The metal covering must be removed in order to remove the oil filter housing.
Remove the lid by using your extension (3/8) and ratcheting wrench. Inside the cover, a tiny quantity of oil typically gathers, so be ready with a rag to mop it up to prevent a mess.
I used my MotivX drain tool and screwed it into the filter housing for this step.
Put the tubing into your oil catch pan after that, and then tighten the bottom part of the drain tool. By doing this, the old oil will be able to drain down the tube.
In essence, as the tool is tightened, the apertures on the inside help drain the filter. The ports and holes in the black part of the drain tool are visible above. Really cool!
If you didn’t purchase the MotivX kit, you probably already have a plastic component that resembles the one seen above.
When you insert the plastic tool, place your oil catch pan behind the filter and get ready for the oil to start draining.
In This Article...
Step 5. Replace Filter Medium & Seals
Avoid using anything like a screwdriver to remove the old huge o-ring as you remove and replace it.
Since the housing is made of plastic, you should avoid damaging the threads. What a major headache that will make this comparatively easy task. To help you have the greatest seal possible while reinstalling the new seal, soak it in with oil before you do so.
If you’re anything like me and like to fiddle with things a lot, you can unintentionally disassemble the component that holds the oil filter in place.
Just to be clear, don’t! (lol). It can be difficult to reinstall the aforementioned parts since you have to bend the cylinder’s two outermost tabs in order for it to sit correctly. Then, to make sure the cylinder stays securely in place, you’ll need to bend them back.
If that isn’t sufficient proof that filters should be changed as soon as possible, I don’t know what is!
Step 6. Replace Filter Housing in Reverse Order
This section needs no explanation. Reverse the process you used to remove the housing to reinstall it.
The housing has a tiny metal tab that serves as a stopper in the event that it becomes loose. There’s no need to tamper with it. You only need to screw the housing in to finish. Although Toyota recommends 18 ft/lbs of torque, I still do this by feel.
Step 7. Pour Fresh Oil into Crankcase
The MotivX funnel is visible overhead. The viewing window and the fact that it screws right into the location where the oil cap goes are two of this funnel’s best qualities.
Check your dipstick after adding the oil. Add extra oil until there is oil visible up to the second marker or divot. Reinstall the oil filler neck cap before starting the car. Check for any leaks after letting the truck run for a few minutes. Usually, after the fresh oil has been circulated, you will need to add a little extra to get the right amount for the engine.
Your skid plate needs to be reinstalled, and that’s all! You’ve just finished changing your oil. If it’s your first time, the entire process shouldn’t take more than 4560 minutes. Congrats! Your first oil change has just been completed. Amazing work.
Your maintenance light needs to be reset as the last step. Two strategies exist for doing this.
- To switch to auxiliary power, press the start/stop button twice or, if you have a physical key, turn it.
- Watch for the screen to fill with all of the welcoming messages.
- Set trip A on the odometer.
- To turn off the car, use the start/stop button or turn the key to the off position.
- Start the truck while still depressing the odometer trip button.
- Wait until you observe five dots appear where the odometer typically is, then gradually vanish one by one without releasing the trip button.
- Reset the maintenance light if the odometer flashes 000000. You’re done now!
- Launch the truck.
- Navigate to the settings tab on the primary heads-up display using the directional arrows on the right side of the steering wheel.
- In the setting tab, scroll down until you find the maintenance reset option.
- Enter that menu by clicking it, then select yes to confirm.
- You’re prepared!
Final Thoughts
Finally, you can create another reminder by going to the Maintenance page in the vehicle apps.
That pretty about sums it up. You shouldn’t experience any problems if you follow the step-by-step instructions. You’ll pick up a new skill while also saving some time and money.
Keep in mind that synthetic oil is superior than conventional oil, and routine oil changes are essential to extending the motor’s lifespan.
I enjoy traveling to new and interesting places. Nothing compares to a long day spent hiking and a quiet night spent beneath the stars!
HI! How often should the drive shaft be greased, is it difficult, or need you take it to a shop?
Using a Fumoto valve is something I wouldn’t risk. I’m aware that many people vouch for them, however the OEM screw-in plug is fail-safe unless it is improperly tightened. The Fumoto valve may malfunction or something may clog the lever and cause the valve to open. I’d rather be cautious than sorry, and using an OEM plug will cause less mess than a Fumoto.
How frequently should the oil filter be changed in a Toyota Tacoma?
For standard oil, Toyota advises changing your 2021 Toyota Tacoma’s oil and filter every 3,0005,000 miles. Changing synthetic oil should be done every 7,500 to 10,000 miles. Remember that the easiest way to find out the appropriate intervals for your car is to consult the owner’s manual and your dealer.
How is the oil filter on a Toyota Tacoma loosened?
On the engine’s lower right side is where the oil filter is located. With a wrench, turn the filter in the other direction to remove it. As you crank the wrench in a counterclockwise direction, it automatically tightens around the filter. If removing the filter is challenging, use force.
Without the equipment, how do you take out a Toyota oil filter?
Toyota oil filters can be taken out using one of nearly four different techniques. To complete your necessary task in a specific fashion, you are free to choose any of the approaches.
Using Sandpaper
The Toyota oil filter can be removed at a low cost by using sandpaper. You may easily create a tight grip over the oil filter by wrapping the sandpaper over it. After ensuring that your sandpaper is well wrapped, simply pull it in the other direction. The force generated produced by doing so will enable you to remove the Toyota oil filter without the use of a wrench.
Antique timing belt and key
This article also includes another helpful technique that involves the use of a key and an old timing belt. Use both of your tools to make a lever, place the belt over the oil filter, hold it in place with a key, and then unscrew it.
Screwdriver and hammer
To remove the oil, a screwdriver and sledge can also be useful. Basically, you need to place the screwdriver’s tip on the oil channel and use a sledge to pound the screwdriver’s base into the anti-clock bearing. The Toyota oil filter would be easily removed using the sledge’s energy.
Three legs adaptor
A three-legged adapter is another tool used for this design. This adapter is included in what is most likely the best tool for removing Toyota oil filters. For this reason, we may state that this tool is the least used, but in any case, it might provide you with a better result than a wrench.
As a result, if you’re wondering How to Remove Toyota Oil Filter without Wrench, all of these tools and techniques can be used.
There is yet another approach that can be advantageous for removing the oil filter without a wrench. But before attempting any of the other ways, this one should be tried.
The first method to try
Sometimes oil filters are loosely fastened, and you can even use your hand to access a Toyota oil filter. Give it a shot and attempt to open the oil filter counterclockwise. Maybe it’d be simple to open. You should use safety precautions and attempt it for this reason. To open the Toyota oil filter with your hands, keep in mind that gloves are recommended.
We should understand the importance of changing the oil filter after learning how to completely remove a Toyota oil filter without a wrench.
Importance of changing oil filter
The requirement to remove the oil filter in order to replace it is a fundamental phenomenon. In order to preserve the car’s reputation and keep the engine in good shape, it’s crucial to change the oil filter.
Facts to remember
Everyone should be aware of a few crucial details before attempting to remove the Toyota oil filter, both with and without a tool.
Verify that your car is chilly and that it was not in drive mode prior to two hours of work.
Before attempting to remove the filter, re-oil it since occasionally it won’t unscrew if there isn’t any oil on the filter.
You should also be aware of the proper technique for removing the oil filter with any instrument. It would be more tightened rather than becoming loose if you were to remove it in the wrong way.
When should the oil be changed in a 2017 Toyota Tacoma?
For traditional oil, Toyota suggests changing your 2017 Toyota Tacoma’s oil and filter every 3,000 to 5,000 miles. One of the most important and expensive maintenance for your car is an oil change. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
How long does a Tacoma need between oil changes?
How frequently should a Toyota Tacoma have its oil changed? For traditional oil, Toyota advises changing your Toyota Tacoma’s oil and filter every 3,000 to 5,000 miles. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles. One of the most crucial and important services for your car is an oil change.
Is synthetic oil required for Tacoma?
Your Toyota Tacoma will operate smoothly if you maintain your oil changed on a regular basis and use the right oil. The Toyota Tacoma runs on 0W-20 and 5W-20 oil viscosities. The best engine cleaners minimize sludge buildup and keep your engine operating smoothly for longer.
What type of oil does Toyota suggest for the Tacoma?
High Mileage 0W-20 Full Synthetic Motor Oil, 5 Quart, from Mobil 1. (Part No. 15015) Product attributes: For engines with more than 75,000 miles, Mobil 1 High Mileage full-synthetic motor oil 0W-20 is made to allow up to 10,000 miles between oil changes.
How often should an oil change be performed on a 2017 Toyota Camry?
For traditional oil, Toyota advises changing your 2017 Toyota Camry’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
Do you require a wrench for oil filters?
Apply a thin layer of fresh engine oil to the replacement filter’s gasket before manually threading it on. For ease of turning, some filters include a rubberized surface. With just a few excellent hand tightenings, every quality oil filter is built to maintain its seal for tens of thousands of miles. Unless your filter is one of those deeply recessed models with no room for your hands, you don’t need a wrench. (In that scenario, a cap wrench is the only option.) Turn the filter until the mounting plate of the filter feels barely in touch with the filter base. Then turn the screw a further half turn with the wrench.
If it’s been a long since you’ve purchased engine oil, the options could seem overwhelming. See the section below titled “What’s That Starburst?” for some kind advice.
A stripped-out oil-drain plug hole can be saved using this straightforward rubber plug. To install and remove the rod, insert it.
Can you manually remove an oil filter?
With your filter, you’ll be getting up close and personal. Before beginning, put on your gloves and glasses to protect your hands and eyes.
Jack Your Car
If you are unable to reach the filter with the car at a level angle, jack it up. Keep in mind to use caution when doing this and to position the jack correctly underneath the automobile. Once the car is elevated, the jack should be replaced with jack stands.
Position Yourself Carefully
When you have a wrench, it is simpler to avoid lubrication that is dripping. You don’t receive that advantage using the method we’re looking at. Remember to keep your body and face away from the drip zone.
Place Drainage Pan
As usual, position your drainage pan to catch any dripping oil. If there is a spill, you could simply throw some rags under the pan on the floor to prevent damage.
Grab on
Take a firm hold of the end of the filter with your dominant hand. Try to rotate in a counterclockwise direction. Put all your strength behind it.
If it had previously been hand-screwed on by you or your mechanic, it could be possible to remove it without using any further tools.