A standard door key or a smart key can be used to open a Toyota Camry. The key fob, often known as a smart key, is used to operate and unlock the car using keyless entry. A battery and a small circuit board are both inside the key fob. The battery needs to be changed sometimes for the key fob to operate correctly. Although the procedure is simple and should be doable by you, your Toyota dealer can change the battery for you. According to the Lean Crew website, Radio Shack additionally sells fob batteries in addition to the dealer.
In This Article...
Step 1
firmly grasp the Toyota Camry key fob. According to the Lean Crew website, the fob can be unlocked using either the point of the standard key or a flat-head screwdriver. When the two sides of the fob separate, carefully twist the screwdriver or key into the seam of the fob.
Step 2
To gently remove the circuit board out of the fob case, use the screwdriver or key. Adhesive tape is used to secure the circuit board so that it won’t accidentally slip out. Turn the circuit board over once it has been taken out to reveal the battery.
Step 4
According to the graphic on the inside of the key fob, insert the fresh battery into the device. It won’t operate unless the battery is properly fitted. To hold the new battery in place, position the three supports.
Replace the circuit board in the key fob by flipping it over and inserting it firmly. Align the key fob’s two sides, then push firmly until they connect. Test the key fob to make sure the new battery is functioning after securing it.
What kind of battery powers a key fob for a Toyota Camry?
A CR2032 battery, which you can get in shops and online, is used by the majority of Toyota models. These batteries are really inexpensive, usually costing less than $5. Replace the battery in your Toyota key fob within the casing, then cap it off.
What should I do if the battery in my Toyota key is low?
How to Replace the Battery in a Toyota Key Fob.
- Take the key out of the fob. Over the key portion of your key fob is a tiny metal button.
- Unlock the fob.
- Dispense with the green circuit board.
- Switch out the battery.
- Place the key inside the fob after putting the fob back together.
How long does the battery in a Toyota key fob last?
When your Toyota key fob’s battery is running lowthe typical battery life is one to two yearsan alert will sound when the engine is turned off.
What kind of battery is needed for a 2017 Toyota Camry key fob?
A CR2032 battery is typically available at big box stores and hardware stores in Watsonville. Most places have prices that are under $5. Replace the Toyota key fob batteries, then put it in the case and snap the key fob shut. Test your key fob after changing the battery.