Push and hold the odometer button on your dashboard briefly, then quickly turn your key to the second position. Hold the odometer button down for a further 10 seconds. The maintenance light should flash and you could hear a beeping if everything is done correctly. Your Toyota Camry’s maintenance light ought to go out after doing that.
In This Article...
How can you turn a Toyota’s maintenance needed light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
On a 2014 Toyota Camry, how do you reset the maintenance light?
- Position the ignition so that it is on.
- By pressing the trip control button in the instrument panel’s lower right corner, you can set the odometer to trip A.
- Switch off the ignition.
- Place a firm grip on the trip control button.
- Without releasing the trip control button, turn the ignition to the On position.
- Hold off until the trip meter reaches zero.
How can you turn off the Toyota Camry 2020’s maintenance-needed light?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for another 10 seconds or so. You should begin to notice the maintenance light flashing and possibly hear a beeping. The light ought should thereafter go out.
On a 2016 Toyota Camry, how do you reset the maintenance light?
Push the odometer button on the dashboard quickly and hold it there while turning the key to the second position. You should see the maintenance light blink if you hold down the odometer button for roughly 10 seconds. Also possible is a beeping sound. The light should then turn off at that point.