This
help owners of the Toyota Camry sedan XV40 sixth generation (2007, 2008, 2009, 2010 & 2011).
In This Article...
What type of battery is required for a 2007 Toyota Camry key fob?
For Toyota Camry vehicles made from 2007 to 2018, this Toyota Key Fob Battery Replacement is the genuine alternative. For vehicle fitment, please refer to the list below. Replace the original battery from your key fob, keyless entry remote, or remote key with this Energizer CR2016 3v Lithium Battery. The highest quality components are used to create Energizer key fob battery replacements, giving you a battery that lasts forever. Make that the previous battery in your car’s remote key or key fob has a 2016 number. The battery number for your key fob, keyless entry remote, or remote key can typically be found on the back cover if it is not in your remote. The reason why Energizer key fob replacement batteries are superior to original equipment batteries is because manufacturers frequently employ lower-quality products or batteries to cut costs and entice you back into the service department where they can profit more from you, the customer.
All Energizer batteries have a long lifespan and are constructed using the best components available. The dependable power you have come to expect from major international brands like Energizer is provided by these specific application batteries. Since Energizer is the most popular battery among automotive car audio specialists, you can be confident that it is a battery you can rely on.
- 10 years of storage guarantee.
- superior lithium
- three levels of corrosion defense
- IEC: D2032
- 3.0 Volt
- Size: 2 x 20 x 20 (mm).
- 220 mAh
Numerous Toyota vehicle models can use the Energizer Key Fob CR2032 battery. the list of Toyota vehicles that this key fob battery fits is as follows:
Fits the following vehicles:
models of the Camry from 2007 to 2018
NoteThis is the proper battery if you have any other Toyota model vehicle with 2016 on the back of the remote.
The 2032 battery is typically used in Toyota vehicles from 2012 and up with smart key fobs.
The number is stamped on the battery of your key fob, so if you’re not sure for sure, just open it with a small screwdriver.
For the Keyless Entry Remote/Keyfob on your Toyota, these batteries are the ideal OEM replacement. The Battery that never stops working. Avoid being shut out by choosing inferior, less expensive brands!
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
What sort of battery is needed for a Toyota Camry key fob?
A CR2032 battery, which you can get in shops and online, is used by the majority of Toyota models. These batteries are really inexpensive, usually costing less than $5. Replace the battery in your Toyota key fob within the casing, then cap it off.
How is a key fob for a 2007 Toyota Camry programmed?
- Open the driver’s side door while seated in the driver’s seat. Lock all further doors.
- Start by turning off the ignition.
- Insert and withdraw the key from the ignition twice within five seconds without turning it.
- Close and reopen the driver’s side door twice in 40 seconds. Insert and remove the key without turning the ignition.
- Close then reopen the driver’s side door twice in 40 seconds, then put the key in the ignition and leave it there.
- The driver’s side door should be shut, and the ignition should be turned on, then off, without starting the car. The ignition key should be removed.
- The doors should automatically lock and then unlock after three seconds to signal that you are in programming mode. If not, repeat steps 1 through 6 until it is.
- Press and hold the new key fobs lock and unlock buttons simultaneously for 2 seconds within 40 seconds after beginning programming mode. Release.
- For 2 seconds, press and hold the lock button. To demonstrate that the key was successfully programmed, the doors should automatically lock and unlock.
- The key was not successfully programmed if the doors lock and unlock twice, so you must repeat the previous two stages.
- To escape programming mode, open the driver’s side door. Test your new key after that!
Finally, Jerry, a free insurance comparison software that shops for the best deals with more than 50 different insurance companies, can help you save money on your auto insurance if you want to recover the cost of a new key.
How long does the battery in a Toyota Camry last?
Batteries for 2020 Toyota Camry models typically last 3-5 years, however this might vary based on the battery’s kind, the weather, the driver’s behavior, and other factors. Your 2020 Toyota Camry should be started frequently to extend the life of the battery.
Replace the batteries inside the key fobs
If you haven’t changed the battery in the key fob(s) in a while, do so now before continuing. When you try to reprogram a key fob with a defective battery, it can be a real pain. The batteries are often inexpensive and simple to replace. If you are unsure how to change them, consult your owner’s manual.
Get inside the car
With your car keys and the remote in hand, go in the driver’s seat and lock all the doors. Closing the doors is crucial because if you leave one open, it can disrupt the procedure.
Turn on the ignition
Once seated, turn the key to the “On” position in the ignition to turn the electrical systems on. Do not start the engine and double-check that the ignition is not in the radio mode.
Press the lock button on the remote key
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position. This notifies your electronic control units that the signal is coming from your key in the ignition and does save the info later. How to Start & Unlock a Car With a Dead Key Fob
Listen for a Lock Sound
You will hear the lock sound once you have completed the aforementioned steps. You have now accessed the programming mode, as indicated by this. Press the lock button once more in the following five seconds to complete the programming.
Programming additional remotes
You will hear the lock sound after repeating the aforementioned procedure. You have now entered programming mode, as this implies. The programming will be successful if you do this and then push the lock button one more in the next five seconds.
Step out from your car and test the result
Close all doors as you exit the vehicle and take your key fobs with you. Test the functionality of both unlocks with each of your key fobs that were programmed.
How do I find out which battery my key fob uses?
Open your fob to find the battery your automobile key fob uses. There will probably be an engraving that starts with CR followed by a string of digits if the item contains a battery. Check your owner’s manual or search online for your car’s make, model, and year without a battery or engraving.
Will changing the battery on my key fob make it work again?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. A key fob replacement or even automobile door lock repair may be necessary if it stops operating after a battery change.
How do I know if changing my key fob battery will fix my car key?
When the key does not function under any conditions, it is likely that the car key fob has a dead battery. On all door locks, all buttons have the same lack of effectiveness. When buttons are pressed, no lights illuminate, suggesting that no signal was transmitted. The backup fob, however, functions flawlessly.
What do I do if my key fob is not working after a battery change?
Before you replace the automobile remotes if your key fob still won’t work after a battery change, make sure your locks are operating properly. Additionally, make sure you didn’t unintentionally deprogram your keychain.
Can you fix a key fob not working after a battery change?
Although replacing the remote’s batteries might be the quickest repair for the problem, this is by no means your only option. Check to see if the key fob or the vehicle is the root of your issue. After determining the root cause, correct or change the damaged components.
What should I do if the battery in my Toyota key is low?
How to Replace the Battery in a Toyota Key Fob.
- Take the key out of the fob. Over the key portion of your key fob is a tiny metal button.
- Unlock the fob.
- Dispense with the green circuit board.
- Switch out the battery.
- Place the key inside the fob after putting the fob back together.
How long does the battery in a Toyota key fob last?
When your Toyota key fob’s battery is running lowthe typical battery life is one to two yearsan alert will sound when the engine is turned off.
Can I set up my own key fob program?
Many automakers have started designing vehicles with locks that can be unlocked with little more than a key fob since the development of remote technology. The owner of a key fob can easily unlock a door by pressing a button, and many of them can also start their car by pressing a button as long as the fob is inside.
Unfortunately, the dealership may assert that they have property rights over the device and, as a result, only they can make a copy and program it, which comes with an outrageous charge, if a car owner loses their key fob or wishes to make an extra copy. However, while making a new key fob and programming it to function with your automobile may require expert guidance, a knowledgeable locksmith may help you with this task without forcing you to go back to the dealership for assistance.
Wait, is it illegal to create a new key fob without the dealer’s consent?
Some dealers can even claim that if the task is not carried out by a licensed operator, making a new key fob is illegal. However, even if this might be the case with a leased or rented car, you are probably allowed to create as many copies as you want with the assistance of a professional.
Additionally, programming a key fob to work with your car is also not a difficult process. While you shouldn’t attempt to manufacture a copy yourself, a skilled locksmith can provide you with a new key fob quickly.