How To Open A Lacie Porsche Design Case?

Porsche / By

Insert a small, flat, narrow, but sturdy knife or other similar tool into the case while it is on its back. Two latches are available for unlocking.

Introduction and Identification

Porsche Design, an Austrian product design studio, and LaCie, a French electronics manufacturer, worked together to create the Porsche Design USB-C Hard Drive. The hard drive is packaged in an aluminum shell with silver, gold, and rose gold accents. You can attach the disk to any computer with a USB connection using the USB-C port on the case.

Unfortunately, it is more difficult to open the enclosure than it is with other drives. But when you remove the casing, you can use a new 2.5″ hard drive to replace the one inside “SSD or hard drive must be 7 mm thick or less. any additional 2.5 “Hard drive cannot be accommodated in the enclosure.

Taking a disk out of an NSM enclosure (s)

  • To identify the hard drive to remove while replacing a faulty disk, navigate to Dashboard > RAID Management (Bottom slot = 1 and Top slot = 2).
  • After opening the enclosure if you’re changing the one, check sure the disks are clearly labeled.
  • Unplug the power supply and shut off the gadget. Before continuing, wait 60 minutes for the unit to cool and relax.
  • Pull the front lip of the casing, particularly in the center where the top shell connects to the bottom plate, to release the Network Space MAX. To carefully separate the top shell from the bottom plate at the center clasp, LaCie advises using your index finger.
  • If disk 2 has failed, carefully remove the top disk from the top bay by releasing the SATA connector. Remove the top disk (Disk 2) if Disk 1 has failed, then remove the bottom disk (Disk 1.) Each mechanism has 4 screws, 2 on each side, which need to be removed.
  • Remove both disks if you’re replacing the enclosure.

Important information

  • Other than the clips, the casing is not bonded or otherwise attached to the gadget. The gadget can be opened with only slight force.
  • Your warranty will be void if you physically harm the device in any way while opening it. The unit cannot sustain any physical harm.
  • Please discuss other choices with LaCie if you are unsure about this surgery.

On a computer, how can I open a LaCie external hard drive?

Start the Windows AutoPlay version of the LaCie Setup Assistant: Your LaCie hard drive can be recognized by Windows AutoPlay as soon as it is attached to your computer. Double-click LaCie Setup if the AutoPlay window displays, then select Open folder to view files.

How is a USB case opened?

Use your forefinger and thumb to pull or push the lid down toward the other end of the drive until the plug is visible while holding the drive in one hand. You should return it and obtain another drive or a refund if you can’t do this effortlessly. Make sure you are not attempting to totally remove the lid.

On a Mac, how can I open a LaCie file?

Choose Utilities > Go from the Finder menu bar. Double-click Disk Utility by going to the Utilities folder. The left column lists every attached storage device, partition, or disk image. from the left column, choose the LaCie hard drive.

How do I use LaCie to repair my Mac?

In order to use a drive with Time Machine, macOS mandates that it be formatted with a particular file system.

  • When creating a fresh backup, utilize Apple File System (APFS) for Big Sur and later.
  • When creating a fresh backup for macOS versions 10.6 (Snow Leopard) through 10.15 (Catalina), utilize Mac OS Extended (Journaled), generally known as HFS+.
  • Switch to System Preferences. Click on the Apple symbol, then select System Preferences, to access System Preferences.
  • Activate Time Machine.
  • Select Disk by clicking the button. A window displaying the attached external storage drives on your Mac appears.
  • Click on the Use Disk option after choosing a drive. The backup disk has now been chosen, and the subsequent Time Machine backup will begin in 120 seconds (2 Minutes).

Items not included in the Time Machine backup strategy (Options):

  • On the Options button, click. A window of choices appears
  • To modify what Time Machine excludes, click the Add button.
  • By selecting them, click the Exclude button. The folder size calculations and adjustments are done at this point.
  • To conclude, press the Done button. Time Machine now sets up the drive and backs up the desired data.

Data recovery from a Time Machine backup:

  • Open Time Machine in Finder > Applications.
  • Opens the time machine. The following are ways to use Time Machine:
  • Right next the Time Machine window, there is a Graphical Timeline.
  • Up and Down Arrows
  • Select the files or folders you want to restore by browsing to them.
  • Select “Restore” from the menu. Attend to any screen prompts that show up (grant Administrative access, etc.)

On my LaCie hard drive, how do I access the files?

Double-click LaCie Setup after opening the LACIE SETUP volume on your desktop. The LaCie hard drive may be recognized by Windows AutoPlay as soon as it is connected to your computer. Double-click LaCie Setup if the AutoPlay dialog displays, then select Open folder to see files using Windows Explorer.

On a LaCie external hard drive, how can I delete a partition?

  • Make that the computer has the storage device mounted and connected.
  • Enter diskmgmt.msc in the Search box. Double-click Disk Management after finding it in the search results.
  • Locate your LaCie device from the list of storage devices in the Disk Management window’s center.
  • To format the partition, it must be accessible. If it is already formatted, choose Delete from the context menu when you right-click on the partition.
  • Right-click the volume and choose New Simple Volume to make a new partition. When the New Simple Volume Wizard displays, follow the on-screen directions.

How can I get my LaCie external hard drive’s files back?

  • Disk Drill can be downloaded, set up, and launched.
  • Click “Search for lost data” after selecting your LaCie drive.
  • Click “Review detected objects” after the scan is finished.
  • Select files using the checkbox column, then select “Recover.”
  • They should be saved somewhere on your PC.

Why won’t my LaCie hard drive appear on my PC?

Does Device Manager list the hard drive? A: Device Manager lists every drive in at least one location.

Launch Device Manager by typing its name into Search. To display the whole list of devices, look in the Disk Drives section and, if necessary, click the plus symbol. Unplug your drive safely, check that it is listed, and then plug it back in. Your LaCie hard drive is the entry that is changed.

Is there a strange icon next to your hard drive on the list? A: Windows Device Manager typically offers details on peripheral failures. Even though the Device Manager can help with debugging most issues, it does not always show the actual reason or offer a precise fix.

A problem can be detected by an odd icon next to the hard disk. For instance, it may have an exclamation point, question mark, or X in place of the icon often associated with the type of gadget. Click this icon’s right mouse button, then select Properties. The gadget might not be functioning as planned for a cause that can be found on the General tab.

How can I access a non-recognized external hard drive?

Unplug the drive and try a different USB port if it’s still not functioning. It’s likely that the problematic port is failing or simply being picky with your particular drive. Try a USB 2.0 port if it is plugged into a USB 3.0 port. Attempt inserting it directly into the PC if it is plugged into a USB hub. You might also attempt it on a different machine.

If your household uses multiple operating systems, I would highly advise trying it in a computer that uses a different operating system. For example, if you are having trouble getting the drive to appear on a Windows PC, try plugging it into a Mac. You may need to copy the data onto a drive that is formatted for cross-compatibility if the drive is simply not formatted for the computer you are attempting to use.

My Lacie hard drive is beeping, why?

Many people are unaware that Lacie does not produce its own drives. The majority of Lacie drives really have a Seagate drive inside a Lacie brand name or container.

Both 3.5″ and 2.5″ drives are available. The motor of Seagate’s smaller 2.5″ drives won’t turn if the sliders or heads are on the platter. You will hear beeping whenever the sliders or heads are stuck to the plate.

If the drive is dropped, mishandled, or hit, it is typical for the sliders or heads to become trapped on the platter. 3.5″ drives are more durable than 2.5″ drives. In a 2.5″ drive, the motor cannot spin if something is on the platter, as it would in a 3.5″ drive, which is why it beeps.

There is a considerable possibility of success if the drive hasn’t been opened. However, hitting the drive to remove stuck heads frequently results in irreparable platter damage. Once the disk has started beeping, a $300 recovery might become a $1000 recovery if it is mishandled or if shoddy repairs are attempted.

What equipment do I need to disassemble a hard drive?

To get started, you simply need a few simple tools. You will need: Some hard drives to deconstruct.

  • Flat-head screwdriver: Useful for unscrewing the armature and prying apart the casing (see below).
  • The case and magnet screws must be removed using a precision or Torx screwdriver set.
  • pliers or vice grips were required to separate the magnets from their packaging.

Many of these tools may already be in your possession. The precision/torx screwdriver set is the only truly specialized tool that is required. This is required to remove the unique screws in the shape of stars. These screws serve as security measures to prevent tampering by individuals like you and me. However, given that you can get the required screwdrivers on Amazon or at your neighborhood hardware store, they plainly don’t function very well as a security deterrent.

Can an external hard drive be disassembled?

In order to shuck an external hard drive, the external enclosure must be taken apart and the raw hard drive extracted. The drive can then be used in your NAS, PC, or home server from there. This method demonstrates how to take out the hard drive without damaging the enclosure.

A wonderful option to gain a lot of storage at a lower cost is to buy external hard drives. Many external hard drives use server-grade hard drives, which are almost twice as expensive when bought separately from the external container.

A deepscan for faulty sectors should be performed on the external drive before shucking using a tool like HD Tune Pro or Stablebit Scanner. Return the drive to the seller or manufacturer if any faults are found.