- Select HOME from the menu.
- Choose SETUP (found in the upper right corner of the display screen)
- Choose BLUETOOTH.
- Pick ADD.
In This Article...
How can I pair my phone with the Bluetooth on my 2010 Toyota?
It’s really simple to connect your device over Bluetooth once you know how. Decide between an Android or an iPhone, then follow those instructions. Keep in mind that in order to use phone apps in your Toyota vehicle, you must first register a Toyota EntuneTM account.
Android Directions
Using Android:
- Choose “Settings”
- Activate Bluetooth.
- Activate “Scan for devices.”
- Input “SETUP”
- Choose “Bluetooth”
- Choose “Add New Device”
- To make this system discoverable, click.
Select “Car Multimedia on your Android. Accept the phone’s pairing request and press “Accept on the touchscreen of your Toyota. Toyota and your phone are now connected!
iPhone Directions
Using an iPhone
On your iPhone, tap “Car Multimedia,” then tap “Pair. Press “Accept” once more on your Toyota touchscreen. Toyota and your iPhone are now connected.
EntuneTM App Suite and Hands-Free Bluetooth
You’ll need a USB cord to use your phone’s apps with your Toyota. The prior Bluetooth configuration was made exclusively for hands-free EntuneTM use. It makes your EntuneTM capable of voice commands so you can keep your eyes and attention where it’s most needed: on the road.
Need to Order Some Stuff for Your Toyota?
Visit our Parts and Accessories page to see everything we have available for your vehicle. Check out our service deals while you’re there to ensure you’re receiving the greatest bargain.
How can I make a phone connection to my 2010 Toyota Highlander?
- Make sure your phone’s Bluetooth is turned on.
- the Scan For Devices option
- Push the Setup button on the screen in your car.
- Select Bluetooth next.
- the Add New Device button
- Choose Make this System Findable.
- When your phone sends you a pairing request, accept it.
- The pairing of your device and vehicle will be verified by a confirmation.
Always launch the app on your phone first before using the system, and make sure your phone is plugged into the Entune App Suite. To accomplish this, select Setup from the menu, then Bluetooth, Paired Device List, your phone, then Connect. You should be aware that utilizing Entune requires using the internet, thus data charges may be necessary.
Be at ease! Come by and say hello! We are pleased to assist you in syncing your phone with your Toyota car. In Martinsburg, West Virginia, at 650 Foxcroft Avenue, we are easily accessible.
How can I use my Toyota Highlander’s Bluetooth to play music?
How to Bluetooth Connect an Android Phone to a Toyota
- Make sure Bluetooth is turned on in your Android device.
- Go to Apps after turning on your Toyota EntuneTM system.
- On your Toyota touchscreen, select Setup.
- After selecting Bluetooth, choose Add New Device.
- Permit your Android and Toyota to locate and connect to one another.
Can’t get Bluetooth to work with a Toyota?
Here are the steps for each: The Bluetooth setting in the car might not be on. Go to the menu, setup, Bluetooth, detailed options, and make sure Bluetooth power is on to check this feature. Ensure that Bluetooth is enabled on your phone. You may do this in the settings of your phone.
Soft Reset
The Toyota Entune multimedia system can be quickly and easily reset using the following technique:
- Put your key in the ignition lock and turn it to the “On” position, or start the engine by pressing the Engine button twice.
- Hold off till the multimedia screen turns on.
- For 12 seconds, firmly press and hold the PWR-VOL knob.
- Toyota Entune ought should restart and work normally.
Before moving on to more advanced techniques that will also remove part of your data, it is usually worthwhile to try this method first, even though it doesn’t always succeed. Alternately, attempt these:
- While the engine is off, turn on the electrical systems.
- Hold off till the Entune system turns on.
- Take your phone, then un-sync Toyota with all of your other Bluetooth devices.
- Go to Bluetooth connections on the Entune screen and take your phone out of the list of recognized devices.
Hard Reset
If the prior approach didn’t work, you must carry out the following actions:
- Do not start the engine; instead, press the Engine button twice.
- The multimedia system’s physical Apps button should be pressed and held. Turn the lights on and off three times without letting go. On the screen will come a selection called Diagnosis Check.
- The screen’s INIT button should be pressed and held. You will receive a “Personal data is initialized” notification. OK? which will elicit a “Yes” from you.
- Check to see whether all Bluetooth connections, radio stations, and phone calls have been disconnected before starting the engine.
The most effective way to guarantee a long-term, bug-free operation is to use this procedure, which wipes out all of the saved data and effectively returns Entune to factory default condition.
Software Reset
Using software commands solely is an alternative to the hard reset technique. Additionally, this may delete your data, so proceed with caution and back up any crucial information.
- Without starting the engine, start the vehicle.
- Remove Entune from any Bluetooth devices that are currently in use.
- Similar to the first way, press and hold the PWR-VOL button for roughly 12 seconds.
- Select the Setup menu on the display after the restart is finished.
- Choose General from the menu.
- Locate and click the Delete Personal Data button.
- Check that everything is working properly by starting the car.
Does the Toyota Highlander from 2009 have Bluetooth?
Bluetooth Car Interface Built-In To the standard Toyota Highlander 2009 OEM car radio, Hands Free Calling and Wireless Audio have been added. The device has a microphone and Bluetooth built in.
In my Toyota, how can I set up Bluetooth?
How to Install Bluetooth in a Toyota
- Make sure your mobile device has Bluetooth turned on.
- Open the Menu menu on your Entune multimedia system, choose Setup, and then select Bluetooth.
- Choose your Toyota Entune system from the Bluetooth menu on your mobile device.
- The Toyota Entune system and your mobile device are now Bluetooth-enabled.