How to Replace the Battery in a Toyota Smart Key
- To remove the key cover, use a flathead screwdriver or a key.
- Battery Cover should be removed.
- Get rid of the dead battery.
- Place the Plus+ Side Up while installing the new battery.
- Put a new battery cover on.
- Switch out the key cover.
- Examine the key fob.
In This Article...
What sort of battery is needed for a Toyota Camry key fob?
A CR2032 battery, which you can get in shops and online, is used by the majority of Toyota models. These batteries are really inexpensive, usually costing less than $5. Replace the battery in your Toyota key fob within the casing, then cap it off.
The battery in my Toyota key fob has to be changed.
How to Replace the Battery in a Toyota Key Fob.
- Take the key out of the fob. Over the key portion of your key fob is a tiny metal button.
- Unlock the fob.
- Dispense with the green circuit board.
- Switch out the battery.
- Place the key inside the fob after putting the fob back together.
What kind of battery is required for a 2010 Toyota Camry key?
For Toyota Camry vehicles made from 2007 to 2018, this Toyota Key Fob Battery Replacement is the genuine alternative. For vehicle fitment, please refer to the list below. Replace the original battery from your key fob, keyless entry remote, or remote key with this Energizer CR2016 3v Lithium Battery. The highest quality components are used to create Energizer key fob battery replacements, giving you a battery that lasts forever. Make that the previous battery in your car’s remote key or key fob has a 2016 number. The battery number for your key fob, keyless entry remote, or remote key can typically be found on the back cover if it is not in your remote. The reason why Energizer key fob replacement batteries are superior to original equipment batteries is because manufacturers frequently employ lower-quality products or batteries to cut costs and entice you back into the service department where they can profit more from you, the customer.
All Energizer batteries have a long lifespan and are constructed using the best components available. The dependable power you have come to expect from major international brands like Energizer is provided by these specific application batteries. Since Energizer is the most popular battery among automotive car audio specialists, you can be confident that it is a battery you can rely on.
- 10 years of storage guarantee.
- superior lithium
- three levels of corrosion defense
- IEC: D2032
- 3.0 Volt
- Size: 2 x 20 x 20 (mm).
- 220 mAh
Numerous Toyota vehicle models can use the Energizer Key Fob CR2032 battery. the list of Toyota vehicles that this key fob battery fits is as follows:
Fits the following vehicles:
models of the Camry from 2007 to 2018
NoteThis is the proper battery if you have any other Toyota model vehicle with 2016 on the back of the remote.
The 2032 battery is typically used in Toyota vehicles from 2012 and up with smart key fobs.
The number is stamped on the battery of your key fob, so if you’re not sure for sure, just open it with a small screwdriver.
For the Keyless Entry Remote/Keyfob on your Toyota, these batteries are the ideal OEM replacement. The Battery that never stops working. Avoid being shut out by choosing inferior, less expensive brands!
How long does the battery in a Toyota key fob last?
When your Toyota key fob’s battery is running lowthe typical battery life is one to two yearsan alert will sound when the engine is turned off.
How can the battery in a 2017 Toyota Camry key be changed?
Most likely, your hub is correct! Follow these procedures to change the battery in a 2017 Toyota Camry key fob:
- Buy a fresh CR2032 battery.
- To remove the metal key, push on the side of the key fob (where it reads push).
- Pry the key fob apart with a flathead screwdriver. To stop the contents from spilling out, do it carefully.
- Remove the old battery without contacting the battery connections. Be sure to take note of the locations of the positive and negative terminals inside the key fob.
- Put your new battery in place exactly where the old one was.
- Slide your metal key back into position after snapping the two parts together.
- Make sure to check the functionality of your key fob!