Toyota Corollas from 2009 require 4.5 gallons of oil. The engine needs high-quality oil to function properly. At some point, you will experience oil issues. The engine can quit working if the oil is old or poor. The engine could make a knocking sound. Poor gas mileage is a possibility. An horrible burning smell is a prevalent issue. This needs to be carefully examined right away to prevent the car from exploding. One day, you’ll need to change your oil. A decent guideline is every 5,000 to 10,000 miles, approximately. If You don’t replace it, the engine will have issues.
Both 1.8L inline-4 engine variants require 4.4 quarts of synthetic oil, compared to 4 quarts for the 2.4L inline-4 engine option.
In This Article...
The amount of oil a Toyota Corolla uses.
Follow these instructions to replace the oil:
- Look for the drain oil plug by climbing underneath the Corolla. It is located beneath the engine.
- Slide the drain plug with the oil collection container underneath. The drain plug should be loosened using a socket wrench and a 14-mm socket.
- You can fully loosen and remove the plug to hasten the procedure by waiting until the oil begins to drain from the engine.
- Once the oil is finished, you must find the oil filter.
- Remove the oil filter using a socket wrench or other removal tool and an oil filter socket.
- Wait until all extra oil has finished draining before emptying the oil from the filter into the pan.
- Clean the area surrounding the oil filter fitting on the engine block using a rag.
- Then, take a clean rag and dab some fresh oil on it. Wipe the new oil filter’s edges clean with this oil.
- Reverse the removal instructions to install the new oil filter.
- Reinstall the drain plug and make sure not to overtighten it while doing so.
- The oil cap is located on top of the engine when the hood is opened. Add 3 to 4 liters of fresh oil. Take your time when adding fresh oil to prevent spills and/or overfilling.
- Check the dipstick after you’ve filled it to make sure you have the right amount of oil.
The maintenance light needs to be reset, last but not least. Turn the key to the accessory (ACC) position to accomplish that. Turn off the key after setting the odometer to mileage rather than trip. As you turn the key back to ACC, press and hold the button you used to switch to trip. While you press and hold the button, the light ought to blink.
Recommended Oil Change Intervals for Toyota Vehicles
You were supposed to replace your oil every three months or 3,000 miles, whichever came first, according to an old proverb. This is no longer the case, though, as engine technology has developed and become more effective. Toyota advises consumers to have their vehicle’s oil changed professionally or by themselves every six months or five thousand kilometers, whichever comes first.
Recommended Oil Viscosity for Toyota Models
Toyota owners who enjoy DIY projects might be interested in changing their own car’s oil. We endorse this course of action because it offers customers a lot more cost-effective option than even bringing their car to one of the more reasonably priced service facilities nearby. Make sure you are using the right oil if you plan to change your Toyota’s oil on your own. Naturally, as Toyota Genuine Motor Oils are created exclusively for use with Toyota engines, we advise using these. But another choice that is suitable as well is synthetic oil with a viscosity of 5W-30!
Is 0W20 preferable to 5W20?
The Society of Automotive Engineers assigned these oils a viscosity grade, which is a numerical value. The numbers before and after the W denote the oil weight in cold and warm temperature settings, respectively, while the W stands for “Winter.”
These motor oils both have a comparable, wide working temperature range, and are typically used as winter viscosity oils.
On closer investigation, you will see a few slight variations:
A. Cold Viscosity
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
B. Hot Viscosity
At higher temperatures, both oils behave as SAE 20 weight oils. They offer reasonable fuel consumption, improving fuel efficiency while lubricating all of your important engine components.
Both of these grades perform well up to 68 F in terms of their operational temperature range. Under circumstances of high oil pressure and higher temperatures, they are resistant to issues like oil burning and excessive oil consumption.
C. Performance
The thinner oil grades 0W-20 and 5W-20 both work best in cold winter climes.
The 0W-20 oil grade performs better with cold starts due to its reduced viscosity. Additionally, it guards against issues including varnish buildup, engine wear, sludge formation, and low oil pressure. With 0W-20, you may anticipate faster oil circulation and a smoother flow.
Therefore, 0W-20 oil grade would be the best choice for you if you plan to travel frequently in regions with below-freezing temperatures and infrequently in regions with higher temperatures.
However, 5W-20 performs a little bit better in seasonal climates due to its higher viscosity. Because of its somewhat greater thickness, it resists oil thinning at higher temperatures better.
There are some vehicles that can use both 0W-20 and 5W-20 oil. However, consult with your mechanic regarding the suggested oil for your vehicle before switching to a different viscosity grade.
D. Fuel Economy
The mileage and fuel efficiency of both 0W-20 and 5W-20 oil are essentially the same.
Due to its thinner oil flow and low viscosity, 0W-20 oil may provide you somewhat improved fuel efficiency and less carbon emissions.
The type of motor oil you useconventional, synthetic blend, or totally syntheticalso makes a difference. The 0W-20 and 5W-20 motor oils are fully synthetic and will provide the best possible fuel economy.
E. Pricing
Typically, 0W-20 oil costs a little bit more than 5W-20 oil. This is due to the fact that it is more stable than the latter due to being a full or semi synthetic oil.
Your engine oil’s cost varies from provider to seller as well. To choose the most economical alternative for your car, be sure to consult your mechanic!
What are some things you need to understand about these multigrade oils keeping these in mind?
Will 5W-30 work in a Toyota Corolla?
* Recommended viscosity (SAE): SAE 0W-20, 5W-20, or 5W-30 engine oil is advised in severely cold temperatures since SAE 10W-30 or a higher viscosity engine oil may make it difficult to start the engine.
Here is an explanation of oil viscosity using 0W-20 as an example.
The characteristic of the oil that allows for cold starting is indicated by the 0W component of the oil viscosity rating. Engine starting in cold conditions is made easier by oils having a lower value before the W.
The number 20 in 0W-20 denotes the oil’s characteristic viscosity at high temperatures. If the vehicle is run at high speeds or with a heavy load, an oil with a higher viscosity (higher value) may be more appropriate.
How long does it take to change the oil in a Toyota Corolla?
The Toyota Corolla has a longstanding reputation for being a durable vehicle. Because of this, Corolla models that are more than ten years old are still being driven today. With the right maintenance and care, your Corolla will survive for many more years. Taking your car in for routine oil changes with your service provider is one strategy to extend the life of your vehicle.
There are still a lot of questions about how frequently you should have the oil changed in your car, even though the majority of dealerships provide a suggested mileage or return date. You can find the suggested oil change schedule, which is roughly every six months or 5,000 miles, in the Toyota guidebook that came with your Corolla.
However, many motorists choose to replace their oil more frequently, taking their vehicles to the shop every three months or 3,000 miles. It’s generally reasonable to presume that you need an oil change if you are unsure of when your last one was and can’t recall when it was done.
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- Synthetic Oil Maintains Cleaner Engines
- increased protection against engine wear
- Better Performance at Low Temperatures
- Enhanced Protection at Higher Temperatures
- Enhanced Protection for Performance and Turbocharged Parts
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.