How to Set Up a Toyota Car Remote
- Within five seconds, turn your ignition key from “off” to “on” again.
- Close and reopen the driver door twice in the following 40 seconds. Then, put the key in and take it out of the ignition once again.
- Once more, make sure you finish steps 1 and 2 within 40 seconds.
In This Article...
I have a Toyota Smart Key; how can I program it?
Process for Programming a Toyota Key Fob
- The Toyota’s driver’s seat is where you should be.
- From “off” to “on,” turn your key in the ignition.
- Within five seconds, quickly turn your ignition key from “off” to “on” again.
- Your ignition key needs to be removed.
- Close and reopen the driver’s door twice in the next 40 seconds.
Where is the deactivation switch for the smart key?
We frequently receive a lot of inquiries about Toyota Smart Key and push button start from prospective automobile buyers who stop by to visit us about purchasing a brand-new 2016 Toyota RAV4. It’s a useful feature for drivers, but many people looking to buy a car make reservations because they’re worried about what might happen if it breaks down. When we examine how to start your Toyota when Smart Key won’t work, take a look at some of the potential causes and how to handle each situation.
Reasons Why Toyota Smart Key and Push Button Start Won’t Work
Pressing the START button on your brand-new 2016 Toyota Camry and having the engine not start is one of the most discouraging experiences you can have. There are four main causes for this that might happen, and many of them are simple to fix. See how you can respond to the main causes of this, which are described below.
- The brake pedal is not being pressed firmly by your foot.
- Low on power is the Toyota Smart Key.
- You have a weak engine battery.
- It’s possible that you pressed the Smart Key deactivation button by accident.
Some of these problems are far simpler to solve than others. The first thing to do is to check that your foot is firmly on the brake pedal. Without taking that simple step and firmly tapping the brake, this safety function will prevent you from starting the key.
Your key fob’s battery might be low if your 2016 Toyota Prius still won’t start. Try using a different Smart Key or bringing the key fob closer to the START button. Check your owner’s manual for advice on replacing the battery if this appears to be the issue.
Another possible explanation for why your Toyota won’t start with Smart Key is that you accidentally pressed the deactivation switch. A little-known component that can give you trouble is the Smart Key deactivation switch, which is situated below the steering wheel at the bottom of the instrument panel. You only need to turn a switch to resume your activities.
When you push the START button, your instrument panel may darken, which could be a sign that your car’s battery is low. Have a friend jumpstart your car for you if necessary, or check your battery connection. If this keeps happening, you might wish to make an appointment for service with the Toyota of Greensburg Service Department.
Replace the batteries inside the key fobs
If you haven’t changed the battery in the key fob(s) in a while, do so now before continuing. When you try to reprogram a key fob with a defective battery, it can be a real pain. The batteries are often inexpensive and simple to replace. If you are unsure how to change them, consult your owner’s manual.
Get inside the car
With your car keys and the remote in hand, go in the driver’s seat and lock all the doors. Closing the doors is crucial because if you leave one open, it can disrupt the procedure.
Turn on the ignition
Once seated, turn the key to the “On” position in the ignition to turn the electrical systems on. Do not start the engine and double-check that the ignition is not in the radio mode.
Press the lock button on the remote key
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position. This notifies your electronic control units that the signal is coming from your key in the ignition and does save the info later. How to Start & Unlock a Car With a Dead Key Fob
Listen for a Lock Sound
You will hear the lock sound once you have completed the aforementioned steps. You have now accessed the programming mode, as indicated by this. Press the lock button once more in the following five seconds to complete the programming.
Programming additional remotes
If there are other remotes, program them successfully by pressing the “Lock” button within 10 seconds after entering the programming mode.
Step out from your car and test the result
Close all doors as you exit the vehicle and take your key fobs with you. Test the functionality of both unlocks with each of your key fobs that were programmed.
Why doesn’t my automobile recognize my key fob?
The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available.
Use the key that is included in the spare fob if it is not available to unlock the door. Check your owner’s manual for information on how to start your automobile when the key fob malfunctions.
After changing the battery, is the Toyota key fob required to be reprogrammed?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reprogram the fob if changing the batteries has erased this connection or if it was somehow disrupted in order for it to once again recognize your automobile.
Standard programming sequence
Your key fob can typically be reconfigured by following this typical procedure:
Instead of starting and then returning to the locked position, turn the key into the run position. Repeat this multiple times.
You’ll typically hear a chime or other sound when you’ve cycled the key enough times. At that point, you can push the lock or unlock button on your key fob to hear another chime.
What is the cost for Toyota to program a key fob?
Visit your neighborhood Toyota shop or use a mobile vehicle locksmith in Maricopa, Arizona, to obtain a replacement Toyota Smart Key.
Toyota Smart keys will run you anywhere from $260 to $400, including programming and key cutting. Get an Instant Estimate depending on the location, year, and model of your Toyota.
Yes! Although most of the time the cost of the key is negligible in relation to the expense of programming it, if you purchased a spare key online, you can contact a local auto locksmith to do it for you.
Why won’t my Smart Key function?
Test the spare key to ensure that the remote is the issue. The other key might only require a new battery if the lock and unlock buttons function properly. The central locking system on your automobile is probably the issue rather than your key fob if the doors won’t lock or unlock with your smart key but the lights flash or you can activate the alarm with the panic button.
Why won’t my keyless entry work?
If your key fob isn’t detected inside the car, the keyless entry system won’t start the engine. The system probably won’t be able to tell when the key fob is inside the car if it has a dead battery, which will prevent the engine from starting. By pressing down while placing the fob on the start engine button, you can get past this problem. Even though this should enable your engine to start, it is still beneficial to change the fob batteries whenever you have the opportunity.
Can an old Toyota key fob be reprogrammed?
I’m here. As long as the key is the same for each vehicle, you can reprogram a key fob to work with that vehicle. In this situation, if the key can open the doors, you would need to take the following actions:
- The key fob’s battery should be removed and then replaced (unless you put in a new battery)
- After unplugging the vehicle’s battery wires, wait 30 seconds, then reconnect them (reset computer).
- Turn the key to the ON position after inserting it into the ignition.
- In the OFF position, turn the key.
- Locking the door simultaneously with your hand and the remote requires turning the key to the ON position.
- While simultaneously using the remote and your hand to unlock the door, turn the key to the ON position.
- Remove the ignition switch’s key.
- the driver door with the key.
- Push the lock and unlock buttons on the key fob simultaneously with locking and unlocking the door with the key – (do this 3 times).
- Try using the remote to unlock the doors while the door is closed after taking the key out of the lock.
- Put the key in the ignition switch and attempt to start the engine if the doors will lock.
After completing these procedures, the key fob has been successfully reprogrammed to your car if the engine starts. If the key does not lock the doors or start the engine, it may be completely different, and you will need to get a new key. Seek out a specialist, like one from Your Mechanic, if you require more help with your keyless entry system.
Step 3: Cycle the Ignition
Put your key in the ignition and hold down the “UNLOCK” button on your door. We will now turn the ignition on and off twice. Please take note that we are merely turning the key one notch to power the electrical systems, not starting the car.
Step 5: Hold Down the “UNLOCK and “LOCK Button on Your Fob
Press and hold the “LOCK” and “UNLOCK” buttons on the key fob simultaneously until the locks cycle one more to program your keyless-entry remote. Please be patient as this could take up to 30 seconds.