- Headlight Bulb in Step 1. To open the hood, find the handle.
- Pull the latch up by reaching under the hood’s front where there is a tiny notch.
- Find the light bulb.
- To remove the assembly, rotate it 45 degrees the other direction of the clock.
- Pull while lifting the lock up.
- Repeat steps 3-5 to remove the other bulb after you’ve located it.
In This Article...
What is the cost of changing the headlights?
Headlamp alignment adjustments typically cost between $41 and $52. Between $41 and $52 is the expected labor cost range. Taxes and other costs are not included in this range, nor are your particular vehicle or geographic area taken into account.
How far up should you set your headlights?
Your vehicle’s ride height can be subtly altered by suspension issues or a large cargo load, which may also cause one or both headlights to move. Your lights may become out of alignment as a result of a collision or running over a road obstruction.
Parking the car on a level surface and shining the headlights on a wall or garage door 25 feet in front of you can help determine whether the headlights are accurately aimed (some cars may require a different distance). For the majority of vehicles, the top of the low beam that shines on the wall should be at or just slightly below the height of the center of the headlight lens. You can anticipate that the light pattern will be lower on the driver’s side to avoid blinding other cars and higher on the passenger’s right side to highlight traffic signs. This should help you determine whether the beams on both sides are pointed in the right directions.
Another approach is to park the car five feet from the wall and then mark the wall’s vertical and horizontal light beam centers with masking tape. Reposition the car 25 feet back. The light beams should be around the same height both vertically and horizontally with the help of the tape line.
For adjusting headlight height, vehicles typically feature a screw or bolt on the headlight assembly. Some vehicles additionally include a screw for adjusting horizontal aim. A bubble level is also included in some cars to aid in modifications.
Without taking apart components like the battery, you might not have much room or even be able to reach the adjusters on some vehicles. Additionally, the vehicle must be perpendicular to the surface you’re shining the headlights on, be on properly level ground, and have no damage to the suspension system, flat tires, or baggage that would impact the ride height.
The owner’s manuals of many vehicles offer scant or no advice on headlight aiming. Ask a repair business to check if you’re unsure. A dealership may inspect the headlight aim and align it for free if the car is still under the basic warranty.
View the video below for a visual representation of everything mentioned above. Additionally, remember to regularly clean your headlights.
Describe an HIR2 bulb.
CI1255 HIR2 halogen bulbs are frequently found on Lexus and Toyota automobiles. The UV-reduced HELLA halogen automobile bulbs are secure for use in contemporary headlamps with polycarbonate lenses.