It must be annoying to be unable to set the clock in your Toyota Corolla, but the good news is that doing so is simple and shouldn’t take more than a few minutes.
If your 2009 Toyota Corolla needs its clock adjusted, you should:
- Start the engine by turning the ignition key.
- The trip stem is in the instrument cluster’s corner.
- Press the stem firmly until the minute digits begin to flash.
- To change minutes, turn the trip stem.
- Wait for the hour digits to begin flashing before using the trip stem to change the hour.
- Your automobile will automatically quit the clock-setting mode after around 5 seconds.
Finally, use Jerry, a free insurance comparison app, to compare rates from more than 50 different insurance providers, including Travelers, Nationwide, and Progressive, to make sure you’re not overpaying for auto insurance for your Corolla.
You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. After choosing, they’ll even help you cancel your old insurance!
In This Article...
How is the clock on a Toyota reset?
Every year, British Summer Time (BST) and Greenwich Mean Time (GMT) are switched between the UK clocks, making it difficult for us to remember how to change the time on the digital clock in our automobiles.
Remembering which button does what in your car’s cabin can be challenging. It may be simple to remember to add an hour on the last Sunday in March and subtract an hour on the last Sunday in October.
Here is how to change the clock in any current Toyota model to help make your life a little bit easier.
Most recent models include clocks that are part of the multi-information display and can be changed using the in-car settings. However, some people continue to utilize traditional buttons.
Adjusting the time using physical buttons
The central console’s physical clock adjustment controls, which are situated on this particular model just beneath the clock display, are now only found on the Land Cruiser model.
Three buttons are located here: “H,” “M,” and “:00.” The ‘H’ and ‘M’ buttons advance the clock by one hour and one minute, respectively, when pressed. The button marked “:00” rounds to the nearest hour.
Adjusting the time using in-car menus
To reach the proper settings menu on models where the clock is a component of the multi-information display in the instrument cluster, utilize the steering wheel buttons.
Start by pressing and holding the ‘DISP’ button on the steering wheel to activate the adjustment mode while your car is still moving.
By pushing and holding the “DISP” button, choose “CLOCK.” Every time you push the “DISP” button, the hours will be highlighted and the clock will go forward by one hour. Use the same procedure to set the minutes after waiting five seconds to validate the hours. Wait five more seconds after setting the minutes before checking the time.
The Aygo equipped with a multimedia system similarly has a menu-based method for changing the clock. Press the “Menu/Select” knob to start, then choose “SETUP,” “GENERAL,” and “Clock” from the menu that appears on the screen. The next page allows you to change the 12- or 24-hour time format as well as cycle through the hours and minutes and set the minutes to 00.
What if I own an older Toyota?
The majority of Toyotas from recent years should be covered by the instructions above. The MyToyota owner’s portal makes it easy to download an owner’s manual for your specific vehicle if you need more detailed instructions. If you haven’t already created a MyToyota account, do so now, register your car, and you can immediately get the appropriate manual for your vehicle.
On my 2016 Toyota Corolla, how can I change the time?
Drivers need only push the hour button (labeled with a “H) and the minute button (labeled with a “M) on the 2016 Toyota Corolla’s digital clock to change the time. Drivers will keep pressing each corresponding button until the figures indicate the proper time.
Why does the time on my car’s clock continually changing?
If your car’s clock resets each time you turn it on, there may be a problem with the battery, fuses, ignition, or internal wiring. The easiest way to fix your car’s clock is to have it properly diagnosed by a mechanic.
Your clock’s issue is probably caused by a few different things, and each one needs a different solution. If one of these is making your clock reset, it might be wise to have your car serviced by a mechanic:
- Your battery is probably to blame. Every three years, car batteries should be replaced because they will begin to malfunction after that. When you start and stop your car, those glitches might be what resets your clock.
- If you have a fuse problem, it may be a sign that a blown fuse or a bad connection is preventing electricity from reaching your clock.
- Your clock’s power disconnect could potentially be caused by a dirty ignition switch. Every time you start your engine if the flow of electricity is interrupted, the clock may have to restart.
- The most challenging issue with the set is a wiring issue. Your clock may keep shutting off frequently if there is a wiring gap.
Your best option is to have a mechanic have a look so you can be sure, whatever the cause may be. Take advantage of the time you’re waiting for your car to be diagnosed to check out the Jerry app and see how much money you can save on your insurance rate.
After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $887 year on average.