Like many cars, the Toyota Tundra requires maintenance from time to time. It’s time to inspect and/or replace your brake pads if you hear squeaking or grinding while you brake. Here is a how-to manual for the task.
The resale value and general safety of a Toyota Tundra depend on regular maintenance. Here is a guide on maintaining the best possible performance from your brakes.
Fortunately, replacing the Tundra’s brakes is not too difficult. They have a pad and an anti-rattle spring on a disc brake. It really just comes down to being careful when removing the calipers to avoid snapping a line. To prevent them from squeaking or freezing up, you can use a variety of lubricants on the screws/bolts and the brake pads.
- Make sure you have a well-lit space and a variety of mechanics tools, including as sockets, wrenches, breaker bars, and jack stands, before you start this project. Additionally, be sure to apply the parking brake.
- On the side you want to work on, loosen the lug nuts. After that, raise the car and use jack stands to support it. Take the tire off.
- Locate the two side bolts on the back of the caliper by looking at it. Often, you can swivel the front wheels to get a better view of them. Take these bolts out.
- Lift the caliper off the rotor gently. To avoid squeezing the brake lines, hang or secure the rotor.
- On the outside of the rotor, look for the brake pad retaining clips or anti-rattle clips. With needle-nose pliers, remove this clip, then take off the brake pads.
- In the same manner that you removed the old brake pads, replace them.
- The caliper must then be compressed. Either a specialized caliper compression tool or a c-clamp and an old brake pad can be used for this. The caliper piston and brake pad should be laid side by side before performing the c-clamp trick. The caliper will compress as the c-clamp is tightened.
- Replacing the bolts once the caliper has been compressed.
- Finally, reinstall the tire, tighten the lug nuts with a finger, and then lower the car to the ground. the lug nuts must then be tightened.
- Press the brake pedal until the brakes become hard once again after replacing the tire and installing the new brake pads.
- Brake fluid should be checked and added as necessary.
- Congratulation on replacing the front brakes.
You may stop fast and effectively when you need to by maintaining your brakes to the manufacturer’s guidelines. When you do change them, it’s crucial to utilize high-quality components. Find genuine Tundra components here.
In This Article...
How much does a Toyota Tundra’s brake system cost to replace?
Replacement brake pads for a Toyota Tundra typically cost between $229 and $277. While parts are priced between $137 and $162, labor costs are predicted to range between $92 and $116. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account.
How long do Toyota Tundra brake pads last?
Depending on your driving habits, Toyota Tundra brake pads typically last between 30,000 and 70,000 miles. You’ll need to get an examination more frequently if you travel in heavy traffic and brake frequently.
When should a Toyota Tundra get its brakes replaced?
Depending on the aforementioned variables, 2021 Toyota Tundra rotors often require complete replacement every 30,00080,000 miles. For further guidance, it is always recommended to consult your Toyota Tundra repair handbook.
How much do brake repairs cost at Toyota?
What is the price of a brake job? Depending on the type of brake pad desired, brake pads for a Toyota might cost anywhere between $150 per axle and $450 per axle. For all four brake rotors to be replaced, the cost might range from $300 to $750. The labor and parts costs are included in this estimate.
How long do Toyota brakes from the factory last?
How durable are Toyota brake pads? Depending on your driving habits, Toyota brake pads typically last between 30,000 and 70,000 miles. You should get an examination more frequently if you commute in congested traffic and apply the brakes frequently.