One of the most popular midsize cars on the market, the Toyota Camry is known for its longevity. With regular maintenance, you can expect to get between 200,000 and 300,000 miles out of your Camry.
In This Article...
What’s the weight of a Toyota Camry?
The L and LE models of the 2020 Toyota Camry weigh 3241 pounds. Afterward, the Camry XLE weighs either 3351 pounds or 3530 pounds, with the AWD engine weighing a little bit more. The XLE V6 version of the Camry is 3549 pounds heavy. Depending on the trim level chosen, the SE weights 3340 or 3530 pounds.
What kind of car is a 2009 Toyota Camry LE?
Our 2009 Best Midsize Car for the Money award goes to this vehicle. According on our analysis of 83 pieces of research and data from various sources, the Toyota Camry currently has a score of 8.7 out of 10.
A 2009 Toyota Camry has what issues?
Compared to comparable midsize automobiles from the same year, the 2009 Toyota Camry receives more complaints. The 2009 model is one that customers should stay away from because it has more serious issues than other years. The extra $1,500 spent on a 2010 Camry will be well spent because of its much higher reliability.
Around 95,000 miles, engine issues, such as excessive oil consumption, are quite prevalent. There have been more engine problems than in earlier model years, and Toyota is the target of a class action lawsuit. If your car uses a lot of oil, you might need to replace the pistons and rings, which will cost you around $2,000, or you might need to spend up to $5,000 on a new engine.
Another prevalent issue is melting dashboards, which occurs after 80,000 miles. When the car is left in direct sunshine, the component’s glue heats up too much, melting portions. One option is to replace the dash, which will cost over $1,000. However, some owners opt to add a dash cover, which costs less than $100.
One other frequent issue owners have is premature tire wear. The factory-installed tires are inferior to other brands and barely last 25,000 miles on average. For around $800, the issue can be resolved by switching out the original tires for a different type and getting an alignment.
There are more recalls for this model of midsize car from 200910 in total. The accelerator pedal, load carrying labels, stop lamp switch, power window switch, occupant sensing system, and seat heater wiring are among the items that need to be recalled. The most serious issues are those involving the accelerator pedal, which can result in unintentional acceleration and accidents.
What year of the Camry should you avoid purchasing?
The Camry has experienced some difficult times, from engine flaws to recalls that caused owners and manufacturers alike much stress. The years you should avoid and the explanations for why are coming up.
You can always be sure that you got the greatest value possible since CoPilot scans your neighborhood and notifies you if there is a better deal on a comparable vehicle nearby. The best approach to purchase a car is through the CoPilot app.
Toyota Camry
Simply because it has the most issues, the 2007 model is at the top of the list of Toyota Camry years to stay away from. RepairPal lists problems with the automatic transmission as one of the most common complaints. The problem starts when the transmission lags when attempting to accelerate; this can cause it to heat up and may necessitate replacement before owners would want.
The 2007 Camry also has issues with a malfunctioning check engine light, missed shifts, and power steering issues. Even though the complaints are not as severe as those for other models, prospective buyers should nevertheless be aware of them.
Toyota Camry
Although there were significantly fewer complaints, the 2008 Camry didn’t show much improvement. Similar gearbox problems were reported by drivers, who also observed that the check engine light frequently created issues. After the car had traveled 100,000 miles, the ignition coil would start to break, which was one of the more noticeable problems with the 2008 model.
Toyota Camry
The 2009 model continued to have transmission and check engine light issues despite a number of concerns being documented throughout the years. Another minor issue with the 2009 model was the accumulation of muck near the engine, which was caused directly by using the same oil.
Which Toyota Camry model year is best?
Consumer Reports gave the seventh generation Camry’s full production a perfect dependability grade. The most dependable and reasonably priced used Camry sedans can be found in this area. In particular, the 2015 Toyota Camry is inexpensive. These versions are among the top used Camrys, according to Consumer Reports. The Camry is currently in its best generation to date during this run of model years.
What year Camry has issues with its engines?
Everyone agrees that the 2007 Toyota Camry is one of the worst makes to buy.
Because of a “known engine flaw, excessive oil consumption is a serious issue that may result in engine failure, Torque News advises against purchasing this car.
Even though Toyota and other mechanics assert that burning oil is not a problem, the situation is more complicated, and the 2007 model year is infamous for its persistent issues.
With an average repair cost of $2,420 and frequent complaints of excessive oil consumption, used 2007 Toyota Camry vehicles are not worthwhile investments.
What issues are there with Toyota Camrys?
- Regular Transmission Issues There have been more instances of Toyota Camry transmission issues in current versions. Shift delays, stalling, grinding or leaping during low gear acceleration, shaking while in motion, a detectable burning smell, or whistling noises originating from under the hood are all symptoms of transmission issues. It can also be an indicator of a Toyota Camry transmission issue if you have poor fuel efficiency but haven’t seen any of the symptoms above. The price to fix the problem will also vary because gearbox faults can range from Toyota Camry gear change troubles to a reduction in fuel efficiency. As a result, we always advise seeking out a qualified Toyota dealership or repair facility to receive an accurate diagnosis prior to beginning treatment. Ask the mechanic what kind of maintenance you can perform while you’re there to assist prevent your transmission problems from occuring again in the future.
- issues with defective brakes
- Owners have observed that there are a few different ways in which the common Camry brake problem issues present themselves. The most frequent reports are shown below.
- brake failure that occurs intermittently and renders the brakes inoperative. Any type of braking failure carries the risk of making drivers lose control of their vehicles.
- The ABS light never goes out. The part of the braking system that keeps the wheel from locking up when the brakes are applied is called the Anti-Lock Braking System (ABS). The ABS system won’t activate properly when you apply the brakes if the ABS light is on. Although it is technically possible to drive with the ABS light on, it is not recommended because it can be hazardous.
- The brake pedals might turn mushy (sink all the way to the floor) or stiff before they stop responding (have to press down on the pedal heavily).
- When the brakes are applied, the car starts to shake. Even while you can still drive the car when it has this condition, it might occasionally be so bad that the owner finds it challenging to do so.
Don’t keep driving if you think your car’s brakes aren’t working properly. As soon as you can, take it to the repair shop for a thorough diagnosis to determine the root of the issue and the best course of action.
- Starter FailureLast but not least, one of the Toyota Camry issues that were most frequently reported included the starter. Most owners just said that their automobile would suddenly stop starting one day. The owners may have thought it was random, but there are actually a number of primary causes for this to happen. Dead batteries are most likely the root of your Toyota Camry’s starting issues, followed by possible alternator or starter difficulties.
The starter, alternator, or battery are typically totally replaced in order to fix the majority of no-start difficulties. However, sometimes sanitizing the connections or fixing the fuel or ignition system will work. You’ll have a better understanding of the issue and the appropriate solution for your particular circumstance if you have a mechanic professionally diagnose the problem.
Over the years, a few typical Toyota Camry issues have surfaced. However, the Camry has been and will continue to be one of the most popular cars in the US because of its solid reputation for being dependable, safe, and gas-efficient.
What is the 2009 Toyota Camry’s Blue Book value?
Price: The base price of the 2021 Toyota Camry is $24,970. The Toyota Camry is still among the most well-liked and highly recommended sedans available.
Seats
Some items are being recalled by Southeast Toyota Distributors, LLC (SET). 4Runner, Highlander, Sequoia, and Sienna from 2005 to 2011, Avalon and Tundra from 2005 until 2010, Vehicles having aftermarket accessory seat heaters with a copper strand heating element include the 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla. When the seat cushion is crushed, the electrical wiring in the seat heaters may be harmed.
The copper strand heating element could short circuit if damaged, raising the possibility of a fire.
Dealers will disconnect the seat heaters for free and reimburse the cost of the seat heater attachment after SET notifies owners and dealers. A recall was initiated on July 14, 2016. Owners can call 1-866-405-4226 to speak with SET customer care. SET16B is the SET number for this recall.
Visibility
Toyota Motor Company (Toyota) is recalling a number of vehicles from the 2009 to 2011 model years, including the Tundra, Sequoia, Corolla, Corolla Matrix, and Scion xB; the Highlander and Highlander Hybrid; the 2007 and 2009 Camrys; the 2006 to 2011 RAV4s; the 2006 to 2010 Yaris; and the 2009 to 2010 Scion xD and Pontiac Vibe. The sliding electrical contacts on the Power Window Master Switch (PWMS) may have received uneven amounts of grease lubricant during production.
Debris and moisture that enter the switch may cause a short circuit, the switch assembly may overheat and melt, raising the risk of a fire. If the sliding electrical contacts are not protected by lubrication.
Owners will be notified by Toyota, and dealers will inspect the switch and lubricate it if nothing unusual is discovered. The PWMS circuit board will be changed without charge if an anomaly is discovered. The start of the recall is anticipated for December 20, 2015. The toyota customer support number is 1-800-331-4331. Toyota’s recall reference number is C0M.
Some 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4×2 and 4×4, Camry, Highlander, Tundra 4×2 and 4×4, and 2007-2011 Rav4 and 4Runner vehicles are being recalled by Southeast Toyota Distributors, LLC (SET). The seat cushion may compress in the affected vehicles, which might harm the wiring for the seat heaters.
Damage to the seat heater wiring could result in wire shorts, raising the possibility of the seat catching fire and injuring the occupant.
Dealers will disconnect the heaters with copper strand heating elements after notifying owners, and SET will reimburse them for the cost of the seat warmer attachment. The start of the recall is anticipated for January 2015. Owners can call 1-866-405-4226 to speak with SET customer care.
Air bags, seats
Following are some of the models that Southeast Toyota Distributors, LLC (SET) is recalling from model years 2009 through 2013: Model years 2009 to 2012 for Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; 2009 to 2010 for Avalon, FJ Cruiser, and Highlander Hybrid; 2010 to 2013 for Corolla, Sienna, and Tundra; 2009 to 2013 for Highlander and Venza; 2012 for the Prius V; and 2010 to 2012 for Sequoia. These vehicles may not have had the calibration of the passenger seat occupant sensing system tested when they were modified by SET to incorporate items like leather seat covers, seat heaters, or headrest DVD systems. If the calibration test is unsuccessful, the occupancy sensing system could not function as intended.
The front passenger airbags may not deploy or they may deploy improperly for the passenger’s size and location if the front passenger seat occupant detection system is out of calibration. This could raise the possibility of bodily injury in the event that an automobile accident results in the need for airbag deployment.
Owners will be notified by Southeast Toyota, and dealers will check the occupant detection sensors’ sensitivity and reset them as necessary. On March 21, 2013, the recall got under way. Southeast Toyota can be reached by owners at 1-800-301-6859.
Visibility: Power window devices and controls
Certain Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD, and Pontiac Vibe vehicles from the model years 2007 to 2009 are being recalled by Toyota. Some of these vehicles’ power window master switch assemblies were constructed utilizing a less exact method for lubricating the switch assemblies’ interior parts. The power window master switch assemblies may malfunction and overheat as a result of irregularities in this lubricating procedure.
Toyota will inform the owners, and dealers will inspect the switch and, at no additional cost, either replace any switches that have been harmed by the problem or apply a special lubricant that prevents heat buildup. If a switch malfunctions, Toyota owners should seek professional assistance instead by calling their local Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. Owners of Pontiac Vibes who are subject to this recall will be contacted by General Motors, and GM dealers will examine and repair switches as necessary. Call Pontiac Customer Care at 1-800-762-2737 to speak with one of these owners.
Exterior lighting: Brake lights: Switch
CERTAIN MODEL YEAR 2009 CAMRY AND MODEL YEAR 2009-2011 TOYOTA VEHICLES ARE BEING RECALLED Vehicles built by Venza between October 20, 2008, and January 4, 2011, and between July 1, 2008, and February 28, 2009. SILICONE GREASE MAY HAVE COME IN CONTACT WITH THE SWITCH’S SURFACE DURING THE CONTACT-TYPE STOP LAMP SWITCH’S ASSEMBLY, CAUSING CONTACT RESISTANCE. A NO START CONDITION COULD result, the shift lever might not move from the “park” position, or the vehicle’s brake lights might stop working if this happens. WARNING LAMPS COULD ALSO ILLUMINATE.
THE RISK OF A CRASH WOULD INCREASE IF THE BRAKE LIGHTS WERE INEFFECTIVE AS THEY WOULD NOT WARN OTHER TRAVELERS THAT THE VEHICLE IS SLOWING OR STOPING.
Owners will be notified by Toyota, and dealers will replace the stop lamp switch at no cost to the customer. 2012’s early April is anticipated to see the start of the safety recall. Toyota can be reached at 1-800-331-4331.
Equipment: Other: Labels
FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, “TIRE SELECTION AND RIMS,” GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 VEHICLES. THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008.
The certification label, the tire and loading information label, and the load carrying capacity modification (addendum) label will all be replaced by dealers at no cost to the customer. THE OWNER’S MANUAL WILL ALSO BE CORRECTED BY DEALERS. It is anticipated that the safety recall would start in May 2010. GULF STATES TOYOTA CAN BE CONTACTED BY OWNERS AT 713-580-3300.
Vehicle speed control: Accelerator pedal
THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION IN CERTAIN MODEL YEAR 2004-2010 PASSENGER VEHICLES DUE TO IT BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER’S FLOOR MAT.
A CRASH, SERIOUS INJURY, OR DEATH COULD RESULT FROM A STUCK OPEN ACCELERATOR PEDAL DUE TO VERY HIGH VEHICLE SPEEDS AND DIFFICULTY TO STOP THE VEHICLE.
TOYOTA WILL MAIL A SECOND NOTIFICATION TO OWNERS OF AFFECTED VEHICLES NOTIFYING THEM OF THE FREE REMEDY WHEN IT IS AVAILABLE. THE FIRST NOTICE IS EXPECTED TO BE MAILED DURING OCTOBER 2009 AND TOYOTA WILL ADVISE NHTSA OF THE ESTIMATED DATE WHEN THE REMEDY PARTS WILL BE AVAILABLE. OWNERS MAY CONTACT
THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS. SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006-2009 SIENNA PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY
The recall is anticipated to start in May 2010, and dealers will replace the load carrying capacity modification (addendum) label free of charge. SOUTHEAST TOYOTA CAN BE CONTACTED BY OWNERS AT 1-954-420-2000.