How To Connect Bluetooth To Toyota Tundra

Toyota / By
  • Make sure your mobile device has Bluetooth turned on.
  • Select Bluetooth from the Setup menu on your Entune entertainment system by clicking Menu > Bluetooth.
  • Choose your Toyota Entune system from the Bluetooth menu on your smartphone.
  • The Toyota Entune system and your mobile device are now Bluetooth-enabled.

How do I use Bluetooth to link my iPhone to my Tundra?

  • Make sure your phone’s Bluetooth is turned on.
  • the Scan For Devices option
  • Push the Setup button on the screen in your car.
  • Select Bluetooth next.
  • the Add New Device button
  • Choose Make this System Findable.
  • When your phone sends you a pairing request, accept it.
  • The pairing of your device and vehicle will be verified by a confirmation.

Always launch the app on your phone first before using the system, and make sure your phone is plugged into the Entune App Suite. To accomplish this, select Setup from the menu, then Bluetooth, Paired Device List, your phone, then Connect. You should be aware that utilizing Entune requires using the internet, thus data charges may be necessary.

Be at ease! Come by and say hello! We are pleased to assist you in syncing your phone with your Toyota car. In Martinsburg, West Virginia, at 650 Foxcroft Avenue, we are easily accessible.

How can I link my 2017 Toyota Tundra’s Bluetooth?

With Bluetooth Handsfree Technology, the 2017 Toyota Tundra makes it easy to stay in touch with your phone. For simple music streaming, phonebook access, and message reading, check out our step-by-step instructions on how to pair your iPhone 6 with the Entune Audio system.

Step-By-Step iPhone 6 Pairing Instructions for Toyota Tundra

Applied to the Entune Audio System:

  • Click the “house key.
  • Choose the “In the display’s upper right corner, there is a setup icon.
  • Select “Bluetooth
  • Select “Add

On a smartphone that is compatible:

  • Select “from the apps menu, settings.
  • Verify Bluetooth is turned on.
  • Choose your “Name of the vehicle from the list.
  • Enter the PIN or verify the passkey that is displayed on the car’s display.
  • If necessary, choose “OK or “Pair.
  • You will then see that you have a successful pairing with your phone on your Entune Audio system.

You might need to enable the messaging feature in the Bluetooth menu on your iPhone in order for your Entune Audio system to display messages on the touchscreen. Following are the instructions:

  • Go back to the Bluetooth Menu on your iPhone.
  • select the “Where the connection status of your Toyota Tundra is displayed on the screen.
  • select the “Turn on the Show Notifications toggle.

How do I connect my 2016 Tundra’s Bluetooth?

With Bluetooth technology, the 2016 Toyota Tundra makes it easy to stay connected. Here’s how to use Bluetooth to connect your compatible smartphone to your Tundra.

  • Turn Bluetooth on by going to the settings on your phone.
  • Activate your Tundra’s “Next to the Entune touchscreen is an apps button.
  • Press “Setup” and “Bluetooth” after selecting them “Add.
  • When the display on your phone “Select the Toyota Tundra under Bluetooth devices to start pairing.
  • Select “To finish the pairing, select Ok on the Tundra’s Device Setup screen.

You are now prepared to use Bluetooth audio and phone services. Start by pressing the Phone and Audio buttons on Entune. Or, utilize the voice recognition feature built into the steering wheel and provide a command like “Listen to Bluetooth Audio.

Visit Mike Calvert Toyota in Houston to see the 2016 Toyota Tundra for yourself.

The stock photo is being used solely for illustration reasons and is not a true representation of the listed company, dish, or activity. Any individual shown in the stock photo is a model.

Why won’t my Toyota Tundra’s Bluetooth function?

Reset the phone and remove it from the truck, if you haven’t previously. When updating the phone software or the truck software, there have been connection problems. Delete and re-pair frequently works. This.

How come my phone and Toyota won’t connect?

The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.

Soft Reset

The Toyota Entune multimedia system can be quickly and easily reset using the following technique:

  • Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
  • Hold off till the multimedia screen turns on.
  • For 12 seconds, firmly press and hold the PWR-VOL knob.
  • Toyota Entune ought should restart and work normally.

Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:

  • While the engine is off, turn on the electrical systems.
  • Hold off till the Entune system turns on.
  • Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
  • Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.

Hard Reset

If the prior approach didn’t work, you must carry out the following actions:

  • Do not start the engine; instead, press the Engine button twice.
  • The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
  • The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
  • Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.

The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.

Software Reset

Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.

  • Without starting the engine, start the vehicle.
  • Remove Entune from any Bluetooth devices that are currently in use.
  • Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
  • Select the Setup menu on the display after the restart is finished.
  • Choose General from the menu.
  • Locate and click the Delete Personal Data button.
  • Check that everything is working properly by starting the car.

How can I pair my automobile with my Bluetooth-enabled phone?

from your phone, pair

  • Verify that your car is paired and ready for discovery.
  • Open the Settings app on your phone.
  • Then select Connected devices. Tap “Bluetooth” if you see it.
  • To pair a new device, tap. Name of your vehicle.

How can I restart my car’s Bluetooth?

The best approach to accomplish this is to turn off Bluetooth on both your smartphone and your car. Remove your smartphone from the infotainment system in your car, along with any history of connected devices. After that, turn off the car and restart your phone while still in it.

How can I pair my Toyota with my Bluetooth device?

It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.

Android Directions

Using Android:

  • Select “Settings
  • Switch on “Bluetooth
  • Press “search for gadgets
  • Push “SETUP
  • Pick “Add New Equipment
  • Press “Create a discoverable system

Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!

iPhone Directions

Using an iPhone

On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.

EntuneTM App Suite and Hands-Free Bluetooth

You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.

Need to Order Some Stuff for Your Toyota?

Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.

How can my Bluetooth be reset?

Setup Bluetooth again The first step is to select the Advanced drop-down menu under Settings -> System. 2: Choose Reset settings and then click Reset Bluetooth, Wi-Fi, and Mobile. 3: When prompted, enter the PIN for your phone by tapping the Reset settings option below.