Put the AST Tools # TOY 640 64mm oil filter in its place.
Since they are both authentic OEM Toyota 04152-YZZA1filters or K&N PS-7020filters, I advise purchasing one of them.
In This Article...
Recommended Oil Change Intervals for Toyota Vehicles
You were supposed to replace your oil every three months or 3,000 miles, whichever came first, according to an old proverb. This is no longer the case, though, as engine technology has developed and become more effective. Toyota advises consumers to have their vehicle’s oil changed professionally or by themselves every six months or five thousand kilometers, whichever comes first.
Recommended Oil Viscosity for Toyota Models
Toyota owners who enjoy DIY projects might be interested in changing their own car’s oil. We endorse this course of action because it offers customers a lot more cost-effective option than even bringing their car to one of the more reasonably priced service facilities nearby. Make sure you are using the right oil if you plan to change your Toyota’s oil on your own. Naturally, as Toyota Genuine Motor Oils are created exclusively for use with Toyota engines, we advise using these. But another choice that is suitable as well is synthetic oil with a viscosity of 5W-30!
Exactly how much oil does a Toyota Highlander require?
These guidelines were developed using an oil change on a 2018 Highlander XLE 3.5L V6. While you can apply the fundamentals to different models and years, you should always reference your owner’s handbook for details particular to your car.
Warm up the engine
Start your engine and let it run for a while in cold weather to thin out the air and improve oil flow. A level space is recommended for parking your Toyota Highlander. Once the engine has warmed up, shut it off.
Drain the old oil
The drain bolt can then be removed by crawling underneath your Highlander. Allow the oil to drain for at least 15 minutes into your drain pan or another suitable container.
To stop leaks, replace the washer in your drain bolt. The oil drain bolt should then be installed once more and tightened.
Remove the filter
A 2018 Toyota Highlander’s oil filter is located underneath the vehicle. Utilizing the Toyota Highlander oil filter wrench, remove the filter housing. Take off the O-rings and old filter from the housing. Verify that the engine surface is free of any adhesion to the filter gasket.
Install the new oil filter
Before installing the replacement filter, clean the engine block of any debris and residue. Place the replacement filter and O-rings inside the housing after lubricating them.
Put new oil in the engine
5.8 quarts of engine oil should be poured into the oil fill hole. Start the engine after replacing the fill cap and making sure it is properly screwed in. Time you let the engine run for a while, look for leaks from the oil filter and drain bolt.
Stop the engine and check the oil level
Stop and wait for three minutes after running the engine for a while. Check the oil level with the dipstick and add extra if necessary.
Dispose of the old oil according to regulations
Never dispose of used oil in the trash or on the ground. The environment could be harmed if this is done. The majority of states require businesses that sell motor oil to accept your used oil, as do service centers and establishments that change oil (like Jiffy Lube). For information on additional locations to recycle your oil, consult the websites of your state or municipal government.
How frequently should I have my Toyota Highlander’s oil changed?
One of the most important and crucial procedures for your car is an oil change. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota suggests changing your 2020 Toyota Highlander’s oil and filter every 3,000 to 5,000 miles.
My 2008 Toyota Highlander may I use synthetic oil?
Wix oil filters offer extended OEM recommendations for your 2008 Toyota Highlander that correspond to the drain intervals of AMSOIL XL synthetic motor oil, which are 12k miles or one year, whichever comes first.
Describe SAE 5w30.
A popular motor oil for light-duty gasoline and diesel engines is 5w30. 5w30 is a multi-grade oil, like the majority of modern motor oils, ranging from a lower viscosity grade of 5 to a higher viscosity grade of 30.
The “W” stands for “winter; the number before it denotes the thickness or viscosity of the oil at low temperatures (thus the “W”); the number following it denotes the thickness or viscosity of the oil at higher temperatures, when the engine is operating.
How is the Toyota Highlander lubricated?
How to Add Oil to a Toyota Highlander LE 3.5L V6 (2014-2019)
- Take off Oil Fill Cap – Remove the oil fill cap.
- Add Oil – Select the proper sort of oil and add it.
- Replace the oil fill cap by placing it back on the engine.
- Additional details about applying oil are available.
Does Toyota use synthetic oil in Highlanders?
Product Features: Mobil 1 Extended Performance full-synthetic motor oil 5W-30 maintains good viscosity and controls oxidation to preserve important engine parts for up to 20,000 miles between oil changes(1).