The Toyota Camry series has been a leader in pretty much every category, from interior tech sophistication to power and performance under the hood. With this sedan legend, you may reach whatever driving objectives you have, but it will only function at its peak when the proper oil is used. Since each engine is unique, it might be challenging to determine which sort is best for your engine. If, however, you prefer to change your own oil, we have the solution right here. Visit us today to view the recommended oil type for each engine in the 2018 Toyota Camry!
In This Article...
Toyota Camry 2.5-liter Inline 4 oil type
In order to properly maintain your engine, you should aim to use SAE 0W-16 viscosity oil, according to the official 2018 Toyota Camry owner’s manual. This is because of how this oil is created, which gives you the best performance possible when starting your engine in cold weather, operating at high speeds, and doing anything else. However, you’re safe utilizing higher level fluids like SAE 0W-20 oil indoors if SAE 0W-16 is not readily available.
Toyota Camry 3.5-liter V6 oil type
On higher trims of the 2018 Camry, there is also a 3.5-liter V6 engine that produces greater power and has a different arrangement, necessitating the use of a stronger oil. Owner’s instructions advise using SAE 0W-20 for this, while SAE 5W-20 can be used in a pinch if necessary.
Tools Needed:
Now you may install the engine oil funnel where your oil cap threads by grabbing it from the package. You can pour oil into the funnel fast because of its wide design without worrying that it may run over the top. Simply place the 1 quart bottles of fresh oil upside down in the funnel and allow the liquid to drain in while you open the next container.
Check the dipstick after adding this amount of oil to see whether you are close to the recommended level. When in doubt, it is preferable to add oil gradually and check frequently as opposed to overfilling.
Remove the funnel once the dipstick’s reading is accurate. You can clean it by wiping it with a rag.
Motivx Pro Tip: To develop oil pressure and fill the oil filter, start your Camry and let it run for a few seconds. When the dipstick reaches the full mark, turn off your engine and fill off the oil.
Automatic Transmission Oil Capacity
Depending on the automatic gearbox, the 2022 Toyota Camry can hold 7.8 or 7.7 quarts (7.38 or 7.29 liters) of automatic transmission oil.
How often should the oil be changed in a 2018 Toyota Camry?
For traditional oil, Toyota advises changing your 2018 Toyota Camry’s oil and filter every 3,0005,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
Can I use 0W20 with 0W16?
How four points on the viscosity rating can affect the engine’s performance and longevity is the main concern among shops. It is challenging to locate this information, let alone assess it.
The owner’s manual is the only document that cannot be disputed. Honda suggests using an API-certified 0W16 or 0W20 oil in the 2018 Honda Fit. The A25A-FKS 2.5L four-cylinder engine in the 2018 Toyota Camry is compatible with 0W16 oil that complies with API SN Resource Conserving specifications. However, they write, “If 0W16 is not available, 0W20 oil may be used,” in the paragraph after that. However, the following oil change requires that it be swapped out with 0W16.
The optimal option for fuel efficiency and cold-weather starting, according to owner’s manuals and service literature, is 0W16.
Is the 0W16 or 0W20 debate easily resolved? Yes, use 0W16 oil if you want to keep your consumers satisfied. Can 0W20 be used? When 0W16 is not available, it can be utilized in a pinch, according to both OEMs.
How much oil should be changed in a Toyota Camry?
How to change your oil the right manner is:
- Find the drain oil plug by climbing underneath your Camry. It is located under the engine.
- Slide the drain oil plug with the oil collection pan underneath. After that, loosen the plug just enough to allow the oil to spill into the pan.
- Locate the oil filter once the oil has been drained. Depending on your Toyota Camry’s model and year, the exact placement may change. Usually, it can be found on the side or bottom of the engine.
- Remove the oil filter by using an oil filter wrench or similar device.
- Depending on the type of replacement you bought, carefully swap out the oil filter for a new one or replace the contents.
- Replace the drain oil plug next, being careful not to tighten it too much.
- Once the work on the underbelly is finished, open the hood and remove the engine’s oil cover.
- Add four quarts of oil using the funnel (or the amount suggested in your owner’s handbook).
- Check the drain oil plug frequently while the oil is being added to make sure nothing is leaking.
- After you have added many quarts, turn on your Camry and let it run for a while. Using the dipstick, check the oil level and top it off as necessary.
- Resetting the maintenance light is something you should do after you’ve done applying the oil.
Is 5w30 a viable alternative to 5w20?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because your engine was developed with 5w20 oil in mind when it was constructed, all of the parts that come into contact with it must be a specified viscosity after the engine hits operational temperature, or 212.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you substitute 5w30 oil for 5w20 when doing so is not advised or authorized by the owners handbook, it could violate your car’s powertrain warranty, impair engine performance, and ultimately harm your engine.
Using the proper oil keeps your engine operating at its best.
use Jerry to be sure you maintain it covered with the appropriate insurance policy. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
How much fuel can a Toyota Camry hold?
The majority of engines need between 5 and 8 quarts of oil. For instance, a 4-cylinder engine needs at least 5 quarts of oil, whereas a 6-cylinder engine needs about 6 quarts.
0W-16 oil: is it synthetic?
Before 2018, no automobiles being marketed in the US needed SAE 0W-16 oils. We are introducing Pennzoil Platinum SAE 0W-16 Full-Synthetic Motor Oil with Pure Plus Technology in light of the introduction of the 2018 Toyota Camry 2.5L Four-Cylinder model and the 2018 Honda Fit, as well as our expectation that auto manufacturers will utilize the fuel economy benefits of SAE 0W-16 motor oils in future vehicles.
What kind of car uses 0W-16 oil?
As automakers work to maximize fuel economy, 0W-16 oils address new engine technologies. Starting with the 2018 model year, Honda, Lexus, and Toyota advise using 0W-16 oils in a number of gasoline and hybrid engines.
We give Mobil 1TM 0W-16 Advanced Fuel Economy motor oil, a cutting-edge full synthetic formulation with an ultra-low viscosity that was created to help increase engine economy and deliver exceptional wear protection.
What do the 0W-16 digits represent? The figures represent the oil’s weight and thickness, or viscosity. When it’s cold, motor oil thickens; when it’s hot, it thins. The first value represents the oil’s viscosity when it is cold, while the second number represents the viscosity when it is operating temperature.
Choose the product that best suits your needs by comparing the many degrees of protection that each one of these offers.
How much oil is required by a 4-cylinder engine?
Depending on the engine size, the majority of engines need 5 to 8 quarts of oil. Less oil is needed to fill the engine’s volume the smaller the engine is.
Depending on the engine size, an 8-cylinder engine uses anywhere from 5 to 8 quarts of fuel.
This sum also changes based on whether you request that the mechanic change the oil filter in conjunction with an oil change.
The owner’s manual, which is typically provided under the lubrication system in the vehicle specs section, is one resource available to help car owners locate the oil capacity of an engine. You should also look at the manufacturer’s website. When you arrive at the website, check for a section designated for vehicle owners, which is typically at the bottom of the page. The oil and fluid capacities of numerous various makes and models of vehicles and trucks are listed on Fluid Capacity, which is another online resource that vehicle owners can search.