How To Change Headlight Bulb On 2013 Toyota Corolla

The Strong Beam

In This Article...

On a Toyota Corolla, how do you swap out the low beam headlight?

With the proper equipment, you can replace your headlights on your own, especially if you’re changing your high-beam lights. It may be simpler and safer to contact an auto body shop to replace your low-beam lights because doing so is significantly more difficult. The following tools are required for a DIY headlight repair on a Toyota Corolla:

a headlight 9005 high-beam bulb
a set of low-beam LED headlights
the screwdriver (low-beam bulb only)
socket 10 mm (low-beam bulb only)

Changing a high-beam bulb:

Locate the bulb by opening the hood. The headlight assembly should be in front of it.
Pull the lightbulb out by rotating it counterclockwise, pressing the tab on the electrical plug, then turning it clockwise again.
Push the replacement bulb into the housing after inserting it into the electrical plug.
Make sure your headlights are functioning correctly by testing them.

Since your entire light assembly needs to be replaced, replacing your low-beam lights is much trickier. To replace them, you’ll have to take the car’s grill and light assembly off. Once more, it is strongly advised to get your low beams changed at an auto body shop.

While hunting for new insurance shouldn’t take as much time as replacing your headlights, it often does. Your insurance should occasionally be updated and changed, just like old lightbulbs. Use the Jerry app to quickly locate and compare rates and plans from leading insurers.

What distinguishes high beam from low beam?

Headlights are frequently regarded as a design feature since they may give an automobile a unique appearance. But keep in mind that the purpose of headlights is not to enhance the appearance of your vehicle. Exterior lights illuminate the roadway in front of you, allowing other motorists and pedestrians to see you as well as where you’re going.

SHINING A LIGHT ON AN IMPORTANT SAFETY FEATURE

Driving in the dark has been a concern for people for as long as they have been using automobiles. That doesn’t necessarily imply driving at night. Even during the day, weather conditions have the potential to make the sky exceedingly black, and as a result, the streets. Headlights are especially important for drivers in rural locations where there may not be many streetlights.

IMPROVING A BRIGHT IDEA

Headlamps fueled with gas were once a standard feature on all vehicles. Then, the auto industry developed technologically.

Halogen headlights outperform gas-filled headlamps in terms of brightness, durability, and heat resistance.
LED headlights use less power and generate an even brighter light than halogens.
The brightest lights on the market are HID headlights. Before you conclude that brighter is better and switch to HIDs, bear in mind that certain jurisdictions deem them to be too bright (each state has its own laws governing headlights)

Let’s now examine the use of high beam vs. low beam and when to keep to low beams.

HIGH BEAM VS. LOW BEAMOPERATIONALLY

The low beams are activated when you turn on your headlights. Simple enough, yes? Older cars generally had a foot switch on the floor to the left of the brake/clutch pedal that was used to turn on the high lights. The high beam control is located on the turn signal lever on more recent automobiles.

HIGH BEAM VS. LOW BEAMREACH AND INTENSITY

Low beams have a lower intensity and cover less ground in front of your vehicle. High beams have a high intensity and cover more ground.

WHEN TO USE HIGH BEAMS

When more light is required (for instance, when driving on a rural road without any streetlights), switch to high beams.
When driving in fog, use high beams with caution as the harsh light may be reflected back to the driver and obstruct vision. Because of this, some automobiles have distinctive fog lights.
Of alert other cars to a hazard (such as a tree that has fallen in the road), flash your high lights. Please be aware that depending on the state, county, or city, utilizing and flashing high lights may not be permitted.

Jiffy Lube takes extra care of your headlights because they look out for you. Every oil change provided by Jiffy Lube Signature Service includes a thorough examination of all exterior lights. They will be checked for proper operation by a skilled technician. If an issue is found, additional diagnostics will be carried out (with your permission). Your headlights will be meticulously cleaned with specialized solvents before you go on your way.

Describe an HIR2 bulb.

CI1255 HIR2 halogen bulbs are frequently found on Lexus and Toyota automobiles. The UV-reduced HELLA halogen automobile bulbs are secure for use in contemporary headlamps with polycarbonate lenses.

Do LED headlights outperform halogen ones?

driving a vehicle? If you’ve ever taken a short or long trip by car, you’ve probably noticed that different vehicles have different bulbs. Halogen and LED headlight bulbs are two of the most popular types used in cars today. Which of these is different? Is one kind superior than the other?

Halogen Bulbs Pros and Cons

Halogen headlights are the most typical headlights seen nowadays and may be found in both new and old cars. An incandescent light that uses halogen gas is known as a halogen bulb. Vehicles that use halogen bulbs have headlights that are yellow in color.

What benefits and drawbacks come with halogen bulbs? Halogen bulbs are less expensive to replace than LED bulbs if you’re on a tight budget. Additionally, the yellow light is softer and less likely to readily blind other motorists. What are the disadvantages of halogen lamps then? It all comes down to how much energy is used. A halogen bulb gets hot to the touch when it is operating. These bulbs waste energy since they use more to produce the same amount of heat that they produce.

LED Bulb Pros and Cons

In many ways, LED bulbs are the antithesis of halogen bulbs. White light from LEDs is brighter than typical halogen lights. This looks much cooler and makes it easier to see around corners. LEDs are also much more efficient than halogen lamps. While halogens produce a lot of heat, LEDs produce far less heat, which contributes to energy savings. An LED bulb should live longer than a halogen bulb because it uses less energy. These benefits have led to an increase in the popularity of LED bulbs among motorists. LEDs are now available as standard or optional equipment with the majority of contemporary automobiles.

On the other hand, LEDs cost more to fix. Additionally, replacing an LED is far more difficult than replacing a halogen bulb, necessitating the assistance of a professional for more drivers. Additionally, LEDs can be harsher on other drivers’ eyes when driving at night because of how bright they are.

Can low beam bulbs be used in high beams?

All cars used to have separate high beam and low beam bulbs in the past. That’s not the situation today. The majority of contemporary automobiles use a single bulb with two filaments. Both the low beams and the high beams have their own. That, however, is not universally true.

Some cars do have separate bulbs for their high and low beams (usually higher-end or performance cars). Typically, you’ll have a HID bulb for your high beams and a regular halogen bulb for your low beams. They cannot be used interchangeably. Both call need a distinct bulb (HID bulbs are significantly more expensive than halogen bulbs, as well).

You might also have LED bulbs depending on the particular vehicle.

Some automakers employ them as turn signals and parking lights, while others are starting to use them as headlights (these are still rare, although there are aftermarket LED kits available).

Therefore, the answer to whether high beams need separate bulbs or not is: it depends. Examine the front of your vehicle. There are high and low beams likely to be separate if there are four headlight elements (two on each side). Your car uses a dual filament bulb to power both the high and low beams if it only has two headlight elementsone on each side.

Does the same bulb power both high and low beams?

So, are the bulbs used for high and low beam headlights different? The sort of headlight bulb in your car will determine everything. Some lamps include high and low beam options. Other automobiles alternate between two different lamps.

Is the H11 bulb a low or high beam?

You would also like to know about the distinctions between each type of headlight bulb in addition to the advantages and disadvantages listed above. In that scenario, you can make use of the following comparison chart to compare 9005, 9006, and H11 bulbs:

Wattage

The power consumption of your bulbs will be determined by their wattage, thus it’s crucial to check this to make sure a certain headlight bulb is compatible with your car. While some bulbs may have a greater 65 watt rating, more efficient models may only have a 55 watt rating, making them a more flexible choice.

Lumen

You may check the lumen rating to find out the precise brightness that your headlight bulbs can produce if you want to know about the specific performance that you can anticipate from them in terms of their light output. This lumen rating can range from 1000 to 1700 lumens, with the higher rating producing significantly superior performance.

Lifespan

You would want your headlight bulbs to last as long as feasible in addition to purchasing high-performance light bulbs. Checking the lifespan rating of the light bulbs you are using is very vital in order to validate the same. For your peace of mind, these LED bulbs typically have a lifespan value of 30000 hours or even 50000 hours.

Beam Type

There are typically two types of light beamslow beam and high beamto choose from in a vehicle’s headlight. Only the 9005 bulb is designed for high beam headlights, while the 9006 and H11 bulb is used for low beam headlights.