How To Connect Bluetooth To Toyota Highlander 2012

Toyota / By

Drivers must develop ways to use mobile devices safely while operating a vehicle as staying connected at all times becomes the norm. With the help of tools like the Entune system, automakers have become more intelligent and improved their vehicles to meet drivers’ shifting technological needs. To make traveling with a smartphone in tow safer and more practical, our team at Hesser Toyota is offering advice on how to sync the iPhone with the Toyota Highlander Bluetooth.

Bluetooth pairing instructions for the iPhone

According to the Highlander Entune system:

  • Hit the HOME key.
  • Choose SETUP (found in the upper right corner of the display screen)
  • Choose BLUETOOTH
  • Select ADD

Using an iPhone:

  • Choose SETTINGS.
  • Click BLUETOOTH.
  • Set the Bluetooth toggle to “ON.”
  • Choose the Highlander system from the available devices.
  • Put in the PIN that is displayed on the Highlander’s Entune system.
  • Click PAIR/OK.

What does Bluetooth do?

Drivers can use Hands-Free Calling, Siri Eyes Free, and music streaming when they pair their devices with the Entune system’s Bluetooth. Without taking their eyes off the road or their hands off the steering wheel, drivers may use voice commands to make phone calls, stream music, or use their preferred iPhone features.

How can I configure Bluetooth in my Toyota 2012?

It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.

Android Directions

Using Android:

  • Choose “Settings”
  • Activate Bluetooth.
  • Activate “Scan for devices.”
  • Input “SETUP”
  • Choose “Bluetooth”
  • Choose “Add New Device”
  • To make this system discoverable, click.

Select “Android car multimedia is available. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!

iPhone Directions

Using an iPhone

On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.

EntuneTM App Suite and Hands-Free Bluetooth

You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.

Need to Order Some Stuff for Your Toyota?

Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.

The Highlander from 2012 does it have Bluetooth?

2012 Toyota Highlander Limited with a variety of options is the vehicle we’re testing. We are a little bummed that the base Highlander, which starts at more over $28,000, lacks Bluetooth or normal iPod/USB connection.

How can I use Bluetooth to link my iPhone to my Toyota Highlander?

How to Bluetooth Connect an iPhone to a Toyota

  • Make sure Bluetooth is turned on in your iPhone.
  • Go to Apps after turning on your Toyota EntuneTM system.
  • Your touchscreen’s Setup option should be clicked.
  • Select Bluetooth, then click Add New Device.
  • Click Add after locating your iPhone on the EntuneTM screen.

Can’t get Bluetooth to work with a Toyota?

Here are the steps for each: The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.

How can I pair my phone with the Bluetooth on my Toyota?

How to Install Bluetooth in a Toyota

  • Make sure your mobile device has Bluetooth turned on.
  • Open the Menu menu on your Entune multimedia system, choose Setup, and then select Bluetooth.
  • Choose your Toyota Entune system from the Bluetooth menu on your mobile device.
  • The Toyota Entune system and your mobile device are now Bluetooth-enabled.

My 2012 Toyota Highlander has a Bluetooth gadget, how can I get rid of it?

Remove a gadget:

  • From the Home screen, click SETTINGS.
  • Choose DEVICES.
  • Choose Bluetooth and activate the setting.
  • Choose the device number you want to remove.
  • Choose Repair This Device should be unpaired.
  • Choose Yes.

Soft Reset

The Toyota Entune multimedia system can be quickly and easily reset using the following technique:

  • Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
  • Hold off till the multimedia screen turns on.
  • For 12 seconds, firmly press and hold the PWR-VOL knob.
  • Toyota Entune ought should restart and work normally.

Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:

  • While the engine is off, turn on the electrical systems.
  • Hold off till the Entune system turns on.
  • Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
  • Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.

Hard Reset

If the prior approach didn’t work, you must carry out the following actions:

  • Do not start the engine; instead, press the Engine button twice.
  • The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
  • The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
  • Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.

The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.

Software Reset

Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.

  • Without starting the engine, start the vehicle.
  • Remove Entune from any Bluetooth devices that are currently in use.
  • Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
  • Select the Setup menu on the display after the restart is finished.
  • Choose General from the menu.
  • Locate and click the Delete Personal Data button.
  • Check that everything is working properly by starting the car.

How can I pair my automobile with my Bluetooth-enabled phone?

from your phone, pair

  • Verify that your car is paired and ready for discovery.
  • Open the Settings app on your phone.
  • Then select Connected devices. Tap “Bluetooth” if you see it.
  • To pair a new device, tap. Name of your vehicle.

When was Apple CarPlay added to the Toyota Highlander?

One of the most popular family crossover SUVs in America over the last few years is the Toyota Highlander. If the Highlander is one of your top contenders for your future vehicle, you may already be looking into its technological and comfort features. You’ve come to the correct place if you’ve been wondering whether the Highlander supports Apple CarPlay. We conducted the research so you may enjoy reading it.

Apple CarPlay compatibility is a standard feature on the audio and multimedia system of the Toyota Highlander for model year 2022.

Sounds intriguing, no? Continue reading to learn a lot more about the Toyota Highlander, its compatibility with Apple CarPlay, and its other features.

Why isn’t my Bluetooth working?

Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.

Why isn’t my car’s Bluetooth functioning?

Is your vehicle’s Bluetooth not functioning properly? Do you use Apple or Android devices? Before you start pulling out your hair, try these techniques! You might want to go over how to couple with your automobile first.

The most common customer complaints we receive have to do with syncing Android contacts. The user cannot access contacts while the phone is pairing itself. No names, no numbers, or numbers only. How come? There is an easy answer!

ISSUE: Bluetooth commands in the car cannot be used to access contacts on an Android phone. Perfect pairing, but you can’t access your contacts or phone numbers.

Solution: When you first pair the phone with Android, make sure all of the dialogue boxes are checked. Has your phone been paired before? No need for concern! Simply remove the car from your phone’s list of associated devices, remove the phone from your vehicle’s list of paired devices, and RE-PAIR your phone!

Once pairing is complete, many Android devices, unlike Apple goods, will ask for different accesses.

The car might request access to contacts, SMS, audio recording, and other features; select “Allow” and then select “Do Not Ask Me Again” to dismiss the prompts in the future.

Many Apple users express worries that their car cannot access their contacts, much like Android users do. Although the phone is connected, the car doesn’t seem to be able to access contacts. The answer is simple!

ISSUE: Apple iPhone/iPad pairs with the car’s Bluetooth system without a hitch, but contacts cannot be accessed.

FIX: Ensure that the contacts can sync on your smartphone. Select “Settings,” then “Bluetooth,” and then look for the car that’s having trouble pairing. As soon as you tap the I button next to the car, make sure “Sync Contacts” is ticked in every box.

Important: You must still complete the process after choosing to “Sync Contacts”! Completely shut off the engine before opening and closing the driver’s door. Restart the engine after that, and then choose your phone from the list of linked devices! You should be all set!

Do you still have issues getting your phone and car to sync via Bluetooth? There is one tried-and-true thing you can do even if your bluetooth isn’t functioning. Remove, Remove, Replace!

In many cases, it is simpler to simply unpair Bluetooth and re-pair than it is to try to diagnose a problem while paired. Here is how to accomplish it:

1) On your phone, go to the Bluetooth settings and completely erase the vehicle you want to connect to.

2) Go to the vehicle’s Bluetooth settings and completely erase the phone you’re attempting to connect.

Recouple the two! Enter the vehicle’s “Bluetooth” menu and let it look for a device. Turn on Bluetooth on your phone and wait up to 30 seconds for the vehicle to show up on the list. then stick to the directions!

DID YOU FIND THESE ADVICES USEFUL? ARE YOU STILL HAVING PROBLEMS? COMMENT BELOW AND LET US KNOW!