I took my wife’s car for the first time in a while a few weeks ago.
I took my wife’s car for the first time in a while a few weeks ago. The steering wheel shook a lot as I used the brakes while traveling at a fast speed. I was aware that the rotors needed to be changed. She drives a 2007 Chevy Malibu with more than 113,000 miles on it, which is far more than the amount of time before a brake replacement is advised.
Brake pad and rotor replacement is a quick and simple DIY project. But it took a lot more time this time. I visited the neighborhood parts store and purchased two front rotors and brake pads. I brought them home, parked her car on jack stands, and began removing the previous tires. Because of the worn brake pads, the rotors were severely damaged. However, they hadn’t yet begun emitting that high-pitched metallic screech that occurs when you brake. I made the decision to rotate the tires while the automobile was supported by supports. What’s this? Even worse were the ones at the back. I visit the parts store once more as a result. Advice: Just go ahead and purchase all four rotors, pads, and the required tools if you decide to wait that long to replace your brake pads. You’ll gain time this way.
I removed the back ones when I got home. I wanted to compress the piston on the back calipers, so I grabbed my C-clamp (one with a straight handle) and twisted it on the first as I slowly moved the handle, which caused the piston to slowly revolve and allow me to step in. Not that horrible. When I got to the right rear, even after removing the brake line and draining the fluid from that caliper, my clamp wouldn’t crush the piston.
I returned to the parts store. I also purchased a one-man bleeder kit, a brake fluid container, and a C-clamp with a “T handle. Thinking there wouldn’t be much fluid left once it ran out, I purchased the tiny bottle of fluid. For the third time, I returned home, squeezed the piston with the 9-inch C-Clamp, and put everything back together. It’s time to take a spin. I drove the car to test the brakes, and everything was flawless. The tiny bottle of liquid, though, wasn’t enough. The brake light failed to turn on. Returning to the parts store I spent $250 on materials and labor for the entire repair, which was considerably less than the $750 my mechanic would have charged me.
In This Article...
What does Toyota charge for rotor replacement?
What is the price of a brake job? For all four brake rotors, a Toyota brake rotor replacement can run from $300 to $750. The labor and parts costs are included in this estimate.
What is the price of replacing the rotors on a Toyota Camry?
A Toyota Camry’s brake pads and rotors typically cost $341 to $400 to replace at the mechanic, but you can save money by doing it yourself.
How much time does changing rotors take?
Consider this: even a skilled automotive technician needs at least an hour to replace the braking rotors and pads on some cars. Brake pad repair could take several hours or longer for a person with little to no skill.
Learning the procedure, assembling the necessary supplies, carefully carrying out each step, and then putting everything back together again might easily take up a half-day of effort that may not be worthwhile in the end.
You might need to start over to fix the issue and correctly install the new brake pads if you complete the procedure only to discover that the brake pedal feels strange or that your brakes have begun to screech or grind. What a pain in the neck!
An easy approach that might ultimately save you time and money is to have a professional do your brake pad repair.
How can I tell if my rotors are damaged?
How to Spot a Bad Rotor (15 Bad Rotor Symptoms)
- the steering wheel vibrates.
- The brake pedal pulses.
- sporadic brake noises
- when applying the brakes, grinding.
- after installing brake pads, screeching.
- Rotors that are not circular.
- scores or deep grooves.
- Rotor cracks.
How durable are Toyota brake rotors?
The answer is very dependent on the circumstances surrounding your daily journey, your driving habits, the kind of rotors you have, and the kind of car you are operating. Depending on the aforementioned variables, Toyota Highlander rotors often need to be replaced every 30,000 to 80,000 miles.
How much should rotor-equipped brake work cost?
It depends; in general, it is not recommended to simply change the brake pads for pads on an old rotor surface. It can be problematic for new pads to work well, cause vibration, or make braking less safe than when new pads and new rotors are used together. As a result, mechanics might also need to take care of the rotors. Compared to only replacing the pads, replacing the brake rotors and calipers is frequently more expensive and difficult.
How much does it cost to replace the brake pads and rotors?
Each rotor might cost anywhere from $30 to $75. For each axle, labor costs between $150 and $200 to replace the rotors and pads. The cost of brake pads and rotors per axle ranges from $250 to $500.
How much ought a complete brake job to run?
There may be a significant price difference depending on the car you drive. According on the materials used in your vehicle’s brake pads, the cost to replace brake pads might range from $150 to $300 per axle on average. The cheapest brake pads are made of organic material.