On a Toyota Camry, replacing a tail light is simple, quick, and doesn’t require any special tools. Important safety elements like tail lights and brake lights let cars behind you see you and understand when you are stopping or turning. They must therefore be maintained as a result. Take a few minutes to replace your tail lights’ burned-out bulbs if necessary. Replacement bulbs are available at the Toyota dealership or at any car parts store.
In This Article...
Step 1
Locate the tail light assembly covers to the right and left of the trunk lid when you open the Camry’s trunk. Plastic and a rectangular form define the cover. It hinges to the outside edge and snaps open on the inside edge.
Step 2
Locate the light bulb sockets inside by opening the tail light assembly cover. Turn the socket counterclockwise to release it from the assembly, then remove the socket that goes with the damaged light. The turn signal is located in the top bulb, the stop light is in the second, the running light is in the third, and the backup light is in the final bulb.
Step 3
Straighten out the socket and remove it from the assembly. Take the lightbulb out of the socket. Straight out of the socket, the bulb can be thrown away. A new bulb should be inserted and pushed in until it is completely seated in the socket.
Step 4
Turn the socket clockwise until it stops, securing it in place, then insert the socket and bulb into the tail light assembly. Make sure the cover snaps shut to ensure security as you seal it. This will assist in preventing moisture and debris from entering the tail light assembly.
Ensure the lights are operational before closing the trunk. Before testing the lights, you must repeat the procedure on the opposite tail light if both of your lights are out.
Does a Toyota Camry’s brake light bulb swap out easily?
Because they don’t interfere with your vision, it’s understandable why so many burned-out taillights go unseen and unaltered. However, having a burned-out taillight makes it harder for people to see you! This can be quite problematic while driving at night because it might be difficult for people to see you when they are driving behind you when you brake or are on a road with few lights!
Fortunately, if you do find your taillight is broken, you can fix it quickly and easily. Because Toyota cars are designed to be simple for any driver to operate, changing a taillight in a Toyota Camry can be done in just 5 simple steps:
Usually, if both of your tail lights go out at once, you need to change your fuse. To identify the fuse, see your owner’s manual. If the metal component within the taillight fuse is whole, the fuse is still good; however, if the metal appears to be broken, the fuse has blown and has to be replaced.
Any auto shop and several department stores in Brampton, Ontario, will have standard tail lights for your automobile, including taillights for a Toyota Camry. To determine the size or type of light to purchase, a guide is typically provided.
In most cases, a screwdriver will be sufficient to accomplish this, but if there aren’t any screws, you might need to open the trunk to gain access to the lights. It’s time to change the bulb once you remove the covers or can see the lights.
Replace the fuse if that was the problem, then try turning on your lights again.
Like other light bulbs, the bulbs are replaceable by unscrewing them. Be careful when screwing in the replacement bulb because they are still fragile.
It’s time to put everything back together the same way you pulled it apart after changing the bulb so you can check your work!
How much is a bulb for a rear brake light?
Anyone can learn how to replace a broken brake light. A replacement bulb costs approximately $10, and doing it yourself will save you about $20 in labor costs as well as the time it would take to drive to the shop and wait for the work to be completed.
How can a brake light be changed?
Replacing a Tail Light
- Step 1: Open the tailgate or trunk.
- Step 2: Remove the tail lamp assembly (if needed)
- Step 3: Remove the bulb.
- Step 4: Insert a replacement bulb after adding bulb grease.
- Step 5: Reattach the component (if needed)
- Repeat step 6 on the opposite side.
Why is my Toyota Camry’s brake light on?
Braking System Alert Light indicates that the brake system is broken or that the brake fluid level is low. Additionally, when the parking brake is not released, this light illuminates. If the parking brake is fully released and the light goes out, the system is in good working order.
AutoZone does it replace brake lights?
Problems with the brake light switch or turn signals A replacement switch can be placed after you check the connection to the switch for corrosion or other problems and buy it at your neighborhood AutoZone.
How frequently do brake lights fail?
Driving on congested roads requires that your car’s lights function properly. The risk of an accident can be reduced by ensuring that other drivers can see you and what you are doing. The majority of accidents on the road today are caused by problems with braking. Your car’s brake light bulbs assist in warning other nearby vehicles when you are applying the brakes. You can stop people from bumping into you by giving them this kind of advance notice. Your car’s brake lights only illuminate when you depress the brake pedal.
Depending on the make and model, your car may have fewer or more brake light bulbs. The possibility of moisture entering the brake light bulb’s casing might be highly troublesome. You can lessen the number of repairs you need to make by making sure the housing your bulbs are in is airtight and leak-free. A bulb will typically survive for about a year until the filament inside of it breaks. Many of the bulbs on the market make the claim that they have a longer lifespan. It will take some study to choose the best replacement bulb, but the effort will be worthwhile.
Driving without functioning brake light bulbs is risky and may result in a traffic penalty. You will be able to identify and address any problems with your car’s lighting by regularly checking all of the lights. Here are some of the warning symptoms that you can experience if your brake light bulb is failing.
- The light occasionally turns on.
- The instrument cluster’s light bulb caution light is on.
- The light won’t function at all.
Numerous issues may arise if brake lights are not functional for an extended period of time. A skilled mechanic can replace the brake light bulb right away if you are unsure how to change the bad brake light bulb.
How long do tail lights last?
Incandescent tail light bulbs, for example, have a lifespan of up to five or six years. However, the lifespan of an LED bulb is typically 12 years.
How long does it take to replace a car’s tail lights?
It might take an hour or two if you are inexperienced and not particularly skilled at managing such duties, but never longer. You will discover that it is a really straightforward task and shouldn’t take more than 30 minutes once you become comfortable with the procedure.
This brings us to the end of our tutorial on changing a car’s tail lights. To replace them, you must first spend money on high-quality tail lights and then carefully follow the instructions. As an alternative, you could decide to get it done at an auto repair facility. For a safe driving experience, be sure to always maintain your car’s tail lights and keep an eye out for other automobile safety features.