How much does a Toyota Highlander (20202021) hitch add on cost? For a Toyota Highlander, a hitch costs between $200 and $225.
In This Article...
How much does mounting a hitch cost?
The price of installing a trailer hitch varies greatly depending on the installer you select and the kind of towing vehicle you want to use. For a standard hitch installation, budget $100 to $150 for the service. Hitch installations that are more difficult and time-consuming could be more expensive. Remember that hitch parts can cost anything from $25 to $200, and they aren’t cheap either.
What is the price of installing a hitch on an SUV?
The short answer is that it depends on the sort of tow hitch you have, the make and model of your automobile, and how much work it will take to install it. For instance, while some vehicles don’t require drilling to attach a tow hitch, some must.
Hitch installation costs typically range from $100 to $800. Remember that you’ll also need to purchase the tow hitch and other components individually, which can easily cost an additional $150 to $200.
The following vehicle parts are necessary for tow hitch installation, along with our recommended Amazon selections for each:
What does it cost to attach a hitch to an SUV?
The type of tow hitch, the make and model of your automobile, and the amount of labor required for installation all play a role in the short answer. For instance, while some cars have no-drill installations, others need to be drilled in order to accommodate the tow hitch.
Expect to pay between $100 and $800 for hitch installation. Keep in mind that you’ll also need to buy the tow hitch and other parts separately, which might easily cost an additional $150200.
Here are the vehicle parts needed for tow hitch installation, along with our favorite choices from Amazon for each:
Can I put a hitch on my own?
Look up the installation instructions or installation videos online for the hitch you are contemplating before making a purchase, and then determine whether you can install it yourself or if you need to bring it to a pro.
Can I install a hitch myself?
If you have the appropriate tools, you can install a trailer hitch by yourself. DIY hitch installation is an excellent technique to reduce the cost of installing a trailer hitch.
Installation of CURT custom hitches is designed to be as simple and painless as possible. The majority of CURT hitches are simple to install in your garage using standard hand tools.
Does adding a hitch invalidate a warranty?
Your 2012 Kia Optima will fit the Curt Trailer Hitch Receiver # C11025 without any problems. The Magnuson-Moss Warranty Act, which protects customers, provides, in part, that unless the extra part really creates a problem, then installation and use of the part will not void the warranty. Therefore, installing an aftermarket trailer hitch or any other part will not void the warranty.
To help, I’ve included a video of the installation along with the directions. Curt does need the use of a stability strap # 18050 if you intend to use this hitch with a bike rack or other accessory for their warranty.
Can a car be equipped with a hitch?
Installing a tow hitch, whether for a rental vehicle or your car, is pretty typical (and relatively easy). On some cars and with particular hitch types, it can get tricky, but for the most part, simple installs just need a few basic tools, so you won’t need to spend a lot of money on a new toolbox only for this project.
In order to help you save money and learn a new skill to brag about to your friends, we’ve broken down the entire trailer hitch installation procedure:
A Toyota Highlander may be available with a towing kit.
How much can a Toyota Highlander tow? With the optional tow package installed, the maximum towing capacity of this tough SUV is 5,000 pounds. Here are a handful of the 2022 Toyota Highlander’s standout performance attributes: a 295 horsepower and 263 lb-ft of torque 3.5L V6 engine.
Which Toyota Highlander offers a kit for towing?
Many people think of a powerful pickup truck speeding down the freeway pulling a massive trailer when they think about towing. The fact is, you can move heavy objects without a pickup truck. If you have the right information, your SUV, crossover, or even sedan (like the Camry) can haul cargo around town safely and easily:
You can’t go wrong with a Toyota Highlander XLE if you need a substantial towing vehicle but don’t want to acquire a pickup truck. The 20142019 versions’ towing capacity even outperforms that of the Tacoma (which tops off at 3,500 pounds). The Highlander’s top trim level is XLE. With the optional towing kit and its V6 engine, it can tow up to 5,000 pounds*. For comparison, the LE trim level’s base engine, which has four cylinders, can tow up to 1,500 pounds.
Three of the most popular items that people tow that weigh up to 5,000 pounds are listed below to give you an idea of what the Highlander’s highest trim level can tow:
Can an SUV be upgraded with a tow package?
When even the largest SUV isn’t large enough to accommodate your passengers, their goods, and their toys, it’s time to tow. Even though almost any car may be equipped with a tow hitch, the best SUVs for towing can be purchased with a tow package already installed (either from the factory or a dealer). Strong body-on-frame SUVs often have greater tow ratings, but some unibody crossovers also come with the ability to tow. We’ve put up a list of some of the latest SUVs that are currently most effective at towing.
Is wiring required for a hitch?
If you intend to tow a trailer or camper, you do indeed require wiring for a hitch. Your trailer’s turn signals, running lights, and brake lights are all connected by the wiring. Wiring is therefore required.
Hitch wiring installation step-by-step
So is feasible to wire your trailer hitch yourself, though we advise hiring a professional to do it. This section explains how to carry it out independently.
In order to be placed in the vehicle, trailer hitches are always delivered with the appropriate lengths, thicknesses, and connectors. How to complete this installation is specifically outlined in the user manuals that are sent with each unique harness. Pay close attention to the detailed plan:
You must ensure that the electrical circuits of the vehicle to be fitted are in good working order before beginning the installation of a harness. Verify that all of the lights are working properly and that the instrument panel’s problem indicator is not on.
Of course, you’ve customized the settings to suit your tastes. Consider settings like radio code, seat position, and seat heating when they are accessible on the car. To reset them to their proper positions following installation, make a note of every configuration.
It is important to detach the battery’s negative pole in order to operate safely. This is done to prevent noise when you connect the electricity.
A hybrid or electric vehicle should be disconnected from the power source with great care.
Manufacturers of automobiles occasionally ship their products with and without coupling preparation. Outside, you cannot see this.
In the installation manual, the wire harness entry location is always identified. This route is typically found in the vehicle’s rear panel, which minimizes the chance of water infiltration. The OEM will always specify the point of entry’s location, which is typically already prepared. Sometimes drilling is still required. Please paint the hole created in this situation with anticorrosive paint.
Install the plug on your tow bar bracket after wiring it. The first seven pins of a 13-pin receptacle work in the same way that regular seven-pin receptacles do. Your wire harness is, of course, equipped with the extra wiring required for the additional options of a 13-pin harness in the case of a 13-pin socket.
There are two places where the wire is installed. The entrance point in your car’s back panel is the first location. You can pull the wiring towards the direction of the trunk using this entrance point. You must be exact and cautious.
The metal of the car can harm the wire harness strand if you pull the wiring too firmly. After that, your wiring will be stripped. You will also need to pull the wire to the front of the car from the trunk. Please take the side panels off your car cautiously.
Make sure the panels can be put back in their original positions by neatly concealing the wiring in the areas behind the panels. Be careful not to harm the wiring when putting the panels.
Your car’s panels are frequently fastened with flimsy clips. Therefore, a trim removal set with U-shaped and V-shaped levers is needed. They can be put behind the clips very quickly, allowing for a quick and secure interior disassembly.
Pulling the cable from the back to the front is simple when there is a return spring. You won’t have to remove every panel, which saves time. The usage of cable ties helps to direct the wiring. When securing them, exercise caution. The wire can break if you tighten them up too much.
The harness needs to be connected to the car in the next step. It is crucial that you adhere to the manual’s directions. You can only then create a secure connection without interruption. There are many different methods to connect.
Utilizing socket contacts is pretty simple when dealing with several automakers (the connections at the end of a cable). Simply add these to the original connectors in the desired and numbered place. Because the contacts are sense-sensitive, exercise caution. A poor connection can be established very rapidly, but it is quite simple to repair it by removing the offending elements with specialized extraction tools.
You may occasionally need to cut a cable. The wire’s end must then be fitted with an electrical sleeve to create a new connection. The ideal connection is made easier with the aid of a crimping tool.
Use just the parts provided during installation in order to guarantee proper installation and subsequently grant the warranty.
The ground points must be connected once the connections have been made. Again, it is crucial that you adhere to the manual’s directions. You can only then create a secure connection without interruption.
An electrical connection can be made in a variety of ways. It is recommended to draw electricity from the fuse box underneath the hood for more recent vehicles. Brink has created special fuse holders for this choice. It is quite simple to put this fuse holder into the fuse box, where it receives the current required by the wire harness.
Making an electrical connection directly from the battery is another option. However, this calls for another examination. Verify that this procedure doesn’t cause your battery to drain or to interfere with your car’s memory circuits.
After installation, you might need to turn on the wire harness in the automobile. The moment the hitch is turned on, it registers itself in the car’s electronics, allowing them to continue operating normally and adapting as soon as a trailer is hitched.
Most harnesses can be activated by you with universal diagnostic tools. Then, the automated gearbox, increased cooling, and TSP are turned on, along with the deletion of the reversing sensors, fog lights, and lane assist.
Note that a dealer is the only one who can activate the wire harness on some models of car. There are also charged fees.
You must thoroughly inspect the installed wiring harness’s performance before you may drive your car again. There are various approaches to carrying out this check.
- Self-diagnosis feature: A few of our unique electrical harnesses have a self-diagnosis feature. The embedded module emits a red or green signal after installation (led). Red indicates a failed installation that needs to be redone. Green denotes successful completion of each step. You can be sure that the wire harness installation was done correctly every time because of the self-diagnosis capability.
- Pilot lights should not be used; they are ineffective for use with modern automobiles. The same is true for little testers equipped with LED bulbs. It will be necessary to do the test with two individuals if your harness does not feature automatic light control.
You will need to go behind the wheel, turn on the engine, and manage all of your vehicle’s lighting functions after connecting your trailer plug to the plug. The opposing driver should then verify that your trailer’s brake lights, turn signals, fog lights, and reverse lights are all operational.
Which type of hitch is required for a bike rack?
A trailer hitch must be installed on your car in order to use a hitch mount bike rack; roof and trunk racks don’t. Almost any car, from little hatchbacks to large SUVs, may be equipped with a trailer hitch. Find a hitch for your car here or read more about choosing a hitch here.