- Turn the key to the lock using your keys “Put the ignition in the “on” position but don’t start your Toyota Corolla. Put the Corolla’s keys in.
- Find, select, and hold the “The odometer has a reset button for trips. till you release the button “On the screen, Trip A can be seen.
- then replace the key to “Off.
- Turn the key back to the “On position after finding the “trip reset button once more.
- Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.
In This Article...
What does the 2010 Toyota Corolla’s maintenance required light mean?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why does my Toyota Corolla indicate that maintenance is soon needed?
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- The ODO display will briefly flash before beginning to display only zeros.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
- Now the light will read “MAINT REQD.”
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
How can the dashboard lights be turned on in a 2010 Toyota Corolla?
Congratulations on purchasing your first automobile! I’m delighted to report that the Corolla’s *dashboard light controls** make it simple to turn on and adjust your dashboard lights. Use them as follows.
Typically, when you start your automobile, your dashboard lights should come on. If they don’t, your dashboard light controls may have them completely dimmed.
Find the dashboard light switch to the left of the steering wheel once your car is running. This will either be a knob or a wheel, depending on the year of your Corolla. Next to the control, you should see a tiny image of your speedometer. You can adjust the brightness or dimness of your dashboard light with the control.
If the dashboard lights are still not functioning, a fuse may have blown. Although they are quite simple to replace, you’ll need to see a professional.
It’s a big thing getting your first car! You might have to pay more for insurance if you’re a new driver or a young one. With Jerry, the insurance super app, you can make sure you’re getting the most affordable insurance imaginable! For free, instant, affordable insurance quotes, download Jerry today!
Why does my maintenance light come on after I change the oil?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.