There is a technique to reset the liftgate on your Toyota Highlander if it is giving you problems. Therefore, try this reset method first before taking it to the Toyota shop for repair. It simply takes a few minutes and is simple to complete.
To reset the liftgate on your Toyota Highlander, do the following:
- Put your car in park and turn it off.
- Head to the Highlander’s back.
- Liftgate button should be pressed.
- Open the liftgate.
- The liftgate button should be pressed and held.
- After pausing for a moment, it will beep twice more.
- Reopen the liftgate after it has been closed.
- The liftgate of the Highland has been reset.
By adjusting your Toyota Highlander’s liftgate back to the default position, you might have avoided a trip to the dealer and a significant repair expense. We will explain the need to reset the liftgate in this article and provide step-by-step instructions.
Continue reading for answers to more frequently asked questions about the Highlander.
In This Article...
How do you reset the Toyota Highlander’s back door?
You always count on the power rear door to open easily for you. It can fail occasionally, which is disappointing.
The rear liftgate closure button can be pressed and held down to solve this issue quickly. It will beep repeatedly before releasing. In most circumstances, doing so will reset the liftgate and enable it to function properly.
In circumstances like this, it can be difficult to know what to do. We’ll explain that information in more detail now and let you know what to anticipate if your liftgate isn’t functioning properly. For further information and assistance, you may also look up the vehicle history.
How can I restart my power liftgate?
- As soon as you are 6 feet away from the rear of your car, the logo projection will automatically turn on.
- Kick directly over the logo or, for earlier vehicles, at the sensor. Note: The sensor will not be activated by kicking straight within 5 inches of the bumper, sweeping the foot from side to side, or stepping on the projected logo.
- You will have time to safely exit before the liftgate opens. When the liftgate opens, the rear lights will flash and a chime will ring to let you know.
The liftgate can also be closed by kicking it:
- Kick directly at the sensor for earlier vehicles or over the projected logo.
- The liftgate will close after a 2-second delay, at which point the back lights will flash and a sound will chime.
I need to reset the Toyota liftgate.
Power liftgates are available on Toyota Highlanders. This practical feature makes it possible to open and close the liftgate without having to lift it yourself.
The power liftgate, however, is susceptible to failure just like any electrical component. When this occurs, the liftgate might not operate properly or you might notice an error message on the dashboard.
Additionally, the Toyota Highlander liftgate’s settings could have been altered by a staff member at the dealership or the prior owner. Therefore, by resetting the power liftgate, you can make the necessary adjustments if you discover that the liftgate opens too high or low.
The Toyota Highlander power liftgate may be reset with moderate ease. Take these actions:
Park your vehicle and turn it off
The Toyota Highlander needs to be parked in an open space first. Turn off the engine after parking the car. You should do this in your garage or driveway.
Let the liftgate open
For this reset technique to function, the liftgate must be left open. For instance, the power liftgate on the Highlander might not open if it was adjusted to a different height.
Do not attempt to push it open; just leave it alone. You don’t want to harm the power liftgate on the Highlander.
Press and hold the liftgate button
There will be an additional liftgate button available now, which is used to close the liftgate. Hold down this button for approximately 10 seconds.
Four beeps should be followed by a pause, then two more beeps. This indicates that the reset was effective. Restart your attempt at the beginning if you cannot hear the beeps.
Close the liftgate and open it again
Release the button once you’ve heard the beeps. After that, shut the liftgate and then reopen it to make sure the reset succeeded.
The liftgate will open and then halt if it is reset. The liftgate can also be adjusted to a particular height. Let’s look at how to go about doing that.
Why won’t my power liftgate operate?
At Texas Hydraulic, we provide a fully stocked and equipped repair facility manned by a highly qualified group of technicians. But before you visit our Dallas-Fort Worth full-service repair facility, you might opt to try to solve the problem on your own.
We completely get, which is why we have written the guide below for troubleshooting the hydraulic liftgate on your truck. Here are a few of the most frequent causes of a malfunctioning box truck liftgate.
The next most likely culprit, if your motor is operating and everything else appears to be in working order, is low battery voltage. To determine whether the battery is the problem, try using a booster. As advised by the manufacturers, always make sure the truck is running before using the liftgate. If the booster doesn’t fix the problem, you could need to replace the battery; in that case, it’s advisable to seek out experts for OEM parts and skilled installation.
Make sure the hydraulic reservoir oil level is within the permitted range for your particular model by checking the level. If the level is too low, it will be difficult for the gate to raise itself to deck height. The suggested fluid level can be found in the owner’s manual for your liftgate. The liquid will purge from the reservoir’s breather cap if the tank is overfilled. Run the gate several times to drain all extra fluid.
If the problem is a squeaking sound, it is probably due to a lack of lubrication or issues with the power unit’s internal gears, pulleys, or sprockets. For chains or pivot points, try using a lubricant made for lift gates. If that doesn’t address the problem, you might need to rebuild or replace the pump.
How can my Highlander trunk 2021 be reset?
Press and hold the rear liftgate close button until it beeps four times with the liftgate open and immobile (button is located on the door jamb of the rear liftgate, and only accessible when the liftgate is open). Hold on to it until it beeps one more, then release. Snap the liftgate shut.
Can you manually open an electronic tailgate?
To manually open the tailgate, you must crawl inside the car, remove a plastic cover from the interior, and operate the opening lever. Whether you have a power tailgate or a manual tailgate, this is the same as the previous generation.
Can the electric liftgate be manually closed?
Press the button on the left side of the liftgate’s interior to close it. Press the button again to stop it. The door will automatically close if you begin to manually lower the liftgate while it is open.
A power liftgate can be opened manually, right?
You can manually push the liftgate up to the maximum open position to fully open it while using the motorized liftgate after programming a lower height than fully open.
How is a tailgate adjusted?
Orienting the tailgate:
- Right and left pickup box side hinge bolts (1) should be loosened.
- If necessary, use shims (2) on both sides.
- Each side’s bolts (1) should be hand-tightened.
- Adjust fit and flushness both up-down and fore-aft before closing the tailgate.
- Tighten the bolts after opening the tailgate.
On a rav4, how do you reset the lift gate?
Open the liftgate, then manually adjust the height to your liking. Once everything is in place, press and hold the INSIDE button for 3 seconds or until the system beeps twice, and then let go. To confirm the height modification, restart the Power Liftgate System.
How can you change the Toyota Highlander’s trunk height?
Have you just lately purchased a brand-new Toyota with a motorized tailgate? Perhaps you’re wondering how to make adjustments and reset it. To get the most use and enjoyment out of your car, it’s critical to understand how it works. Here is a step-by-step tutorial that explains how to carry it out.
How to Use the Toyota Power Liftgate:
- The trunk button, which is adjacent to the steering wheel, can be used to open or close the liftgate.
- Press the button once more to stop the gate from moving once it has begun to move. With this capability, you can adjust the liftgate’s height to suit your needs.
- Press the button one more to close the liftgate.
- Utilizing the button on the liftgate itself is an additional choice. Press the button at the liftgate’s bottom after opening the liftgate while you’re outside the car. At various heights, this button shuts the gate. To fully open the gate once more, press the button once more.
- To completely close the gate, use the handle, the liftgate button, or the button on the key fob.
How to Adjust and Reset Toyota Power Liftgate:
- Make sure your car is off, then head to the back of it to adjust the liftgate to the height you desire.
- The gate can be raised or lowered to the desired height.
- Press and hold the power lift button while deciding on your ideal height until you hear four beeps.
- It is now set for the power liftgate height.
Check out the video below for instructions on how to adjust your liftgate height from your car’s dashboard.