Brand Name
Save time, money, and expensive auto repairs by doing them yourself! Amsoil is there for you! Secure the engine of your Tacoma!
4WD, 5.5 gallons of filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
RWD Base, 4.8 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
RWD PRE, 5.5 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
RWD XRUN, 4.8 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
In This Article...
The amount of oil a Toyota Tacoma V6 consumes.
The SAE 0w-20 synthetic oil that the Tacoma uses. The 3.5L (211 ci) V6 engine holds 6.1 quarts, whereas the 2.7L (164 ci) 4 cylinder engine stores 6.2 quarts (6.2 with a tow package).
How much oil do I need for a Toyota Tacoma oil change?
The majority of engines need between 5 and 8 quarts of oil. For instance, a 4-cylinder engine needs at least 5 quarts of oil, whereas a 6-cylinder engine needs about 6 quarts. Call Courtesy Toyota of Brandon right away and ask to speak with one of our service consultants for further details.
The amount of oil a 2008 Tacoma V6 consumes
Toyota advises using only authentic Toyota motor oil when changing the oil in a 2008 Toyota Tacoma.
To make it even simpler for you, I did the research and located authentic oil and filter goods on Amazon.
For 2.7 L engines, the 2008 Toyota Tacoma requires 6.1 q of 0W-20, and for 4.0 L engines, 4.8/5.5 q of 5W-30.
In the absence of Toyota engine oil, any oil that complies with the requirements of the ILSAC-GF-5 multigrade oil can be used.
Toyota also claims that 10W-30 can be used in the 4.0 L’s place of SAE 5W-30 if SAE 5W-30 is unavailable, but that this should only be done once in a row.
Except where otherwise noted, the data presented in this article was taken directly from the 2008 Toyota Tacoma owner’s manual. You are in charge of making sure the right oil is used in your truck.
What makes 0W-20 and 5W-20 different from one another?
The Society of Automotive Engineers assigned these oils a viscosity grade, which is a numerical value (SAE). The numbers before and after the W denote the oil weight in cold and warm temperature settings, respectively, while the W stands for “Winter.”
These motor oils both have a comparable, wide working temperature range, and are typically used as winter viscosity oils.
On closer investigation, you will see a few slight variations:
A. Cold Viscosity
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
B. Hot Viscosity
At higher temperatures, both oils behave as SAE 20 weight oils. They offer reasonable fuel consumption, improving fuel efficiency while lubricating all of your important engine components.
Both of these grades perform well up to 68 F in terms of their operating temperature range. Under circumstances of high oil pressure and higher temperatures, they are resistant to issues like oil burning and excessive oil consumption.
C. Performance
The thinner oil grades 0W-20 and 5W-20 both work best in cold winter climes.
The 0W-20 oil grade performs better with cold starts due to its reduced viscosity. Additionally, it guards against issues including varnish buildup, engine wear, sludge formation, and low oil pressure. With 0W-20, you may anticipate faster oil circulation and a smoother flow.
Therefore, 0W-20 oil grade would be the best choice for you if you plan to travel frequently in regions with below-freezing temperatures and infrequently in regions with higher temperatures.
However, 5W-20 performs a little bit better in seasonal climates due to its higher viscosity. Because of its somewhat greater thickness, it resists oil thinning at higher temperatures better.
There are some vehicles that can use both 0W-20 and 5W-20 oil. However, consult with your mechanic regarding the suggested oil for your vehicle before switching to a different viscosity grade.
D. Fuel Economy
The mileage and fuel efficiency of both 0W-20 and 5W-20 oil are essentially the same.
Due to its thinner oil flow and low viscosity, 0W-20 oil may provide you somewhat improved fuel efficiency and less carbon emissions.
The type of motor oil you useconventional, synthetic blend, or totally syntheticalso makes a difference. The 0W-20 and 5W-20 motor oils are fully synthetic and will provide the best possible fuel economy.
E. Pricing
Typically, 0W-20 oil costs a little bit more than 5W-20 oil. This is due to the fact that it is more stable than the latter due to being a full or semi synthetic oil.
Your engine oil’s cost varies from provider to seller as well. To choose the most economical alternative for your car, be sure to consult your mechanic!
What are some things you need to understand about these multigrade oils keeping these in mind?
Definition of 5w20 Vs. 5w30
The engine oil type 5w20 is distinguished by its oil weight of 20 in warm weather and a winter grade of 5. It has a lower viscosity than 5w30. While 5w30 has the same viscosity rating of 5 in the winter, it has an oil weight of 30 in the summer, making it thicker.
Working conditions for 5w20 Vs. 5w30
For use in cooler climates, use 5w20. As it moves swiftly and smoothly to deeper engine components with less friction, it makes it possible for a vehicle’s engine to start up rapidly. It immediately lubricates the components. In contrast, 5w30 performs well in warm environments. Unlike 5w20, it does not thin out quickly when exposed to heat. The engine components are therefore better protected overall when using 5w30 at operational temperatures.
Performance of 5w20 Vs. 5w30
These two engine oils function well in the environments for which they were created. Due to its low viscosity and reduced friction in the engine parts, 5w20 is a champion in colder regions with speedier engine starts. In hotter regions where a thick oil is required to resist the higher temperatures, 5w30 excels. Naturally, the engine will heat up more, necessitating a thicker oil. In colder climates, 5w20 is associated with higher performance and fuel economy, whereas 5w30 is associated with better overall engine component protection.
What volume of liquid does a 2008 Tundra hold?
The oil volume with a filter for the 2008 Toyota Tundra is as follows, based on engine types: 4.8 quarts, 4.0L 6-cylinder, engine code 1GR-FE Z. 4.7L 8-cylinder, 2UZ-FE 9 engine code, 6.6 quarts. 7.4 quarts, 5.7L 8-cylinder, engine code 3UR-FE 5.
The amount of oil a 2009 Toyota Tacoma V6 consumes
Toyota advises using only authentic Toyota motor oil when changing the oil in a 2009 Toyota Tacoma.
For 2.7 L engines, the 2009 Toyota Tacoma requires 6.1 q of 0W-20, and for 4.0 L engines, 4.8/5.5 q of 5W-30.
Unless otherwise noted, the data presented in this article was derived from the owner’s manual for the 2009 Toyota Tacoma. You are in charge of making sure the right oil is used in your truck.
The Toyota Tacoma V6 uses what kind of oil?
Oil filter, hardware, and 6 liters of 5W-30 Toyota Tacoma engine oil for 4.0L V6 applications. Enhanced engine protection with Ravenol CleanSynto oil technology.
How long does a Tacoma need between oil changes?
How frequently should a Toyota Tacoma have its oil changed? For traditional oil, Toyota advises changing your Toyota Tacoma’s oil and filter every 3,000 to 5,000 miles. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles. One of the most crucial and important services for your car is an oil change.