How To Change Wiper Blades Toyota Corolla 2011

Start with the Corolla’s driver’s side. The majority of blades are secured by a small clip. As if sliding the blade along the wiper arm, push that clip up toward the arm while pushing the blade backward.

How are Toyota Corolla windshield wipers removed?

Toyota Corolla Windshield Wiper Replacement from 2012 to the present

  • First, wipe the windshield.
  • Use a flathead screwdriver to gently pry open the wiper’s locking mechanism.
  • Once it locks into place, lower the wiper blade.

How big are the wipers on a Toyota Corolla?

Depending on the model year, the Toyota Corolla requires a different size wiper blade.

In contrast to the 2008 Toyota Corolla, which needs a 24″ driver’s side blade and an 18″ passenger side blade, the 2022 Toyota Corolla needs a 26″ driver’s side blade and a 16″ passenger side blade.

The Toyota Corolla’s wiper blades are a crucial safety element and should be routinely inspected, cleaned, and replaced as needed.

Check your blades once a week or anytime you find that they are not preserving the visibility of your windshield.

It’s crucial to utilize the proper Toyota Corolla sizes when it comes time to change the wiper blades.

For thorough information about your specific Toyota Corolla model year, scroll down or quickly jump.

A 2009 Toyota Corolla windshield wiper replacement is simple.

When the wipers are halfway down your windshield, turn on your wipers before turning off your Toyota Corolla.

Lift your wipers up from the windshield

It should be simple to lift your wipers up and away from your windshield once they are stopped halfway on your windshield. The old wipers on your windshield should protrude and point away from you. Now providing for simple access throughout the remaining modifying procedure.

Before you remove old wiper blades

Make sure to note which side the new blade length belongs on. Measure the previous blades’ length or simply compare it to the new Trico wiper blades. Then, position the fresh blades on the appropriate side.

Remove old wiper blades

The windshield wipers on your 2009 Toyota Corolla connect to a little hook connector on the vehicle. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.

What size wipers can I use on my 2011 Toyota Camry?

Inconvenient windshield wipers can be a huge pain! Your Toyota Camry’s year will mostly determine what size windshield wipers you require. The dimensions of the Toyota Camry windshield wipers are listed below by year:

  • 26 inches for the driver’s side blade and 20 inches for the passenger side blade from 2018 to 2022
  • 26 inches for the driver’s side blade and 18 inches for the passenger side blade from 2012 to 2017.
  • 24 inches for the driver’s side blade and 20 inches for the passenger side blade from 2007 to 2011.
  • 20022006: Driver side blade measures 24 inches; passenger side blade measures 19 inches.

Hope this is useful! Along with maintaining your Toyota Camry, you should also make sure it is protected by the appropriate auto insurance plan. Fortunately, the Jerry app can make finding insurance a breeze!

When using Jerry for the first time, all you have to do is respond to a few brief questions before you can begin comparing auto insurance quotes from the best insurance companies in one location. From there, you can select the coverage package that offers the best value for your needs.

Starting up takes less than a minute, and the typical Jerry user saves $887 year on auto insurance!

How can I find out how big my windshield wipers are?

Verify Your Manual The owner’s manual for your car should specify what size wiper blades you need for each side and might even suggest a particular brand. Before replacing the blades, read the instructions carefully as certain vehicles have varying size requirements for the driver and passenger sides.