Depending on the engine choice, the 2022 Toyota Camry can hold 4.8 or 5.7 quarts (4.54 or 5.39 liters) of engine oil.
In This Article...
Automatic Transmission Oil Capacity
Depending on the automatic gearbox, the 2022 Toyota Camry can hold 7.8 or 7.7 quarts (7.38 or 7.29 liters) of automatic transmission oil.
What volume of oil can a V6 Camry hold?
For instance, a 4-cylinder engine needs at least 5 quarts of oil, whereas a 6-cylinder engine needs about 6 quarts.
What volume of fuel does a 2012 Toyota Camry V6 consume?
The 2.5L and 3.5L engines are available for the 2012 Toyota Camry. The 2.5L (153 cc) engine requires 4.5 quarts of SAE 0W-20 oil to be used. The 3.5L (211 ci) engine requires 6.4 quarts of SAE 0W-20 oil to be used.
You can use the typical SAE 5W-20 oil for one oil change if the lower viscosity oil is not readily available. Make sure SAE 0W-20 is on hand the next time you get your oil changed.
Depending on the oil you use, you need to replace your oil every 3,000 to 10,000 miles. If you use synthetic oil, you can wait longer.
How much Toyota Camry engine oil do I need?
The majority of engines need between 5 and 8 quarts of oil. For instance, a 4-cylinder engine needs at least 5 quarts of oil, whereas a 6-cylinder engine needs about 6 quarts.
How much oil is required for a Toyota Camry?
Depending on the engine and model year, the Toyota Camry can hold between 3.8 and 6.4 quarts (3.6 and 6.06 liters) of engine oil.
A 2013 Toyota Tacoma V6 holds how much oil?
The 2013 Toyota Tacoma 4.0L recommends using AMSOIL OE Synthetic Motor Oil since it is specifically designed for the longer oil change intervals. Longer than the conventional 3,000-mile oil change interval, it includes innovative synthetic technology that resists chemical breakdown for ultimate wear protection for your car.
RWD XRUN, 4.8 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
RWD PRE, 5.5 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
RWD Base, 4.8 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
What is oil 10W-30?
Engine oil with the designation 10W30 has a viscosity rating of 10W when the engine is cold and 30W when the engine is hot. This is distinct from oil with a 5W30 designation, which has a thinner viscosity when the engine is cold.