On a Toyota Camry, replacing a tail light is simple, quick, and doesn’t require any special tools. Important safety elements like tail lights and brake lights let cars behind you see you and understand when you are stopping or turning. They must therefore be maintained as a result. Take a few minutes to replace your tail lights’ burned-out bulbs if necessary. Replacement bulbs are available at the Toyota dealership or at any car parts store.
In This Article...
Step 1
Locate the tail light assembly covers to the right and left of the trunk lid when you open the Camry’s trunk. Plastic and a rectangular form define the cover. It hinges to the outside edge and snaps open on the inside edge.
Step 2
Locate the light bulb sockets inside by opening the tail light assembly cover. Turn the socket counterclockwise to release it from the assembly, then remove the socket that goes with the damaged light. The turn signal is located in the top bulb, the stop light is in the second, the running light is in the third, and the backup light is in the final bulb.
Step 3
Straighten out the socket and remove it from the assembly. Take the lightbulb out of the socket. Straight out of the socket, the bulb can be thrown away. A new bulb should be inserted and pushed in until it is completely seated in the socket.
Step 4
Turn the socket clockwise until it stops, securing it in place, then insert the socket and bulb into the tail light assembly. Make sure the cover snaps shut to ensure security as you seal it. This will assist in preventing moisture and debris from entering the tail light assembly.
Ensure the lights are operational before closing the trunk. Before testing the lights, you must repeat the procedure on the opposite tail light if both of your lights are out.
Can I change my own tail light?
Fortunately, changing the tail light bulbs isn’t hard and shouldn’t take you more than 45 minutes to an hour. Be careful that newer models could be a little trickier to disassemble than older ones because there will be more wires.
Does a Toyota Camry’s brake light bulb swap out easily?
Because they don’t interfere with your vision, it’s understandable why so many burned-out taillights go unseen and unaltered. However, having a burned-out taillight makes it harder for people to see you! This can be quite problematic while driving at night because it might be difficult for people to see you when they are driving behind you when you brake or are on a road with few lights!
Fortunately, if you do find your taillight is broken, you can fix it quickly and easily. Because Toyota cars are designed to be simple for any driver to operate, changing a taillight in a Toyota Camry can be done in just 5 simple steps:
Usually, if both of your tail lights go out at once, you need to change your fuse. To identify the fuse, see your owner’s manual. If the metal component within the taillight fuse is whole, the fuse is still good; however, if the metal appears to be broken, the fuse has blown and has to be replaced.
Any auto shop and several department stores in Brampton, Ontario, will have standard tail lights for your automobile, including taillights for a Toyota Camry. To determine the size or type of light to purchase, a guide is typically provided.
In most cases, a screwdriver will be sufficient to accomplish this, but if there aren’t any screws, you might need to open the trunk to gain access to the lights. It’s time to change the bulb once you remove the covers or can see the lights.
Replace the fuse if that was the problem, then try turning on your lights again.
Like other light bulbs, the bulbs are replaceable by unscrewing them. Be careful when screwing in the replacement bulb because they are still fragile.
It’s time to put everything back together the same way you pulled it apart after changing the bulb so you can check your work!
What is the price of replacing a taillight?
The cost of repairing a broken tail light bulb ranges from $20 to $100.
The revised pricing range for 2022 is between $200 and $2,000, depending on whether it’s the lens, the wiring, or an entirely new tail light assembly. The final cost is ultimately determined by the cost of labor as well as the kind of components and machinery used.
Depending on the make and model of the car, the cost to replace the assembly will vary. Depending on the mechanic you choose, you should expect to pay less than you would at a dealership for the tail light to be fixed.
How much is a bulb for a rear brake light?
Anyone can learn how to replace a broken brake light. A replacement bulb costs approximately $10, and doing it yourself will save you about $20 in labor costs as well as the time it would take to drive to the shop and wait for the work to be completed.
Why is my Toyota Camry’s brake light on?
Braking System Alert Light indicates that the brake system is broken or that the brake fluid level is low. Additionally, when the parking brake is not released, this light illuminates. If the parking brake is fully released and the light goes out, the system is in good working order.
How is a tail light bulb changed?
Replacing a Tail Light
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat step 6 on the opposite side.