The SAE 0w-20 synthetic oil that the Tacoma uses. The 3.5L (211 ci) V6 engine holds 6.1 quarts, whereas the 2.7L (164 ci) 4 cylinder engine stores 6.2 quarts (6.2 with a tow package).
In This Article...
How much oil does a 4-cylinder Toyota Tacoma require?
For instance, a 4-cylinder engine needs at least 5 quarts of oil, whereas a 6-cylinder engine needs about 6 quarts.
A 2013 Toyota Tacoma V6 holds how much oil?
The 2013 Toyota Tacoma 4.0L recommends using AMSOIL OE Synthetic Motor Oil since it is specifically designed for the longer oil change intervals. Longer than the conventional 3,000-mile oil change interval, it includes innovative synthetic technology that resists chemical breakdown for ultimate wear protection for your car.
RWD XRUN, 4.8 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
RWD PRE, 5.5 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
RWD Base, 4.8 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.
The Toyota Tacoma V6 uses what kind of oil?
Oil filter, hardware, and 6 liters of 5W-30 Toyota Tacoma engine oil for 4.0L V6 applications. Enhanced engine protection with Ravenol CleanSynto oil technology.
The 2006 Toyota Tacoma V6 uses how much oil?
The owner’s manual for the 2006 Toyota Tacoma specifies that 5W-30 weight oil be used. Neither synthetic nor traditional are explicitly preferred. An oil and filter change for the 2.7L (164 ci) 4-cylinder engine consumes roughly 6 quarts. Between 4.5 and 5 gallons of oil will be used by the 4.0L (241.41 ci) V6. Four-wheel-drive and Pre-Runner models will use an additional half pint.
You might want to know if you can use a different quart of oil in your 2020 performance sports sedan now that you know the quick answer. This concise and informative FAQ will teach you more about different types of oils and how they function.
What kind of oil is suggested for a Toyota Tacoma?
Which is better for your Toyota Tacoma when it comes to oil changes or additions? The best oils on the market were identified because we want to ensure that you give your Tacoma the greatest care possible. Below are our conclusions.
Toyota Tacoma requires 5W-20 and 0W-20 oil, both of which are readily available on the market. Selecting an API-certified engine oil might help if you want to make sure the oil you use is good for your Toyota. Despite the fact that there are many great non-certified oils available, API certification might provide you piece of mind while lubricating your motor. The top seven oils for your Toyota Tacoma are shown below:
- Castrol Edge Advanced Full Synthetic SAE 0W-20 Extended Performance
- Extended Performance Full Synthetic 5W-20 from Mobil 1
- Advanced Full Synthetic 0W-20 Valvoline
- Platinum Full Synthetic 0W-20 Pennzoil
- Full Synthetic Shell Rotella 5W-20
- New Generation Liqui Molygen 0W-20
- SAE 0W-20 Royal Purple
You still have a lot to learn about properly maintaining your Toyota Tacoma. Continue reading to learn how to check your Tacoma’s oil, how many quarts are required, where to locate the filter, and other topics.
The amount of oil a 2015 Tacoma v6 consumes
Capacity: 4WD, 5.5 gallons with filter After refilling, check the oil level. RWD PRE, 5.5 quarts with filter After refueling, check the oil level. If necessary, top off the proper level.