The warranty on any parts impacted or harmed by the raise kit will be void if you lift your truck over 2 inches (or at all for some models, including Toyota). However, coverage will continue for anything not connected to or impacted by the lift kit.
According to the MOPAR Extended Warranty, lifting/suspension packages for RAM cars are as follows:
The following losses or expenses are not covered by the plan and are not applicable:
Repairs necessary as a result of alterations or modifications made to the vehicle that were not authorized or advised by the maker, such as, but not limited to: (a) failure of any aftermarket or custom part (unless specified as a specific covered part); (b) changes made to the engine, transmission, or drive axle, including any performance changes; (c) Oversized or undersized tires; (d) any alterations to the frame or suspension;
lift kits larger than two inches; repairs to covered components caused directly by a lift kit failure larger than two inches;
Therefore, they will still be covered if your A/C unit breaks down or your head gasket leaks. However, we do not advise lifting your brand-new 2020 RAM 1500 or 2020 Jeep Gladiator any higher than the manufacturer’s recommended 2 point. Until the warranty expires, at least.
In This Article...
Want a truck you CAN lift?
We have a large selection of dependable, reasonably priced, and safe to lift trucks at Turpin CDJR. View our selection, and if anything catches your eye, give us a call.
Does installing a leveling kit nullify the warranty?
A leveling kit would just nullify that portion of the suspension. They wouldn’t cover those parts if your tie-ride ends or ball joints prematurely wear out. They would claim that the leveling kit’s stress was what caused the harm. They must show that your mods are to blame for the issue.
What changes void the Toyota warranty?
The warranty coverage on your vehicle may be negatively impacted by the installation of race or off-highway use parts. The installation of Race or Off-Highway Use Parts on a vehicle, as well as any malfunctions they might cause, are not covered by the car warranty.
Is the Toyota warranty voided by aftermarket lifts?
No, the guarantee won’t be voided as long as the frame isn’t cut (and you aren’t at 2″). They must demonstrate that the installed part was the root of the problem in order for anything to void the warranty.
Lifting my Tacoma voids the warranty, right?
Warranty is not voided by lifting. They won’t replace the OEM part if the aftermarket item contributed to the failure of an OEM part, but the guarantee is still valid.
Will lifting my truck void the warranty?
It does not follow that you cannot purchase a lifted truck with a warranty just because installing a lift kit yourself voids the guarantee on your new truck. A lifted kit purchased from a licensed dealership does not void the warranty. In this situation, the manufacturer that provides the guarantee may be able to control or restrict the alterations. They can therefore continue to have faith that their car will continue to work as it did at first. This enables them to confidently offer the warranty.
The key lesson here is that you should purchase a raised truck from a dealership rather than modifying it yourself if you want warranty protection and want to have a lifted truck.
This is also a wise choice in terms of security. During the installation of the lift kit, an untrained person could easily make mistakes that result in immediate or long-term damage as well as possible injury. In contrast, specialists with the necessary skills install the lift kit before selling it through a dealership. They can do this without making mistakes. For instance, the “rookie suspension technician” at Rocky Ridge has already finished 1,000 installs. The normal person cannot even begin to comprehend this sensation. Professionals spend a lot of time making sure they are up to date with laws and trends in order to provide high-quality service as a supplement to this.
Lifted Parts Have Warranties
The news is even better if you buy your lifted truck from a dealership and are covered by a warranty. On their kits and parts, the big businesses like Rocky Ridge and AEV provide warranties. This implies that you will be able to benefit from the warranty on the converted parts in addition to the warranty provided by the vehicle’s original manufacturer. The majority of Trucks and Jeep Rocky Ridge packages come with a 3 year/36,000 mile warranty.
Having Warranty Service Done
Given that the lifted truck you purchased from a dealership comes with a warranty, you may be wondering where to take it for warranty servicing or any other type of maintenance. Remember that elevated trucks are not commonly used by mechanics. This is due to the fact that they are less frequent than other types of vehicles. When making repairs or providing services, this unfamiliarity may result in blunders. Or it can result in the mechanic in question failing to see a possible problem that an expert in raised vehicles would immediately recognize.
As a result, you ought to always take your raised truck to a mechanic with knowledge of elevated cars. Any manufacturer-approved service facility can perform maintenance on your Rocky Ridge car while it is still under warranty. Always take your car to the dealership where you made the initial purchase, is our advice. By doing so, you can make sure they are a legitimate dealership and are knowledgeable about your car. Additionally, they will have on hand all necessary documentation and details on your truck and its warranty.
You will have the chance to ask any remaining concerns concerning the warranty coverage before you buy your lifted truck, clearing up any confusion in your mind.
Will my truck be damaged by a 2 inch leveling kit?
Truck leveling kits are made to lift the vehicle’s body off of its axles. As a result, it will be possible to install a bigger tire there or increase the amount of ground clearance. The truck’s front will be raised somewhat by your hardware to match the height of the back, which is stock. The majority of kits will offer a front lift that is no more than two inches high.
Your truck leveling kit can be used in conjunction with your rear leaf springs and space blocks to provide all four corners a small elevation if you desire a stock-style stance. The majority merely require torsion keys or spring spacers to produce the desired results.
This outcome is in contrast to a lift kit, which might raise your truck significantly higher. It takes new suspension systems, control arms, shocks, and other equipment to add up to 10 inches (or more) of height, and they come in a variety of sizes and designs. It is common for a truck lift kit to also require a new driveshaft.
These are the benefits and drawbacks to take into account if you are debating installing a truck leveling system for your car.
List of the Pros of a Truck Leveling Kit
1. You can use larger wheels than standard on every corner.
A truck leveling kit’s most important benefit is that it enables you to run wheels that are bigger than stock at all four of your corners. Most cars already have enough clearance in the back to allow for this, but without this upgrade option, the front bumper or fender gets in the way when turning. You may stop the rubbing problem and get the clearance you need for your activities by building a modest lift that aligns the front and back of the vehicle.
2. It enables you to operate machinery on the truck’s front.
A truck leveling system will provide you with the extra support you need if you need to install a winch on the front bumper or run a plow at the front of your truck as a side job. The additional weight of these extra components may cause the front of the truck to sag, which may result in the front wheels rubbing against the front fender or bumper. Even if the front end of the vehicle is overextended for another purpose, such as having a hitch in the back to tow a fifth-wheel, you can use this option to improve the vehicle’s performance from the back end.
3. With certain makes and models, the sag-to-flat problem can be avoided.
The majority of American automakers produced trucks with a significant sag in the back during the 1980s and 1990s. The vehicle’s structure might practically drag on the ground if you started to transport anything. Businesses like General Motors started to address this problem by positioning the front end somewhat lower than the back. In this manner, the driving experience while hauling something could be made more comfortable rather than having a heavy load raise the truck’s nose high.
If you don’t typically tow or haul anything with your car, you can fix this problem by installing a truck leveling kit. In order to reduce stress on other suspension components, you can also relieve part of the weight that is put on the front end.
4. It lowers the amount of braking force applied during an emergency stop.
When a vehicle is lower in the front than the back, the higher rear end can cause handling problems when it isn’t loaded, which can make it harder for you to stop in an emergency. With a truck leveling system, you can increase balance and lessen the strain on the front suspension and brakes. Since the taller bed is no longer an issue, you’ll enhance your cornering weight and emergency braking even if this may provide some additional stress points to other parts of the car.
5. A truck leveling system won’t affect the vehicle’s static weight balance.
The static weight balance of the truck will not be impacted by the action you take to level it. The Ford F350 over the F250 model is the standard illustration of this advantage. Because of its taller block, the F350 is typically around two inches higher, but a leveling kit rakes it much like the other model. You can rapidly and easily make the needed improvements because the install is typically more simpler and because this balancing process doesn’t require any other significant changes.
6. Not every make and model experiences an increase in fuel efficiency.
The aerodynamic profile of the truck changes after adding a leveling kit, which is one of the drawbacks that many truck owners experience. As you drive, especially at highway speeds, there may be additional wind resistance if you lift the nose upward. With this benefit, Dodge trucks will provide you with additional wheel travel and prevent the mileage efficiency losses that you can observe from other manufacturers. Some models may even see greater mileage because of the strong frontward slope, which requires the engine to operate with less effort.
7. A vehicle leveling kit results in improved handling.
Go-fast trucks frequently elevate the nose of their car because it improves handling in turns. With the 2-inch balance this equipment gives you, you won’t need to make a significant modification, but the way the car handles differently when it is empty. Because of this, if you don’t frequently tow or move hefty goods, this alternative works well. Installing this option often has benefits that outweigh most of the drawbacks if all you need the bed for is the occasional heavy load.
8. As you balance the truck, you will lift your running boards.
Some vehicles with low running boards as part of their design may benefit from a few extra inches of clearance. For certain drivers and passengers, the extra step up can be helpful, but if you drive off-road without it, these components can soon get destroyed. Although a lift kit would be more advantageous in this situation, you can save money by first attempting to level your car.
List of the Cons of a Truck Leveling Kit
1. It doesn’t alter the truck’s overall appearance.
Some truck owners invest in a leveling kit in the hope that it will significantly alter the way their vehicle looks. The outcome is hardly noticeable because the majority of these goods will only allow you two inches of clearance. To get the extra height that is frequently desired, you must have a lift kit. The goal of this product is to promote balance. If you don’t take this drawback into account before making a buy, you can discover that the equipment you obtain is a financial waste given the outcomes you desire.
2. There’s a chance you might void your car’s warranty.
If you recently bought a new truck, the warranty was certainly included in the price and cost anywhere from $2,500 to $7,500. If you make an unauthorized change to the car, it’s not rare for the warranty to be void. Lift kits are frequently mentioned in such definitions. When you’ve made modifications like this to the truck, some dealers could be unwilling to even work on the truck, much less offer a repair if something happens.
For an older model that is past the warranty period, this drawback is irrelevant. To find out if a leveling kit can violate your warranty, check the manufacturer of your truck’s website and/or your owner’s handbook.
3. The suspension on your truck can degrade more quickly.
Additionally, vehicle leveling systems can put greater strain on your suspension system’s parts. Compared to normal wear and tear, the increased tension from the change could cause them to deteriorate more quickly. The user experience can be changed if anything about the performance of these vehicles, which are often constructed to perform in a specific way.
The front CV joints of a four-wheel drive truck will be subjected to greater stresses than usual. Any truck’s ball joints will experience increased wear after front suspension adjustments. This problem can be lessened even if you only add one inch to produce more balance rather than two.
4. It can have a negative effect on your fuel economy.
You alter your vehicle’s overall profile when you install a truck leveling kit. Making this adjustment usually results in increased wind resistance, which makes the engine work harder to produce the same amount of power. As a result, you will use more fuel than you otherwise would. Going up one tire size will reduce your economy by 3 mpg on the highway and 2 mpg in the city, even though the adjustments aren’t significant. Depending on your car and engine, adding the package will raise that figure by 2550%.
5. Your HUD’s readings could be incorrect.
To make sure you are safe and in conformity with local laws, automakers give you information via an odometer, speedometer, and other gadgets. The distance covered by the tire over a full revolution provides the basis for torque, gearing, and traction control. These readings are based on the tire and wheel’s outside diameter. This design flaw causes your speed to appear to be lower than it actually is if you make a change that is significant enough after installing a truck leveling kit.
If you drastically alter your tires, it may affect these settings to the point where you can reduce your truck’s performance. To remedy the problem, it can be beneficial to speak with a skilled installer or your dealership if your leveling kit’s main purpose is to mount a larger wheel.
6. The price of a leveling kit must still be taken into account.
The leveling kit will make your truck stand out from the others in your neighborhood, even if your new wheel and tire combination has adequate clearance to function with your current configuration. Despite the fact that you are saving money by increasing lift, it is common for a kit to cost up to $1,000, depending on your vehicle’s make and model, overall balance, and the caliber of the spacers and fittings it contains. There are some kits out there that will give you up to three inches of clearance, but the majority of solutions only offer a two-inch lift as their maximum.
Verdict of the Pros and Cons of a Truck Leveling Kit
Even after twenty years of development, a truck leveling kit still cannot give the typical vehicle an accurate balance. With this choice, you have the ability to stop sagging or increase the size of the tire you use for particular tasks. Is it really worth giving up up to 10% of your fuel efficiency only to look at a car that is a little bit more level?
If you choose a leveling system with a two-inch height and load your bed with a large hitch or cargo, the back of your vehicle may sag, which could be troublesome. If you transport or tow something, you should have rake in the back or airbags that may hold the back up while driving.
With the benefits and drawbacks of a truck leveling kit, you can enhance the appearance of the vehicle or utilize a wider tire without incurring the cost of a total suspension adjustment. This choice may or may not be required depending on whether you want a working truck, a cruising option, or one that can move quickly.
Will a leveling kit reduce my fuel efficiency?
You’ve probably noticed that the front ends of most stock trucks appear to be slightly lower than the rear ends. You are not seeing things with your eyes. It is referred to as a “rake” and results from lifting the back of the vehicle to reduce sag while adding a large load, reduce wind resistance, and improve fuel economy. If you don’t like this look, you’re not the only one. The good news is that it is not necessary and that raising the front of your truck a few inches will allow it to match the height of the back is simple with a leveling kit. The advantages and disadvantages of installing a front-end leveling system on your truck will be discussed now.
Increases Ground Clearance
Your vehicle’s lowest point determines how high you can stand off the ground. The front-end is typically the limiting element. You will get 1-3 inches of extra ground clearance with a leveling kit. By assisting in preventing pebbles and other debris from harming the underbelly of your car, this is helpful if you intend to off-road. On steep driveways, a taller front-end will help prevent you from bottoming out.
Larger Tires
By installing a front-end leveling kit, you will raise the truck’s body off the axles. This enables you to fit larger tires without being concerned about whether they would scrape when making turns.
Increases Equipment Capabilities
A front-end lift kit will assist balance the weight if you want to mount a winch on the front of your car. By doing this, the front end is kept from bottoming out and the added weight stops the wheels from rubbing the front fender or bumper.
Reduces Braking Pressure During an Emergency Stop
A front-end leveling kit offers greater stability. This lessens the strain on the front brakes and suspension, making it simpler to use the emergency brake in an emergency.
A Decrease in Fuel Economy
The suspension is equalized by installing a front-end leveling kit, which increases wind resistance. Fuel economy is reduced due to the higher resistance and drag. The difference in gas mileage might not be very noticeable, though.
Increased Wear on Suspension
The suspension supports the vehicle’s weight. Incorrect installation of a front-end leveling kit might result in greater wear and tear on the suspension system. The good news is that by hiring qualified experts to professionally install and maintain the leveling kit, this scam may be avoided. New shocks and a complete alignment are included in routine maintenance.
Doesn’t Change the Overall Appearance of the Truck
A lift kit and a leveling kit are frequently confused. A leveling kit, as opposed to a lift kit, won’t significantly alter the appearance of your truck. Only a 3 inch maximum lift is provided by leveling kits for the front end. Typically, this is insufficient to produce a noticeable visual difference.
Void Warranty
Installing a leveling system could violate the warranty on a truck you recently purchased. This is not a problem if your truck is not covered by a warranty.