In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
In This Article...
How can I turn off my Toyota’s maintenance light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How can I disable my Toyota Corolla’s maintenance-needed light?
Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How can I turn off the Toyota Camry’s maintenance is required light?
Push and hold the odometer button on your dashboard briefly, then quickly turn your key to the second position. Hold the odometer button down for a further 10 seconds. The maintenance light should flash and you could hear a beeping if everything is done correctly. Your Toyota Camry’s maintenance light ought to go out after doing that.
How do you press the button on a Toyota RAV4 to turn off the maintenance is necessary light?
You should switch off the service light if it’s still on after your RAV4 has gotten maintenance. How to reset a maintenance light is as follows:
- Put the ignition on with your key. Turn the key to the first position. This is the position right before the automobile starts.
- On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds. Next, turn your key to the second position.
- Hold the odometer button down for another five or so seconds. The light ought to beep, flash, and then shut off.
- Release the odometer button after it is off. your vehicle off. If the maintenance light on the Toyota RAV4 is still on, only carry out this procedure one or two more times to turn it off.
Get your RAV4 serviced if your maintenance light is still on. Follow your owner’s handbook to learn more about the suggested maintenance schedule for your RAV4 configuration. Maintenance lights can indicate a significant issue.