Therefore, the timing belt or chain is in charge of synchronizing the crankshaft and camshaft of the engine. This enables smooth engine operation and prevents engine damage by enabling the pistons and valves to move at the proper timing. The engine cannot function properly and may possibly sustain significant internal engine damage if the timing belt or chain fails.
Over the years, Toyota has used both timing belts and chains in their vehicles. However, since 2005, Toyota has primarily used timing chains in their automobiles. Even though they can be noisier and require adequate maintenance, timing chains can survive for a very long time, so owners won’t need to replace them regularly. Timing belts, on the other hand, don’t need as much upkeep, but drivers must replace them more frequently after around 65,000 miles. Before 2005, Toyota mostly used the timing belt in its vehicles.
We hope the list above has made it easier for you to determine whether your Toyota has a timing chain or belt.
In This Article...
Should Toyota timing chains be changed?
While everyone is aware that a car’s timing belt needs to be replaced at suggested service intervals, what about the timing chain? What distinguishes a timing belt from a chain? A timing belt is a toothed belt that travels outside of the engine and is constructed of high-quality rubber. It is protected by a cover.
A bicycle chain-like timing chain is constructed of metal. Because it requires engine oil for lubrication, a timing chain operates inside the engine. Depending on the vehicle, a timing belt normally needs to be replaced between 40,000 and 100,000 kilometers. The fix costs a few hundred dollars. It is not necessary to replace a timing chain unless there is an issue with it.
Does the timing chain have a mechanical immunity? No, it is not, is the clear-cut response. Timing chain issues are prevalent, particularly in automobiles with heavy mileage.
A timing chain can wear out just like any other moving mechanical part within an engine. The engine oil lubricates a timing chain. The timing chain can wear down more quickly due to insufficient oil changes, low oil levels, or bad oil quality.
A chain tensioner maintains the correct tension on a timing chain. An oil pressure or spring-loaded device could be used to run a chain tensioner.
How long do Toyota’s timing belts last?
Although they can last up to 100,000 miles, it’s always a good idea to change them before that. The valves, pistons, and other internal engine components can sustain significant damage in the event of a belt failure.
How many miles is the lifespan of a Toyota timing chain?
The timing chain should be changed between 80,000 and 120,000 miles, barring a specific defect. Chain issues are common in vehicles with higher mileage. Watch for indications that the timing chain is failing if you have an older or high-mileage vehicle. It’s crucial to be able to identify the symptoms and get the timing chain serviced before it completely fails since the timing chain may break and need to be replaced.
Timing belts or chains: which is superior?
Timing belts typically last less time than timing chains. Timing belts are made of rubber, which isn’t as strong as metal, but chains are made of metal, and this is the simple explanation for why this is the case. Timing belts are not weak, but they will probably need to be replaced at some point, whereas a chain can last the lifetime of the car.
Timing belts typically need to be replaced in the mileage range of 55,000 miles (about 90,000 km) and 90,000 miles (roughly 150,000 km). Therefore, a timing belt is still a very reliable and significant component of your car.
Whether your car has a timing chain or belt, it’s critical that you watch for any symptoms of wear and strain and take appropriate action. Depending on the sort of engine you have, a broken timing belt can have disastrous results. You could be better off searching to get a new vehicle if the repairs are too expensive to be practical.
What Toyota models come with timing chains?
The 2020 Toyota Corolla, 2020 Toyota RAV4, and even the 2020 Toyota Yaris all have timing chains rather than timing belts as standard equipment.
What is the price of a timing chain?
Being proactive is a good thing because an engine that has a broken timing chain could suffer significant damage.
Timing chain replacement might cost between $600 and $800 to do it yourself or $1,600 to $1,800 to have a technician do it. Due to how difficult it is to replace this element, the price is exorbitant.
The parts for a DIY timing chain replacement will run you about $650. But this is a job that’s best left to mechanics with a lot of experience.
Fortunately, timing chains are built to endure the lifespan of the vehicle, unlike rubber timing belts, thus it is rare that you will need to have it changed. Watch out for these signs if you think your timing chain may be broken:
- Noisy timing chain
- Starting the car is challenging.
- While idling, the engine shakes or vibrates
- Engine has poor performance or is misfiring
- The check engine light is on.
Bring your car to a repair as soon as you can if any of these symptoms persist. Quickly addressing the problem will stop further harm to your car.
Save money on other auto expenses, such as car insurance with Jerry, to make place in your budget for unforeseen auto repairs. In just a few seconds, the Jerry app can quickly scan rates from more than 50 of the best insurance providers, including Travelers, Nationwide, and Progressive! Once you’ve decided, they even assist you in canceling your old coverage.
With Jerry’s assistance, you may uncover $887 in annual savings on auto insurance and save time!
A timing belt’s lifespan is 200 000 miles.
That concludes our examination of the timing belt’s nature, operation, and significance. Can a timing belt travel more than 200 000 miles? Not at all. And to be honest, unless you have a junker that you don’t mind giving up, you really shouldn’t try this out in person. Expect severe engine damage if you continue to drive your automobile with a timing belt that is worn out, installed incorrectly, or otherwise flawed.
The cost of replacing your timing belt is by no means a cheap one. You’ll have to pay several hundred dollars, or in some cases nearly or more than a thousand. But this is little compared to the $2,000, $3,000, or even higher needed to rebuild a broken timing belt-related engine that has failed. Who would have thought that this tiny piece of rubber could fail and give you such heartache?
How long does it take to change a Toyota’s timing belt?
It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.
Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.
What You’ll Need to Replace the Water Pump and Timing Belt
- Wrench socket set
- tools for driving screws, such as Philips and slot drive
- Set of Allen keys
- jar or bucket (for collecting coolant)
- bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
- leather gloves
- Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
- a fresh timing belt
- a fresh water pump
- new antifreeze/coolant
Step 1: Preparation
Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:
- To reach the undercarriage beneath the engine, jack up the front of the automobile.
- Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
- Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
- Before starting, make sure the engine is entirely cool.
- To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.
Step 2: Removing the Belts
You must first remove the fan belt and power steering belt because they are located next to the cover that protects the timing belt and water pump. To remove the belts, take the following actions:
- The fasteners holding the alternator in place should be loosened. The fan belt can then be removed by lightly tapping it.
- To access the timing case and crankshaft pulley, do the same with the power steering belt by moving it aside.
- Crankshaft pulley: Loosen. To access the engine and remove the bolt, you’ll need a long wrench arm.
Timing belts or chainswhich lasts longer?
Prior to making a purchase decision, you may be examining the specifications of various cars. What is the displacement of the engine? What type of brakes is it equipped with? How is the transmission handled? Exists a long-range AEB with it? Before making a decision, there are several factors you can compare between each car. We’ll be discussing timing chains and belts today.
The camshaft and crankshaft rotations are synchronized using timing chains or belts. As a result of the Overhead Cam (OHC) arrangement used by the majority of modern engines, the crankshaft and camshaft must be connected by a belt or chain. Timing belts or timing chains are also necessary for engines with push rod configurations (although shorter in length).
Some contend that the greater lifespan of timing chains makes them superior. Some contend that the cheaper replacement costs and quieter operation of timing belts make them superior. The problem is that when buying a car, you cannot select whether it will have a timing chain or belt. If you liked one timing system over the other, you’d have to purchase a new vehicle.
Consider a Perodua Myvi and a Proton Iriz as examples. An Iriz has a timing belt, whereas a Myvi has a timing chain. Does that mean that one car is better than the other? Does one require less upkeep than the other?
A: Timing chains outperform timing belts in strength. Timing links are also more durable. Timing belts are more affordable, simpler to replace, and quieter than timing chains.
A: Yes. usually only slightly. Since the gear teeth are worn out as well, fixing the timing chain also necessitates changing certain gears. Timing chains, however, do not require as frequent replacement as timing belts.
A: Yes. The engine oil must lubricate the timing chains. As a result, they live in a more contained structure. Consequently, it will take more effort to reach the timing chain. Timing belts are easier to service because they often only have a plastic cover to protect them.
A: Yes. The sprockets and gear teeth mesh. Over time, the chain stretch lengthens and the gear teeth begin to wear out. They eventually need to be replaced. A timing chain replacement does not, however, have a set replacement interval.
When the timing chain stretch could potentially harm the engine, the engine warning light will typically on. If that happens, turn off the engine. Chain strain could result in the chain jumping a gear tooth, throwing off the timing of the pistons and valves and resulting in some rough idling.
A: Yes. They must be replaced as a result around every 100,000 kilometers. Timing belts that aren’t maintained could rupture and seriously harm the engine (especially interference engines). Teeth that are worn down could potentially cause timing belts to slip.
What is the worst thing that could happen if the timing chain or belt breaks?
This is true for interference engines, which are smaller and more effective in their design. Timing belts tend to snap more frequently, although in most cases, if you change them on schedule, this issue shouldn’t arise.
A combination. A timing belt is used by an earlier RB26DETT. A timing chain is used by more recent VR38DETTs.
Timing belts and chains aren’t even used in some vehicles, like the Ferrari Enzo. Instead, they synchronize the valves with the engine rotation using a number of timing gears. Compared to timing chains, timing gears are louder.
To sum up:
- Timing chains are more expensive than timing belts but have a longer lifespan.
- Using one over the other has no impact on performance or fuel economy.
- Timing belts were mostly used in autos due to their lower cost. They function just as well.
- Timing chains may sag over time, resulting in gear teeth that “jump.”
- Teeth on timing belts can wear out and move. Timing belts are also more susceptible to breaking.
- Timing belt or timing chain failure can have disastrous effects on the engine.
- The lower operating noise of timing belts is an additional advantage.
No matter what type of timing system your car has, you should undertake routine maintenance to keep an eye on the condition of your timing belt or chain.