How To Change Headlight On Toyota Corolla

With the proper equipment, you can replace your headlights on your own, especially if you’re changing your high-beam lights. It may be simpler and safer to contact an auto body shop to replace your low-beam lights because doing so is significantly more difficult. The following tools are required for a DIY headlight repair on a Toyota Corolla:

a headlight 9005 high-beam bulb
a set of low-beam LED headlights
the screwdriver
socket 10 mm

Changing a high-beam bulb:

Locate the bulb by opening the hood. The headlight assembly should be in front of it.
Pull the lightbulb out by rotating it counterclockwise, pressing the tab on the electrical plug, then turning it clockwise again.
Push the replacement bulb into the housing after inserting it into the electrical plug.
Make sure your headlights are functioning correctly by testing them.

Since your entire light assembly needs to be replaced, replacing your low-beam lights is much trickier. To replace them, you’ll have to take the car’s grill and light assembly off. Once more, it is strongly advised to get your low beams changed at an auto body shop.

While hunting for new insurance shouldn’t take as much time as replacing your headlights, it often does. Your insurance should occasionally be updated and changed, just like old lightbulbs. Use the Jerry app to quickly locate and compare rates and plans from leading insurers.

In This Article...

How is the bulb removed from a Toyota Corolla?

Headlight Bulb in Step 1. To open the hood, find the handle.
Pull the latch up by reaching beneath the hood at the front where there is a tiny notch.
Find the lightbulb.
Assembly should be twisted 45 degrees counterclockwise and pulled out straight.
Pull while lifting the lock up.
Repeat steps 3-5 to remove the other bulb after you’ve located it.

Describe an HIR2 bulb.

CI1255 HIR2 halogen bulbs are frequently found on Lexus and Toyota automobiles. The UV-reduced HELLA halogen automobile bulbs are secure for use in contemporary headlamps with polycarbonate lenses.

What distinguishes high beam from low beam?

Headlights are frequently regarded as a design feature since they may give an automobile a unique appearance. But keep in mind that the purpose of headlights is not to enhance the appearance of your vehicle. Exterior lights illuminate the roadway in front of you, allowing other motorists and pedestrians to see you as well as where you’re going.

SHINING A LIGHT ON AN IMPORTANT SAFETY FEATURE

Driving in the dark has been a concern for people for as long as they have been using automobiles. That doesn’t necessarily imply driving at night. Even during the day, weather conditions have the potential to make the sky exceedingly black, and as a result, the streets. Headlights are especially important for drivers in rural locations where there may not be many streetlights.

IMPROVING A BRIGHT IDEA

Headlamps fueled with gas were once a standard feature on all vehicles. Then, the auto industry developed technologically.

Halogen headlights outperform gas-filled headlamps in terms of brightness, durability, and heat resistance.
LED headlights use less power and generate an even brighter light than halogens.
The brightest lights on the market are HID headlights. Before you conclude that brighter is better and switch to HIDs, bear in mind that certain jurisdictions deem them to be too bright.

Let’s now examine the use of high beam vs. low beam and when to keep to low beams.

HIGH BEAM VS. LOW BEAMOPERATIONALLY

The low beams are activated when you turn on your headlights. Simple enough, yes? Older cars generally had a foot switch on the floor to the left of the brake/clutch pedal that was used to turn on the high lights. The high beam control is located on the turn signal lever on more recent automobiles.

HIGH BEAM VS. LOW BEAMREACH AND INTENSITY

Low beams have a lower intensity and cover less ground in front of your vehicle. High beams have a high intensity and cover more ground.

WHEN TO USE HIGH BEAMS

When more light is required (for instance, when driving on a rural road without any streetlights), switch to high beams.
When driving in fog, use high beams with caution as the harsh light may be reflected back to the driver and obstruct vision. Because of this, some automobiles have distinctive fog lights.
Of alert other cars to a hazard (such as a tree that has fallen in the road), flash your high lights. Please be aware that depending on the state, county, or city, utilizing and flashing high lights may not be permitted.

Jiffy Lube takes extra care of your headlights because they look out for you. Every oil change provided by Jiffy Lube Signature Service includes a thorough examination of all exterior lights. They will be checked for proper operation by a skilled technician. If an issue is found, additional diagnostics will be carried out. Your headlights will be meticulously cleaned with specialized solvents before you go on your way.