When your Toyota Highlander’s wipers are halfway down your windshield, switch them ON before turning them off.
In This Article...
Lift your wipers up from the windshield
It should be simple to lift your wipers up and away from your windshield once they are stopped halfway on your windshield. The old wipers on your windshield should protrude and point away from you. Now providing for simple access throughout the remaining modifying procedure.
Before you remove old wiper blades
Make sure to note which side the new blade length belongs on. Measure the previous blades’ length or simply compare it to the new Trico wiper blades. Then, position the fresh blades on the appropriate side.
Remove old wiper blades
The windshield wipers can attach to a little hook connector on your 2019 Toyota Highlander. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.
How can you take the Toyota wipers from the windshield?
It takes a little more effort to install detachable rubber inserts. Although we install inserts into a Toyota Auris in our video instruction, the process is the same for other current Toyota models.
Step 2Look for the release tab after tilting the blade to the horizontal position. To remove the arm, slide it open. Pull out the rubber insert from the wiper blade’s open end by locating it. Seize the two metal reinforcements firmly.
Step 3: Insert the new insert into the outside grooves, then slide in the two metal reinforcements. The implant will maintain its shape as a result. Make sure the insert goes through each retaining hook as you now run it through the wiper.
Step 4Repeat the procedure, removing the rubber insert and installing a new one, for the opposite wiper blade arm. The wiper arms should then be carefully lowered back onto the windscreen.
What size wiper blades fit a Highlander?
Depending on the model year, the Toyota Highlander requires a different size wiper blade.
The 2022 Toyota Highlander, for instance, calls for a 24″ driver’s side blade and an 18″ passenger side blade, whereas the 2019 Toyota Highlander calls for a 26″ driver’s side blade and a 20″ passenger side blade.
The Toyota Highlander’s wiper blades are a crucial safety feature and should be routinely inspected, cleaned, and replaced as needed.
Check your blades once a week or anytime you find that they are not preserving the visibility of your windshield.
It’s crucial to utilize the proper Toyota Highlander sizes when it comes time to change the wiper blades.
For comprehensive details on your specific Toyota Highlander model year, scroll down or quickly jump.
How much does a Toyota Highlander windshield replacement cost?
Oh no, hitting a deer can cause injuries to your car as well as you. For a Toyota Highlander windshield replacement, budget anywhere from $200 for a model year 2004 up to $1,300 for a 2021 model.
You might be curious as to why there is such a large pricing disparity. It all boils down to the technology found in modern automobiles. Many automobiles now have sensors and cameras built into the windshields, but they also need to be calibrated after the replacement of the windshield.
After paying your deductible, if you have comprehensive auto insurance, you will be protected if you strike a deer. You will be responsible for covering the replacement costs if you don’t have comprehensive insurance.
Here’s to getting your windshield replaced as soon as possible and getting your Highlander running again!
Unfortunately, many owners of cars and SUVs cut their insurance coverage to save money, but you don’t have to do that to lower your premiums. The Jerry app will look through more than 50 major insurers to get you an affordable, personalized coverage!
How do I choose the right windshield wipers?
Every car has a size of wiper blade that is recommended by the manufacturer for that particular make, model, and year. It’s crucial to get a new blade that is the right size for your specific vehicle. Finding the appropriate wiper size for your car can be done in a few different ways:
The two blades may be different sizes on some cars, so it’s important to install the right size on both the driver’s and passenger’s side.
Why Size Matters
If you install wiper blades on your car that are longer than what is advised, the wipers may collide and harm the wiper motor or the blades themselves. Additionally, a blade that is too large could not adequately fit the window’s design, leading to visibility loss and uncleared areas. Or the windshield trim may be struck by the blade.
Loss of visibility results from blades that are too narrow for the car to clear the entire windscreen. Always use wiper blades that are the proper size for your vehicle’s make, model, and year.
How are wiper blades changed on a 2015 Toyota Highlander?
The windshield wipers on your 2015 Toyota Highlander connect to a little hook connector on the vehicle. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.
Wiper blade and refill
To replace the wiper blades’ worn-out rubber component, buy refills. The entire blade does not have to be purchased.
Nothing is more essential than having clear visibility when you’re driving. But I frequently put off replacing my wipers, just like the majority of other drivers. Wipers should be changed every six months, particularly if you park outside and live in a dusty area like the desert.
The lower wiper arm that sticks out from the cowl, the blade that fastens to the wiper arm, and the rubber refill that wipes the glass make up your windshield wiper assembly. The component that eventually degrades due to harsh weather, dust, and filth is the thin rubber replacement. Most of the time, as we demonstrate in this post on how to change wiper blades, you can simply replace the wiper refill.
The blade can, however, also deteriorate and lose its grip on the glass, or even slightly bend due to ice and snow. Replace the entire blade if there is chatter or if the entire blade isn’t making contact with the windshield. Wiper blade installation simply takes a minute. Every two years, you need change the entire blade (which is offered with refills).
Tip: Cleaning your windshield every time you fill up with gas will prolong the life of your wipers and keep them functioning properly. To eliminate grit, you should also wipe the entire rubber insert with a wet cloth.