car’s Bluetooth?

Technology is fantastic, but nothing is more aggravating than when it breaks down. Even the most patient person can become irritated by malfunctioning technology, which can be as simple as a slow website load time or a dead battery. Inside the car, in particular, this is true. The last thing you want is for your car’s Bluetooth to malfunction while you’re driving. Since nothing is flawless, sometimes it’s necessary to reboot technology. The Bluetooth in your car is the same. It could be time to reset your Bluetooth if calls are being dropped or if you’re having difficulties connecting your smartphone.

The best approach to accomplish this is to turn off Bluetooth on both your smartphone and your car. Remove your smartphone from the infotainment system in your car, along with any history of connected devices. After that, turn off the car and restart your phone while still in it. Restart both, turn on Bluetooth on both, then attempt connecting once more.

Ways to solve car Bluetooth issues

How went it? Do you still experience connectivity problems? Here are a few things to look for:

  • Is the USB or AUX cable functioning properly? Examine it for tears and make sure it’s working properly by testing it out in another car.
  • Remove any things, including pencils, coins, and other small items, from the infotainment display (any items in the trays or cup holders.) These objects occasionally can obstruct Bluetooth’s radio signals.
  • A full charge should be present on your smartphone. Low battery life will make it difficult for a phone to sustain a Bluetooth connection.
  • How many of the car’s devices can connect via Bluetooth? Only the device you’re trying to connect to your car should have Bluetooth enabled, at least initially. If not, the system might be attempting a connection with the incorrect device.
  • Does your smartphone work with the entertainment system in your car? Visit the website of your OEM to double-check.

How can I resolve a Bluetooth pairing issue?

Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.

How can I connect my 2020 Toyota Corolla to my Android phone?

How to Bluetooth Pair Your Phone

  • Start your automobile and turn on your phone.
  • The phone button will appear on your Toyota’s in-dash screen.
  • Make sure Bluetooth is turned on by going to Settings, Bluetooth, from your phone.
  • Select the “Apps” button on your Toyota’s in-dash display.