Because they don’t interfere with your vision, it’s understandable why so many burned-out taillights go unseen and unaltered. However, having a burned-out taillight makes it harder for people to see you! This can be quite problematic while driving at night because it might be difficult for people to see you when they are driving behind you when you brake or are on a road with few lights!
Fortunately, if you do find your taillight is broken, you can fix it quickly and easily. Because Toyota cars are designed to be simple for any driver to operate, changing a taillight in a Toyota Camry can be done in just 5 simple steps:
Usually, if both of your tail lights go out at once, you need to change your fuse. To identify the fuse, see your owner’s manual. If the metal component within the taillight fuse is whole, the fuse is still good; however, if the metal appears to be broken, the fuse has blown and has to be replaced.
Any auto shop and several department stores in Brampton, Ontario, will have standard tail lights for your automobile, including taillights for a Toyota Camry. To determine the size or type of light to purchase, a guide is typically provided.
In most cases, a screwdriver will be sufficient to accomplish this, but if there aren’t any screws, you might need to open the trunk to gain access to the lights. It’s time to change the bulb once you remove the covers or can see the lights.
Replace the fuse if that was the problem, then try turning on your lights again.
Like other light bulbs, the bulbs are replaceable by unscrewing them. Be careful when screwing in the replacement bulb because they are still fragile.
It’s time to put everything back together the same way you pulled it apart after changing the bulb so you can check your work!
In This Article...
Can you change the bulb in your taillight on your own?
Fortunately, changing the tail light bulbs isn’t hard and shouldn’t take you more than 45 minutes to an hour. Be careful that newer models could be a little trickier to disassemble than older ones because there will be more wires.
How is a tail light bulb changed?
Replacing a Tail Light
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat step 6 on the opposite side.
Step One
Find out first how to get to the taillight bulb on your car. While you can access the taillight housing from the outside of some vehicles, you have to open the trunk on other cars and SUVs to get to the taillight bulb.
Consult your owner’s manual if you need help figuring out how to get to the taillight bulb.
Step Two
You can decide what equipment you’ll need now that you know how to get to the taillight bulb. Either a flathead or Phillips screwdriver will probably be required. To remove the screws keeping the taillight housing in place, gather the necessary equipment. You might not require tools if the taillight housing is accessible on your car. The cloth covering may easily be removed to reveal the bulb in its socket.
Step Three
Once the housing has been removed, decide which bulb or bulbs need to be replaced. Find the light bulb holder that contains the one you need to replace. Unscrew it by rotating it about a quarter turn and pulling it out to dislodge it.
Step Four
Pulling the bulb out of the socket slowly will allow you to remove it. The majority of them simply pull out, but others might need to be turned a quarter turn. There might be some additional screws to remove depending on how your car is set up. To avoid shattering the bulb, be gentle when doing this.
Step Five
Make sure the socket is clear of any dirt and debris before replacing the bulb. In the same way that you removed it, put the bulb back into the open socket. In order to prevent damage to the bulb, you might want to use gloves.
The procedure you used to remove the old bulb should be repeated. Reinstall the taillight housing by putting in any missing screws. If you had to remove any extra components to get to the taillight bulb, replace them.
Step Six
Find out more about high-quality lighting items, where to buy your car part, or how to locate it.
Only for entertainment and informational reasons, the information in this article should not be used as a substitute for consulting a qualified technician or mechanic for expert guidance. We advise you to speak with a licensed technician or mechanic if you have any specific queries or issues regarding any of the subjects discussed here. We will not, under any circumstances, be held responsible for any loss or harm resulting from your reliance on any content.
Are the brake light and the tail light interchangeable?
Many automobiles have a single globe that houses both the braking and tail lights. In other words, both lights have the same external covering. Your car’s may be a little different, with individual globes. In contrast to brake lights, which turn on instantly when you hit the brakes, tail lights are activated by turning on your headlights or applying the parking brake. The brake lights are a brighter red than the tail lights, which are typically red on cars. White back-up lights are also included in your rear lights.
Why is my Toyota Camry’s brake light on?
Braking System Alert Light indicates that the brake system is broken or that the brake fluid level is low. Additionally, when the parking brake is not released, this light illuminates. If the parking brake is fully released and the light goes out, the system is in good working order.