A Toyota Tacoma cannot be flat-towed, according to the manufacturer. The owner’s manual makes it clear that doing so could seriously harm the transmission. This ban on flat towing applies to the majority of model years.
In This Article...
Can a Tacoma 4×4 be towed?
The simple response is no.
The drive wheels of a car should not be on the ground when being towed, which is why you may occasionally see individuals towing with only two wheels off the ground. This allows the non-drive wheels to roll freely while keeping the drive wheels raised off the ground in a locked position.
The drive shaft spins the gearbox whenever the drive wheel is moving, which can seriously harm the internal gears and be very costly to repair.
When disengaging all of the drive wheels from the drive shaft, which necessitates certain particular modifications on the car itself prior to towing, people only tow all four wheels on the ground. For more information, speak to your mechanic or the dealer.
Your Tacoma is a rear-wheel drive truck, so you can only tow it with the rear wheels off the ground. Make sure the steering wheel is locked in a straight position to prevent it from turning while you’re towing, which could cause your truck to turn erratically, much like when you’re driving in reverse and turning the wheel.
The alternative is to crawl underneath the truck and remove the drive shaft and U-joints, both of which are labor-intensive to remove.
Good fortune.
Can you tow a Toyota Tacoma?
The Tacoma is capable of towing 3500 to 6400 pounds. The V6 engine’s towing power is only increased to 6400 pounds when the Towing Package is added.
Which Toyota models are flat-towable?
For instance, Toyota has a number of vehicles that appear to be perfect for flat towing. The Land Cruiser and the 4Runner are available for intrepid off-road travelers.
Can you flat tow a 2021 Toyota Tacoma 4×4?
I believe that all Gen2 and later vehicles cannot be flat hauled without a driveshaft disconnect. For the same reason, I was considering trading in my automatic for a 4×4. They said any 4WD Tacoma with a neutral setting can be flat towed when I just spoke to them.
Can a 4×4 be towed while in neutral?
When using a car towing trailer, you must tow your vehicle with all four wheels off the ground. The transfer case must be in neutral and the four-wheel-down towing option must be activated in order to tow a four-wheel drive vehicle with all four wheels on the ground.
Which automobiles are flat-towed behind an RV?
Absolutely not! The biggest drawback of flat towing is that many ordinary vehicles cannot be used for it due to problems with various contemporary automobile transmissions. If you attempt to flat-tow a vehicle that isn’t made for it, your transmission could sustain significant damage.
Generally speaking, cars with a manual transfer case and rear-wheel drive, as well as those with four-wheel drive, can be flat towed without risk. Even so, these guidelines don’t always apply. The Motorhome Magazine Dinghy Towing Guide, which covers vehicles made during the previous 30+ years, is the greatest source for finding out which cars are permitted for flat towing.
The owner’s manual of a certain vehicle is the most crucial location to check to see if flat towing is permitted, even after consulting the dinghy towing instructions. Don’t flat tow if it indicates you can’t. or at least not without first altering it. Yes, certain vehicles that can’t be flat-towed can be modified to make them safe to tow. You can read more in this article’s later sections about that.
Can a flat trailer tow a Toyota 4Runner?
The 4Runner, Toyota’s full-size SUV, offers all the dependability one would expect from a Toyota. You could need to haul the 4Runner, either for a road trip or for service. Can the 4Runner be flat towed when the time comes? Here’s the situation after our research:
Flat towing is not permitted with the 4Runner. This might seriously harm the drivetrain, transmission, and other mechanical parts.
The 4Runner can still be towed even though you can’t flat tow it. This article will discuss towing your 4Runner as well as some fantastic, capable RVs. We’ll also examine the Toyota models and years that are towable. Learn more by continuing to read.
Can a flat-towed RAM 1500 be used?
Because of its comfortable ride and effective performance, the Ram 1500 is a well-liked automobile. For those reasons alone, motorhome owners prefer to take it with them on their travels. However, the Ram 1500 can only tow according to a few requirements. We have listed the many methods for towing the well-known half-ton truck for that reason.
Flat Towing
Describe flat towing. When a vehicle is being towed flat, all four of its wheels are on the ground. A different name for it is dinghy towing.
The Ram 1500 4WD versions can be towed flat, which is a simple and effective method, but it necessitates installing some towing equipment first to help connect your truck to the RV. You will require a sturdy base plate for your truck that mounts to an appropriate tow bar attached to the back of your motor home. This tow bar must be fastened to the front of your truck’s chassis.
In order to secure the connection between the two vehicles, it is advisable to think about fastening safety chains. To operate and synchronize the brake lamps on your truck with the motor home, you would also need some electronic equipment. Last but not least, a backup braking system would likewise necessitate that the truck apply its brake while the motorhome brakes proportionately.
You would need to flat tow your truck using the right procedure after installing the towing equipment:
- Start the engine and bring the car to a complete stop on level terrain. Parking brake it on.
- firmly depress the brake pedal.
- Change the gear position to NEUTRAL. In order for the transmission to stay in NEUTRAL when the brake pedal is removed, the driver’s door must be shut (or the driver’s seatbelt buckled). NOTE: Check that the car is set to Normal Ride Height if it has air suspension.
- Push and maintain pressure on the recessed transfer case N (Neutral) button using a ballpoint pen or comparable item (at the center of the transfer case switches). When the N (Neutral) shift is finished, the N (Neutral) indicator light will turn on and stay on. Release the N (Neutral) button once the shift is finished and the N (Neutral) light is illuminated.
- Put the parking brake on.
- Transmitter should be placed in REVERSE.
- Five seconds after releasing the brake, check to make sure the car is still.
- By putting the transmission in DRIVE, repeat steps 6 and 7.
- Change the gear position to NEUTRAL. Parking brake it on. Cut the engine off. Push and hold the ENGINE START/STOP button until the engine turns off on vehicles with Keyless Enter-N-Go. When the engine is turned off, the transmission will automatically choose PARK.
- Switch off the ignition.
- Using a suitable tow bar, fasten the vehicle to the towing vehicle.
- Switch the ignition to the ON/RUN position without starting the car.
- Switch off the ignition.
Dolly Towing
Dolly towing is the process of raising the front or back wheels of your car onto a platform that is hard fastened to the towing car.
The Ram truck’s 2WD variant can only be dolly-towed when the back wheels are elevated. Therefore, you would require a broad enough dolly that could accept and safely hold the back two wheels of your vehicle. Additionally, confirm that the Dolly can support the weight of your large vehicle, whose curb weight ranges from 4800 to 5200 lbs. Additionally, you would need to make sure that the Dolly is set up with brakes that connect to the brakes on your primary vehicle.
You must take the following actions to safely dolly tow your 2WD RAM 1500 after securing all required equipment:
- Ensure that the car is set to Normal Ride Height if it has air suspension.
- Follow the manufacturer’s directions while properly attaching the Dolly to the towing vehicle.
- Put the tow dolly’s back wheels on.
- Parking brake it on. Activate PARK on the transmission.
- Follow the manufacturer’s directions to properly fasten the dolly’s rear wheels.
- Install an appropriate towing-specific clamping device to hold the front wheels in a straight position.
Flat Bed Towing
Tow your automobile flatbed means to put all four of its wheels on a trailer that is being drawn by the towing vehicle.
The RAM 1500 may be safely flatbed towed with both the two- and four-wheel drive variants. It needs a flatbed trailer that is wide enough to hold your truck’s size and weight. Here are the guidelines for flatbed towing your Ram vehicle safely:
- Follow the directions provided by the trailer’s manufacturer to properly fasten the flat trailer to the towing vehicle.
- In accordance with the manufacturer of the trailer’s instructions, drive the truck onto the trailer by lowering it.
- Put the transmission in PARK and engage the parking brake.
- Follow the manufacturer’s directions for properly fastening the trailer’s four wheels to the dolly.
Can you flat tow a 2004 Toyota Tacoma?
A base plate kit, not a front hitch, is what you actually need to flat tow with your 2004 Toyota Tacoma 4WD. Front hitches are not made for recreational towing; rather, base plate kits are made expressly for use while flat towing. You’d need part number 1159-1.