- First, find a safe place and turn on the emergency lights.
- Step 2: Take off the hubcap.
- Step 3: Insert the Jack, loosen the lug nuts, and raise the Highlander.
- The fourth step is to remove the lug nuts and mount the spare.
- 5. Tighten the lug nuts, then lower them and tighten them once more.
In This Article...
The Toyota Highlander’s spare tire cannot be found.
The spare tire for your Toyota Highlander is secured to the frame’s lower part behind the rear bumper. You’ll need a wrench and your key to remove it.
Say you’re driving your Toyota and enjoying the scenery. The air is suddenly pouring out of your front right tire as you unexpectedly roll over a rusty nail. You must first be aware of where and how to obtain your Highlanders spare tire before hastily searching online for information on how to change a flat tire.
How is a 2019 Toyota Highlander tire changed?
Your Highlander Already Has the Tools
- First, find a safe place and turn on the emergency lights.
- 2. Take off the hubcap.
- Step 3: Insert the Jack, loosen the lug nuts, and raise the Highlander.
- Remove the lug nuts in Step 4 and mount the spare.
How is a spare tire changed on a Toyota?
How to Change a Flat Tire Guide
- Stop and park in a secure area.
- Your hazard lights should be on.
- Apply the wheel wedges and parking brake.
- Take off the wheel cover or hubcap.
- Take off the lug nuts.
- Leverage the Jack to raise your Toyota.
- Take off the lug nuts.
- Take the flat tire off.
On an AWD Highlander, do all four tires need to be replaced?
All vehicles should have their tires changed in sets of four, but all-wheel drive vehicles especially need to do this. To avoid variations in each tire’s outside diameter, all four tires should be the same brand, size, construction, tread depth, and tread design.
How many spare tires does the 2020 Toyota Highlander have?
To its credit, Toyota includes a spare tire with the Toyota Highlander. However, keeping it up is simple to forget.
Maintaining spare tires positioned underneath a car can be challenging. In this example, we’ll use a first-generation Toyota Highlander to show you how to take out, care for, and replace a spare tire. For some other Toyota models and some other makes that tuck the spare up under the back of the car, the process is the same. This narrative serves as a how-to manual for getting the spare tire down if you get a flat and are in immediate need of one.
Opening the cargo compartment and looking under the cargo floor is the first step in finding the spare tire in a Toyota Highlander. You can lower the spare tire using the special tools that are there. Next, set a work mat down. This helps to guarantee the tire has a landing location and keeps you clean. The plastic cover should then be unscrewed when you crawl up underneath the car (never while using a jack).
Return to your standing position at this point, and lower the tire using the small nut with the ring on top. To accomplish this, insert the ring into the nut slot to the right of the cargo area and turn the black wrench tool in the other direction. The spare tire for the Toyota Highlander will gradually descend to the ground.
Crank it down and then some more. After that, remove the tire and position it against the rear bumper upright. If the line you crank-down has enough slack, you can slide the retaining ring through the hole in the centre of the cover and rim. If not, crank again.
How is a spare tire changed?
Tire flat and stuck? Here are the 10 steps to changing a tire.
- Locate a Secure Overpass to Pull Over.
- Use the parking brake and your hazard lights.
- Inspect the materials.
- Your car should be raised off the ground.
- Remove the Tire and the Lug Nuts.
- Fix the spare tire to the vehicle.
- Switch out the lug nuts.
Without a jack, how can a tire be changed?
One person can carry out this tire-changing procedure without the need of a jack, though caution is always advised in case the automobile slides. Drive the vehicle onto a block that is situated on the same side as the flat. As a precaution, make sure the emergency brake is engaged and, if you have wheel chocks, position them behind the other two wheels. In a genuine emergency, dig out the dirt surrounding and beneath the flat tire using a shovel or even your hands. Once you have enough space to change the tire, continue digging. Once more, remove the lug nuts, switch the tires, install the new lug nuts, and then gradually tighten. Until you can drive out of the hole, fill it in. Remove any wheel chocks before releasing the emergency brake. Once all four tires are back on the ground, drive off the block and finish tightening the lug nuts.
Contact a Tire Repair and Replacement Expert in Denver Today
While understanding how to change a tire is essential, being able to do so without a jack might be useful. But calling an emergency roadside repair service for mobile flat tire repair is the best course of action for replacing a flat tire when you don’t have a jack.
Are you able to lift Highlander?
Discover the potential of your Highlander with Torq Engineering’s new 2 “lifting kit The Highlander 2 is raised with this simple to install lift kit “inches maintain the original ride and drive while enabling for wider tires, more ground clearance, and increased performance. fabricated from mild steel measuring 1/4″ and 3/16”.
How much time can you spend using a spare tire?
With a donut-shaped spare tire, you should not travel faster than 50 mph or farther than 50 miles. Long-distance driving with a spare tire could potentially harm the transmission and other components of the car.
A Toyota Highlander can a full-size spare fit underneath?
Question:
Will my 2019 Toyota Highlander still fit a full-size spare tire underneath it once I connect the etrailer Trailer Hitch Receiver – Custom Fit – Matte Black Finish – 2?
Expert Reaction:
After installing the etrailer Trailer Hitch Receiver # e98844, your 2019 Toyota Highlander’s full-size spare tire will still fit as long as it DOES NOT have an aluminum rim.
You will want a new trailer hitch receiver, the Draw-Tite Trailer Hitch Receiver # DT84MR, in order to keep your full-size spare beneath your Highlander if it does have an aluminum rim.
Both upgrades are compatible with hybrid vehicles, and I’ve included links to videos showing how to install each option on a 2019 Highlander below for your viewing pleasure.
I also wanted to highlight that the T-One Vehicle Wiring Harness # 118449 is the right part for your 2019 Highlander if you required to haul a trailer as well as trailer wiring.