Up to 5 quarts of oil; excess quarts will incur an additional fee.
In This Article...
The amount of oil a Toyota Corolla uses.
Follow these instructions to replace the oil:
- Look for the drain oil plug by climbing underneath the Corolla. It is located beneath the engine.
- Slide the drain plug with the oil collection container underneath. The drain plug should be loosened using a socket wrench and a 14-mm socket.
- You can fully loosen and remove the plug to hasten the procedure by waiting until the oil begins to drain from the engine.
- Once the oil is finished, you must find the oil filter.
- Remove the oil filter using a socket wrench or other removal tool and an oil filter socket.
- Wait until all extra oil has finished draining before emptying the oil from the filter into the pan.
- Clean the area surrounding the oil filter fitting on the engine block using a rag.
- Then, take a clean rag and dab some fresh oil on it. Wipe the new oil filter’s edges clean with this oil.
- Reverse the removal instructions to install the new oil filter.
- Reinstall the drain plug and make sure not to overtighten it while doing so.
- The oil cap is located on top of the engine when the hood is opened. Add 3 to 4 liters of fresh oil. Take your time when adding fresh oil to prevent spills and/or overfilling.
- Check the dipstick after you’ve filled it to make sure you have the right amount of oil.
The maintenance light needs to be reset, last but not least. Turn the key to the accessory (ACC) position to accomplish that. Turn off the key after setting the odometer to mileage rather than trip. As you turn the key back to ACC, press and hold the button you used to switch to trip. While you press and hold the button, the light ought to blink.
How often should an oil change be performed on a 2012 Toyota Corolla?
One of the most important and fundamental maintenance for your car is an oil change. Toyota suggests changing the oil and filter in your 2012 Toyota Corolla every 3,000 to 5,000 miles, but it’s important to consult your owner’s manual and your dealer to determine the intervals that are ideal for your car.
How frequently should I have my 2012 Toyota Corolla’s oil changed?
For conventional oil, Toyota advises changing your 2012 Toyota Corolla’s oil and filter every 3,000 to 5,000 miles. One of the most important and crucial procedures for your car is an oil change. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
Will 5W 30 work in a Toyota Corolla?
* Recommended viscosity (SAE): SAE 0W-20, 5W-20, or 5W-30 engine oil is advised in severely cold temperatures since SAE 10W-30 or a higher viscosity engine oil may make it difficult to start the engine.
Here is an explanation of oil viscosity using 0W-20 as an example.
The characteristic of the oil that allows for cold starting is indicated by the 0W component of the oil viscosity rating. Engine starting in cold conditions is made easier by oils having a lower value before the W.
The number 20 in 0W-20 denotes the oil’s characteristic viscosity at high temperatures. If the vehicle is run at high speeds or with a heavy load, an oil with a higher viscosity (higher value) may be more appropriate.
How long does it take to change the oil in a Toyota Corolla?
The Toyota Corolla has a longstanding reputation for being a durable vehicle. Because of this, Corolla models that are more than ten years old are still being driven today. With the right maintenance and care, your Corolla will survive for many more years. Taking your car in for routine oil changes with your service provider is one strategy to extend the life of your vehicle.
There are still a lot of questions about how frequently you should have the oil changed in your car, even though the majority of dealerships provide a suggested mileage or return date. You can find the suggested oil change schedule, which is roughly every six months or 5,000 miles, in the Toyota guidebook that came with your Corolla.
However, many motorists choose to replace their oil more frequently, taking their vehicles to the shop every three months or 3,000 miles. It’s generally reasonable to presume that you need an oil change if you are unsure of when your last one was and can’t recall when it was done.
How can you turn a Toyota Corolla’s maintenance light back on?
Turn the key back to the “On position after finding the “trip reset button once more. Hold the trip reset button down until your odometer lights 0 miles. The maintenance light will thereafter go out.
How long is 0w20 good for?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.