It might be time to change your car battery if you hear a clicking sound when you turn the key in your Toyota Corolla. When the lights and radio in your Corolla stop working, that is another indication that the battery has gone. A new battery may be installed and removed in a few simple steps, but you must be able to lift 30 to 40 pounds, which is the weight of the majority of automobile batteries.
In This Article...
Step 3
With a combination wrench, unfasten the bolts holding the cable to the black (negative) cable before removing the present battery. From the battery, unplug the cable. Do the same thing with the red (positive) cable. Pull the battery from your Corolla carefully, then dispose of it in accordance with local legislation.
Step 4
Use a wire brush to clean the battery clamps and the tray where the battery lies in the battery holder. This procedure clears the new battery’s connection of any rust or other debris.
In the battery holder tray, put the fresh battery. Reconnect the battery’s red and black cables first. To keep the cables connected to the battery, tighten the bolts. Your Corolla’s hood should be closed. You can now start driving your automobile.
How can a car battery be changed without damaging it?
How to replace your car’s battery without erasing your radio’s code
- change the battery in your car.
- Find your battery in Step 1.
- Step 2: Install your backup power supply.
- 3. Release the clamp that is holding your battery in place.
- Step 4: Get rid of your outdated batteries.
- Connect your new battery in step five.
- Step 6: Install the new battery using a clamp.
Does AutoZone replace batteries?
As long as you buy the batteries from AutoZone, they will install it for free.
In exchange for a small cost, they will remove your old battery and take it elsewhere.
Your car will start smoothly and function effectively after the new battery has been installed thanks to the professional who installed it.
They might decline to install your battery if the installation is challenging.
If reaching the battery compartment or housing requires removing other parts of the car, the workers won’t install batteries.
What is the price of a Toyota Corolla battery?
Cost estimation for replacing a Toyota Corolla battery. A new battery for a Toyota Corolla typically costs between $327 and $334. Between $26 and $33 is the projected cost of labor, while the cost of the parts is $301.
Step 1. Remove cables from battery terminals
Loosen the nut and bolt holding the battery cable clamp to the negative terminal (this will be marked with a minus sign or “NEG”); this is necessary for vehicles with a negative ground. You would first loosen the positive cable if your car has a positive ground (your manual will tell you which your car has and the correct order for removing battery cables).
Step 2. Remove the screws or fasteners holding the battery in place; then Remove the Battery
Don’t let the battery screws roll beneath the car and keep track of where you put them. Put on gloves and carefully remove the battery.
Step 3. Inspect the tray the old battery was resting on
Use a little baking soda and water to make a cleaning solution to use on the tray underneath if it is corrosive or rusted. Do not proceed without first donning gloves. Additionally, this is the perfect time to clean the battery terminals.
Step 6. Reconnect your battery cables in the reverse order in which you took them off
(For instance, the positive cable is rejoined first in a car with a negative ground). Ensure that all of the clamps that have been reconnected have a firm hold on the posts.
Step 7. Dispose of your old battery properly
Batteries must be disposed of properly and lawfully because they are poisonous and destructive. Old batteries can be dropped off at specialized recycling facilities for a little fee, and they will dispose of them for you. You should NOT put used automobile batteries in your trash or recycle bin.
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.