Your Highlander Already Has the Tools
- First, find a safe place and turn on the emergency lights.
- 2. Take off the hubcap.
- Step 3: Insert the Jack, loosen the lug nuts, and raise the Highlander.
- Remove the lug nuts in Step 4 and mount the spare.
- 5. Tighten the lug nuts, then lower them and tighten them once more.
In This Article...
Is a spare tire available for a Toyota Highlander?
Depending on the precise type of tires you require and the store where you buy them, the cost of a spare tire for a Toyota Highlander should range from $150 to $350.
Near the back bumper, at the bottom of the vehicle’s structure, is a spare wheel for a Toyota Highlander. You must take off the trunk’s plastic side panel in order to get to it.
A Toyota Highlander’s spare tire is taken out through the trunk. To unlock the tire from the frame, just remove the side panel of the trunk and use the wrench and key.
How is a spare tire changed on a Toyota?
How to Change a Flat Tire Guide
- Stop and park in a secure area.
- Your hazard lights should be on.
- Apply the wheel wedges and parking brake.
- Take off the wheel cover or hubcap.
- Take off the lug nuts.
- Leverage the Jack to raise your Toyota.
- Take off the lug nuts.
- Take the flat tire off.
Is there a spare tire on the 2019 Toyota Highlander?
To its credit, Toyota includes a spare tire with the Toyota Highlander. However, keeping it up is simple to forget.
Maintaining spare tires positioned underneath a car can be challenging. In this example, we’ll use a first-generation Toyota Highlander to show you how to take out, care for, and replace a spare tire. For some other Toyota models and some other makes that tuck the spare up under the back of the car, the process is the same. This narrative serves as a how-to manual for getting the spare tire down if you get a flat and are in immediate need of one.
Opening the cargo compartment and looking under the cargo floor is the first step in finding the spare tire in a Toyota Highlander. You can lower the spare tire using the special tools that are there. Next, set a work mat down. This helps to guarantee the tire has a landing location and keeps you clean. The plastic cover should then be unscrewed when you crawl up underneath the car (never while using a jack).
Return to your standing position at this point, and lower the tire using the small nut with the ring on top. To accomplish this, insert the ring into the nut slot to the right of the cargo area and turn the black wrench tool in the other direction. The spare tire for the Toyota Highlander will gradually descend to the ground.
Crank it down and then some more. After that, remove the tire and position it against the rear bumper upright. If the line you crank-down has enough slack, you can slide the retaining ring through the hole in the centre of the cover and rim. If not, crank again.
For beginners, how do you change a tire?
I’ve listed the 10 easy steps for changing a tire below.
- Locate a Secure Overpass to Pull Over.
- Use the parking brake and your hazard lights.
- Inspect the materials.
- Your car should be raised off the ground.
- Remove the Tire and the Lug Nuts.
- Fix the spare tire to the vehicle.
- Switch out the lug nuts.
If you have a flat tire and no spare, what should you do?
You might be in for a surprise the next time you need to change a tire if you haven’t bought a new car in a few years. The spare tire has been omitted from most new cars for the past four years or so by the majority of automakers.
“Gene Petersen, tire program manager for Consumer Reports, claims that the transition has been gradual and incremental. ” A few years ago, we first observed it in a couple of the automobiles we’d examine, and we noted that automakers were starting to do away with the spare tire.
Not everyone carries a spare tire in their car. But that doesn’t necessarily imply you’re stranded. When you have a flat tire and no spare, follow these easy instructions:
When changing tires, should the automobile be in neutral?
If an issue were to arise with one of your car’s current tyres, you might find yourself needing to change a tire.
If you follow the correct technique while changing a tire, even if you’ve never done it before, you should be fine. You can learn more about what to do in our changing a tyre tutorial here.
Here, we’ll concentrate on common errors that a novice tire changer could make and explain why you should steer clear of them.
DON’T change a tyre at the side of the road
The greatest places to change tires are places that are far away from the road. You’d be better off calling a breakdown service if you discover that a tire suddenly requires replacing while travelling on the road and you can’t safely stop your car somewhere away from the road.
It is challenging to do a tire replacement right alongside the road because you need a decent bit of space to do so securely and properly. Not to mention that you would be unnecessarily endangering yourself and other road users. Another major no-no is changing tires on the hard shoulder of a highway.
DON’T change a tyre on loose or uneven ground
If you’re going to change a tire on your car, you should do it where the ground is level and smooth.
It’s not a good idea to try changing a tire on a gravelly or grassy surface because it’s harder to work on and there’s a chance that equipment, like the jack, could slip while being used.
DON’T have any passengers in the car
Imagine that you had to change a car tire on short notice and that you were able to locate a location that would be adequate for the task. Before you start changing the tire, make sure all of your passengers, including any animals, have exited the car. Make sure they travel somewhere safe that is not near a vehicle or a busy road.
A person moving around inside the vehicle while changing a tire adds extra weight that could be obstructive and will just make the task more difficult than it needs to be.
DON’T do any checks or work under your vehicle while it’s raised on a jack
To prepare your automobile for a tire replacement properly, you’ll need a car jack. However, using this tool to perform lengthy work below your car is not recommended.
Therefore, resist the urge to even glance below your car while changing a tire, even if there is something else about the automobile you want to inspect.
You need the proper tools to perform any type of maintenance on your automobile that involves spending time underneath it, or you can get it serviced. Working underneath your car is not secure enough with only a car jack.
DON’T use the jack anywhere you’re not supposed to
A car jack should only be used on particular parts of an automobile. When replacing a tire, you should position the jack at the suggested lifting point near the removed wheel.
If you don’t install the jack correctly, you risk damaging your car’s undercarriage and risk having an accident since the jack may not support the car securely. To determine the proper lifting points, see the owner’s manual for your car.
If you don’t have the owner’s manual handy for whatever reason, you can look for information online or get support from your automobile manufacturer’s customer care.
DON’T leave the car in neutral
It’s crucial to remember to leave the vehicle in the proper gear when changing a tire on a manual transmission vehicle. Naturally, you should turn off the engine before beginning the tire change. However, you should leave the gearstick in either first or reverse.
The handbrake only works on two wheels, often the rear wheels, which is why you want to do this. With the engine turned off, shifting into first or reverse causes the front wheels, which are typically the driven wheels, to lock.
If your vehicle has an automatic transmission, you may leave it in the “Park” or “P” position.
What happens if you misplace the key to the wheel lock?
You’ve searched all over but can’t locate your locking wheel nut key. If it’s indeed gone, you have the following choices.
Option 1. Purchase a new key
Even if it occasionally costs more, this is the choice that is easiest to choose. However, you’ll need to purchase a new locking wheel nut key if you want to use the original locking wheel nut set.
Each key has a code that allows you to order an extra from the car’s maker. The only location to find this code is on the plastic storage bag or locking wheel nut storage box, which is a problem if both are missing.
Option 2. Locking wheel nut removal & replacement
Many clients who have misplaced their locking wheel nut keys request that our technicians remove them and replace them with a universal locking wheel nut set. These sets are made to fit a variety of automobiles so you won’t have to buy from the car maker, but they will still secure your alloy wheels. This choice frequently costs less than buying a new key.
Removing locking wheel nuts without a key
Without the proper key, our experts utilize a specialized tool to release the locking wheel nuts. On the majority of automobiles, this technique works well, although it is subject to variables like wheel design and whether the wheel nuts were overtightened before removal. However, our specialists can usually safely remove the wheel nuts.
Where is the key for my locking wheel nut?
If you can honestly say that you haven’t used your locking wheel nut key in the period you’ve owned your car, the odds are that’s where the car’s maker kept it. This indicates that it might be anywhere:
- The locking wheel nut key is frequently kept in the glove box of vehicles, so it makes sense to look there first.
- With regard to your spare wheel, you probably already know that, if your automobile has one, it is housed under the bottom panel of the boot. Make sure to look here because many automakers will keep the wheel nut key in a box near to the spare wheel.
- Storage in the boot: A few manufacturers place the wheel nut key in a panel on either side of the boot. This may be where it is if your automobile has these storage panels.
- If you’ve already looked elsewhere, check in or under the seats because the set might have slid under there during transit. This applies to both the driver’s and passenger’s seat pockets.
Without a jack, how can a tire be changed?
One person can carry out this tire-changing procedure without the need of a jack, though caution is always advised in case the automobile slides. Drive the vehicle onto a block that is situated on the same side as the flat. As a precaution, make sure the emergency brake is engaged and, if you have wheel chocks, position them behind the other two wheels. In a genuine emergency, dig out the dirt surrounding and beneath the flat tire using a shovel or even your hands. Once you have enough space to change the tire, continue digging. Once more, remove the lug nuts, switch the tires, install the new lug nuts, and then gradually tighten. Until you can drive out of the hole, fill it in. Remove any wheel chocks before releasing the emergency brake. Once all four tires are back on the ground, drive off the block and finish tightening the lug nuts.
Contact a Tire Repair and Replacement Expert in Denver Today
While understanding how to change a tire is essential, being able to do so without a jack might be useful. But calling an emergency roadside repair service for mobile flat tire repair is the best course of action for replacing a flat tire when you don’t have a jack.